Custom Query (1494 matches)

There is no information about this drive in the database. Link to device specification: ​https://www.sandisk.com/home/ssd/ultra-3d-ssd#specifications-section

Product numbers:

• 250 GB: SDSSDH3-250G-G25
• 500 GB: SDSSDH3-500G-G25
• 1 TB: SDSSDH3-1T00-G25
• 2 TB: SDSSDH3-2T00-G25

Controller: Marvell 88SS1074

Seems to be the very same drive as WD Blue 3D NAND SATA SSD with different branding.

Could you please add this hard drive to the database?

my disk is:

Model Family:     Seagate Momentus 5400.6
Device Model:     ST9500325AS
Serial Number:    6VE28ZKM
LU WWN Device Id: 5 000c50 018cbece4
Firmware Version: 0002SDM1
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Thu Sep 27 01:03:18 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown

so it has:

$ sudo fdisk -l /dev/sda
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes

Report from '-l error' say:

---------------------------
Error 50 occurred at disk power-on lifetime: 21702 hours (904 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  24 00 01 ff ff ff ef 00      00:40:02.086  READ SECTOR(S) EXT
  61 00 08 ff ff ff 4f 00      00:39:58.630  WRITE FPDMA QUEUED
  61 00 10 ff ff ff 4f 00      00:39:58.630  WRITE FPDMA QUEUED
  61 00 08 ff ff ff 4f 00      00:39:58.629  WRITE FPDMA QUEUED
  61 00 08 ff ff ff 4f 00      00:39:58.629  WRITE FPDMA QUEUED

While report from '-l xerror' say:

----------------------------------
Error 50 [9] occurred at disk power-on lifetime: 21702 hours (904 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 34 fc 00 a1 04 00 00  Error: UNC at LBA = 0x34fc00a104 = 227566199044

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  24 00 00 00 01 00 34 fc 00 a1 04 e0 00     00:40:02.086  READ SECTOR(S) EXT
  61 00 00 00 08 00 36 d1 00 77 f8 40 00     00:39:58.630  WRITE FPDMA QUEUED
  61 00 00 00 10 00 36 d1 00 77 c8 40 00     00:39:58.630  WRITE FPDMA QUEUED
  61 00 00 00 08 00 2f e6 00 af 90 40 00     00:39:58.629  WRITE FPDMA QUEUED
  61 00 00 00 08 00 2f e3 00 af d8 40 00     00:39:58.629  WRITE FPDMA QUEUED

The '-l error' seems limited by the 0x0fffffff limitation, but the '-l xerror' LBA=227566199044 is greather than max disk sector=976773168.

Report from '-l selftest' show the right LBA bad sector:

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Self-test routine in progress 40%     21708         -
# 2  Extended offline    Completed: read failure       20%     21693         883031044

Also report from '-l xselftest' show the right LBA bad sector:

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Self-test routine in progress 40%     21708         -
# 2  Extended offline    Completed: read failure       20%     21693         883031044