Custom Query (1556 matches)
Results (457 - 459 of 1556)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1311 | duplicate | Crucial MX500 firmware M3CR010 also returns bogus attribute 197 | ||
| Description |
#1227 prompted attribute 197 to be ignored for some Crucial MX500 drives, but not mine, despite mine exhibiting the same broken behaviour of an oscillating pending sector count.
The model number of my drive is CT1000MX500SSD1, and it has firmware M3CR010. Currently the drivedb only ignores the attribute for firmwares matching |
|||
| #1314 | fixed | Add support for JMS56x RAID | ||
| Description |
I have this device: https://www.speeddragon.com/index.php?controller=Default&action=ProductInfo&Id=590 Actually, it'a a clone from this: https://www.sybausa.com/index.php?route=product/product&path=64_148&product_id=850 It has a JMicron JMS562 chip. If i modify some parameters in dev_jmb39x_raid, it works. SCRAMLED_CMD: 0x197b0562 CRC: 0xde10952b |
|||
| #1315 | fixed | Add support for Realtek RTL9210 USB to NVMe bridge | ||
| Description |
Hello! I have a RTL9210 based NVME to USB adapter and would like to request for this chip to be supported by Smartmontools. I googled around but did not find any prior discussion about this particular adapter type. Here is output from my adapter with an NVME drive installed: # sudo smartctl -x -d scsi /dev/disk/by-id/usb-Samsung_SSD_960_EVO_250G_012345678905-0\:0 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-3-amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: Samsung Product: SSD 960 EVO 250G Revision: CXE7 Compliance: SPC-4 User Capacity: 250,059,350,016 bytes [250 GB] Logical block size: 512 bytes Physical block size: 8388608 bytes Lowest aligned LBA: 10016 LU is fully provisioned [LBPRZ=1] Rotation Rate: Solid State Device Logical Unit id: 0x3001237923792379 Serial number: 0000000000000000 Device type: disk Local Time is: Sun Apr 5 21:01:15 2020 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported Read Cache is: Enabled Writeback Cache is: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported Device does not support Self Test logging Device does not support Background scan results logging The USB ID is 0bda:9210. Let me know if you want full lsusb -vv output. Orico has two models with this chip; the PFM2-C3 and the M2PG-C3. Pluaggable has switched their USBC-NVME from using the JMicron JMS583 to the RTL9210. JEYI makes the i9 GTR and and another where I'm not sure what the model number is. And finally there's a ton of cheapo no-name Chinese brand adapters on the market. If there is anything I can do to help make this happen, please ask! |
|||
