Custom Query (1546 matches)
Results (250 - 252 of 1546)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1659 | fixed | WD-Blue-SA510 not in smartctl database | ||
| Description |
Hi there, WD-Blue-SA510 is not in smartctl database I also get the warning SMART ATA Error Log Structure error: invalid SMART checksum but that's a minor issue, I guess. Thank you in advance and keep up the good work! smartctl -x: smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-18-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WD Blue SA510 2.5 1000GB
Serial Number: 22243V460411
LU WWN Device Id: 5 001b44 4a543d67b
Firmware Version: 52008100
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-4, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Oct 17 21:51:28 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 14
12 Power_Cycle_Count -O--CK 100 100 000 - 18
165 Unknown_Attribute -O--CK 100 100 000 - 524294
166 Unknown_Attribute -O--CK 100 100 000 - 0
167 Unknown_Attribute -O--CK 100 100 000 - 36
168 Unknown_Attribute -O--CK 100 100 000 - 1
169 Unknown_Attribute -O--CK 100 100 000 - 372
170 Unknown_Attribute -O--CK 100 100 000 - 0
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
173 Unknown_Attribute -O--CK 100 100 005 - 0
174 Unknown_Attribute -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 100 100 014 - 28 (Min/Max 18/31)
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
230 Unknown_SSD_Attribute -O--CK 100 100 000 - 4294967297
232 Available_Reservd_Space PO--CK 100 100 004 - 85
233 Media_Wearout_Indicator -O--CK 100 100 000 - 102
234 Unknown_Attribute -O--CK 100 100 000 - 229
241 Total_LBAs_Written ----CK 253 253 000 - 205
242 Total_LBAs_Read ----CK 253 253 000 - 16
244 Unknown_Attribute -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa1 GPL,SL VS 1 Device vendor specific log
0xa2 GPL,SL VS 2 Device vendor specific log
0xa3-0xa7 GPL,SL VS 1 Device vendor specific log
0xde GPL,SL VS 1 Device vendor specific log
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 14 -
# 2 Short offline Completed without error 00% 12 -
# 3 Extended offline Completed without error 00% 12 -
# 4 Short offline Completed without error 00% 11 -
# 5 Extended offline Completed without error 00% 10 -
# 6 Short offline Completed without error 00% 8 -
# 7 Short offline Completed without error 00% 8 -
# 8 Extended offline Completed without error 00% 8 -
# 9 Short offline Completed without error 00% 7 -
#10 Short offline Completed without error 00% 7 -
#11 Short offline Completed without error 00% 7 -
#12 Extended offline Completed without error 00% 6 -
#13 Short offline Completed without error 00% 3 -
#14 Short offline Completed without error 00% 3 -
#15 Extended offline Completed without error 10% 3 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (empty) ==
0x05 ===== = = === == Temperature Statistics (empty) ==
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|||
| #1657 | fixed | Add new rule of Apacer SSDs to drivedb | ||
| Description |
Hi, I am Apacer software engineer. Here are some new rules need to be added to the drivedb.h The following is modified from current version(v7.3) of drivedb.h { "Apacer SSDs",
"([1248]|1[056]|20|3[02]|40|60|64|80|12[08]|160|240|256|320|480|512|640|960|1024|1280|1920|2048|3840|4096)(GB|TB) SATA Flash Drive|"
"S[GHTV]250-(M2[48][02]|25) ([1248]|1[056]|20|3[02]|40|60|64|80|12[08]|160|240|256|320|480|512|640|960|1024|1280|1920|2048|3840|4096)(GB|TB) SSD", // tested with 120GB SATA Flash Drive/SFMB6130, SH250-M242 128GB SSD/SFMB8120, ST250-M280 256GB SSD/SFMD6110
"SFM[BCDEGHJ][0-9A-Z][0-9A-Z][1-9A-Z][0-9A-Z]",
"",
//"-v 9,raw24(raw8),Power_On_Hours "
//"-v 12,raw48,Power_Cycle_Count "
"-v 163,raw48,Maximum_Erase_Count "
"-v 164,raw48,Average_Erase_Count "
"-v 166,raw48,Total_Later_Bad_Blk_Ct "
"-v 167,raw48,SSD_Protect_Mode "
"-v 168,raw48,SATA_PHY_Error_Count "
"-v 171,raw48,Program_Fail_Count "
"-v 172,raw48,Erase_Fail_Count "
"-v 175,raw48,Bad_Cluster_Table_Ct "
"-v 192,raw48,Unexpect_Power_Loss_Ct "
//"-v 194,tempminmax,Temperature_Celsius "
"-v 231,raw48,Lifetime_Left "
//"-v 241,raw48,Total_LBAs_Written "
}
Or you could refer apacer_drivedb.h and smartctl_x_output.txt that are in the attachment. If you need any more information, please let me know. Thanks for your help. Best Regards, Kobe |
|||
| #1656 | fixed | Add Netac Z Slim (Netac MobileDataStar, 0x0dd8:0x0562) | ||
| Description |
smartctl prints "Unknown USB bridge", but "-d sat" works fine (with UAS disabled). I didn't find a datasheet or something, but CrystalDiskInfo shows these attribute names: SmartSiliconMotion Product page: https://www.netac.com/product/Z-Slim-32.html |
|||
Note:
See TracQuery
for help on using queries.
