Custom Query (1541 matches)

~]$ sudo smartctl -a /dev/sdg
smartctl 7.1 2020-04-05 r5049 [x86_64-linux-4.18.0-425.3.1.el8.x86_64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              DKS2E-H4R0SS
Revision:             7FA6
Compliance:           SPC-3
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c50085880b2f
Serial number:        Z1ZB2BGT0000R627VEN0
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Feb  3 09:09:33 2023 CET
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Elements in grown defect list: 2

Error Counter logging not supported


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging
[bartosz@nas ~]$ scsi_temperature /dev/sdf
sg_logs -t  /dev/sdf
error opening file: /dev/sdf: Permission denied 
sg_logs failed: Permission denied

~]$ sudo scsi_temperature /dev/sdg
sg_logs -t  /dev/sdg
    SEAGATE   DKS2E-H4R0SS      7FA6
  Current temperature = 43 C
  Reference temperature = 68 C
~]$ 

~]$ lspci |grep -i sas
02:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)

This fault is similar #1346.

Witch version working property with my SAS Disk?

​https://www.toshiba-storage.com/products/toshiba-internal-hard-drives-x300/