Custom Query (1564 matches)

my disk is:

Model Family:     Seagate Momentus 5400.6
Device Model:     ST9500325AS
Serial Number:    6VE28ZKM
LU WWN Device Id: 5 000c50 018cbece4
Firmware Version: 0002SDM1
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Thu Sep 27 01:03:18 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown

so it has:

$ sudo fdisk -l /dev/sda
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes

Report from '-l error' say:

---------------------------
Error 50 occurred at disk power-on lifetime: 21702 hours (904 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  24 00 01 ff ff ff ef 00      00:40:02.086  READ SECTOR(S) EXT
  61 00 08 ff ff ff 4f 00      00:39:58.630  WRITE FPDMA QUEUED
  61 00 10 ff ff ff 4f 00      00:39:58.630  WRITE FPDMA QUEUED
  61 00 08 ff ff ff 4f 00      00:39:58.629  WRITE FPDMA QUEUED
  61 00 08 ff ff ff 4f 00      00:39:58.629  WRITE FPDMA QUEUED

While report from '-l xerror' say:

----------------------------------
Error 50 [9] occurred at disk power-on lifetime: 21702 hours (904 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 34 fc 00 a1 04 00 00  Error: UNC at LBA = 0x34fc00a104 = 227566199044

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  24 00 00 00 01 00 34 fc 00 a1 04 e0 00     00:40:02.086  READ SECTOR(S) EXT
  61 00 00 00 08 00 36 d1 00 77 f8 40 00     00:39:58.630  WRITE FPDMA QUEUED
  61 00 00 00 10 00 36 d1 00 77 c8 40 00     00:39:58.630  WRITE FPDMA QUEUED
  61 00 00 00 08 00 2f e6 00 af 90 40 00     00:39:58.629  WRITE FPDMA QUEUED
  61 00 00 00 08 00 2f e3 00 af d8 40 00     00:39:58.629  WRITE FPDMA QUEUED

The '-l error' seems limited by the 0x0fffffff limitation, but the '-l xerror' LBA=227566199044 is greather than max disk sector=976773168.

Report from '-l selftest' show the right LBA bad sector:

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Self-test routine in progress 40%     21708         -
# 2  Extended offline    Completed: read failure       20%     21693         883031044

Also report from '-l xselftest' show the right LBA bad sector:

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Self-test routine in progress 40%     21708         -
# 2  Extended offline    Completed: read failure       20%     21693         883031044

Adding CT120BX500SSD1 to the db Info: ​https://forums.crucial.com/t5/Crucial-SSDs/MX500-SMART-parameters/td-p/184287 (mx500 is probably the same) and ​https://listi.jpberlin.de/pipermail/smartmontools-database/2018-April/000176.html

Dell ships / shipped Intel drives with an R instead of T in the model string.