Custom Query (1560 matches)

This one must be very similar to the Vi550 that is already in the db (#1629).

Good afternoon,

Here is some information, along with the attached output from "lsusb -v" for the Argon EON case's USB-to-SATA bridge (which shows up as two devices) that is not in the current database.

When I add both entries to my custom database file, the disks connected to these bridges seem to support at least a few SMART features and tests. Since they are bridges, I have no "smartctl -x" output for them, but can provide this output for the attached disks if requested.

• "Pinas sata"
  • ID: 0x174e:0x1155
  • Notes: with "-d sat", the attached /dev/sdX devices are visible to smartctl and everything I've checked seems to work fine.

• "Pinas SATA"
  • ID: 0x1741:0x1156
  • Notes: see previous

Tested using smartctl 7.2 r5155 on aarch64-linux-6.1.61-v8+, host: aarch64-unknown-linux-gnu (Raspberry Pi 4B).

If you have any questions or want additional info/tests, please let me know -- and thank you for all your hard work!

Good afternoon,

Here is some information, along with the attached outputs from "smartctl -x" and "lsusb -v" for the following USB HDD that is not in the current database, but supports (at least some) SMART features once I added it to my custom database file:

Seagate RSS LLC FireCuda Gaming Hard Drive:

• Serial_Number: 00000000NAD30K0B
• Device ID: 0x0bc2:0x2021
• Notes: with "-d scsi", is visible to smartctl and can run tests, but without temperature monitoring.

Tested using smartctl 7.2 r5155 on aarch64-linux-6.1.61-v8+, host: aarch64-unknown-linux-gnu (Raspberry Pi 4B).

If you have any questions or want additional info/tests, please let me know -- and thank you for all your hard work!