Custom Query (1494 matches)
Results (376 - 378 of 1494)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1131 | fixed | Micron 1100 SSD not recognized | ||
| Description |
On a laptop with a 1TB Micron 1100 SATA SSD, the device is not recognized. The Micron 1100 models are present in drivedb, but the format is different: "Micron_1100_MTFDDA[KV](256|512|1T0|2T0)TBN|" // Marvell 88SS1074, tested Micron_1100_MTFDDAK256TBN/M0MU020 Model: Micron 1100 SATA I attached the output of smartctl. |
|||
| #1133 | fixed | Add to drivedb - Intel SSDSCKKB240G8 (And series) | ||
| Description |
Some Intel drives to be added to drivedb.h. I closed my earlier submissions because they didn't provide the helpful information needed for a quick turnaround. For this submission, I have attached a tested change to drivedb.h in the form of a text file along with the complete reports for all three drives (the smartctl -x /dev/sdX command being run with my modificaiton applied.) The only modification is now the model family for these drives will display correctly in a smartmontools report (edited the model string options). I hope this is more adequate than last time! |
|||
| #1136 | fixed | Add support for Goodram IRDM (IR-SSDPR-S25A-..., Phison PS3111-S11) | ||
| Description |
It'll be good to display correctly raw # of block erase count (attribute 173, value = <Avg. block erase count> * 0x10000 + <Max. block erase count>), and correct name of attribete 241 (GBs written) and 192 (unsafe power shutdowns) It seems like all Phison S11-based SSDs uses same raw attribute calculation, and can be identified by firmware version (SBFMxx.x) smartctl report: # smartctl -x /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-gentoo] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: IR-SSDPR-S25A-240
Serial Number: GSZ039696
LU WWN Device Id: 0 000000 000000000
Firmware Version: SBFM91.2
User Capacity: 240.057.409.536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Nov 23 20:40:10 2018 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (65535) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
9 Power_On_Hours -O--C- 100 100 000 - 217
12 Power_Cycle_Count -O--C- 100 100 000 - 50
168 Unknown_Attribute -O--C- 100 100 000 - 0
170 Unknown_Attribute PO---- 082 082 010 - 327
173 Unknown_Attribute -O--C- 100 100 000 - 131076
192 Power-Off_Retract_Count -O--C- 100 100 000 - 1
194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33)
218 Unknown_Attribute PO-R-- 100 100 050 - 0
231 Temperature_Celsius PO--C- 100 100 000 - 99
241 Total_LBAs_Written -O--C- 100 100 000 - 473
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 210 -
# 2 Short offline Completed without error 00% 86 -
# 3 Extended offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 50 --- Lifetime Power-On Resets
0x01 0x010 4 217 --- Power-on Hours
0x01 0x018 6 993201644 --- Logical Sectors Written
0x01 0x028 6 100992808 --- Logical Sectors Read
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 33 --- Current Temperature
0x05 0x020 1 33 --- Highest Temperature
0x05 0x028 1 33 --- Lowest Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 154 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|||
Note:
See TracQuery
for help on using queries.
