Custom Query (1386 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (139 - 141 of 1386)

Ticket Resolution Summary Owner Reporter
#1624 fixed Drive not in database: Samsung SSD MZ7WD960HCGP Christian Franke jchamb2010
Description
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.13.19-6-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG MZ7WD960HCGP-000PU
Firmware Version: DXM9BW4Q
User Capacity:    960,197,124,096 bytes [960 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Jun 16 11:24:46 2022 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Disabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 4200) seconds.
Offline data collection
capabilities: 			 (0x53) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  70) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  9 Power_On_Hours          -O--CK   088   088   000    -    56003
 12 Power_Cycle_Count       -O--CK   099   099   000    -    32
177 Wear_Leveling_Count     PO--C-   099   099   005    -    44
179 Used_Rsvd_Blk_Cnt_Tot   PO--C-   100   100   010    -    0
180 Unused_Rsvd_Blk_Cnt_Tot PO--C-   100   100   010    -    20992
181 Program_Fail_Cnt_Total  -O--CK   100   100   000    -    0
182 Erase_Fail_Count_Total  -O--CK   100   100   000    -    0
183 Runtime_Bad_Block       PO--C-   100   100   010    -    0
184 End-to-End_Error        PO--CK   100   100   097    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
190 Airflow_Temperature_Cel -O--CK   074   074   000    -    26
195 Hardware_ECC_Recovered  -O-RC-   200   200   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   100   100   000    -    0
202 Unknown_SSD_Attribute   PO--CK   100   100   010    -    0
235 Unknown_Attribute       -O--C-   099   099   000    -    26
241 Total_LBAs_Written      -O--CK   099   099   000    -    33170546903
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01       GPL,SL  R/O      1  Summary SMART error log
0x02       GPL,SL  R/O      1  Comprehensive SMART error log
0x03       GPL,SL  R/O      1  Ext. Comprehensive SMART error log
0x06       GPL,SL  R/O      1  SMART self-test log
0x07       GPL,SL  R/O      1  Extended self-test log
0x09       GPL,SL  R/W      1  Selective self-test log
0x10       GPL,SL  R/O      1  NCQ Command Error log
0x11       GPL,SL  R/O      1  SATA Phy Event Counters log
0x13       GPL,SL  R/O      1  SATA NCQ Send and Receive log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0       GPL,SL  VS      16  Device vendor specific log

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     55981         -
# 2  Short offline       Completed without error       00%     55957         -
# 3  Extended offline    Completed without error       00%     55955         -
# 4  Short offline       Completed without error       00%     55933         -
# 5  Short offline       Completed without error       00%     55909         -
# 6  Short offline       Completed without error       00%     55885         -
# 7  Short offline       Completed without error       00%     55861         -
# 8  Short offline       Completed without error       00%     55837         -
# 9  Short offline       Completed without error       00%     55813         -
#10  Short offline       Completed without error       00%     55789         -
#11  Extended offline    Completed without error       00%     55787         -
#12  Short offline       Completed without error       00%     55765         -
#13  Short offline       Completed without error       00%     55741         -
#14  Short offline       Completed without error       00%     55717         -
#15  Short offline       Completed without error       00%     55693         -
#16  Short offline       Completed without error       00%     55669         -
#17  Short offline       Completed without error       00%     55645         -
#18  Short offline       Completed without error       00%     55621         -
#19  Extended offline    Completed without error       00%     55619         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
  255        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
Device State:                        SCT command executing in background (5)
Current Temperature:                    26 Celsius
Power Cycle Min/Max Temperature:     25/31 Celsius
Lifetime    Min/Max Temperature:      0/70 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     3 (Unknown, should be 2)
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/70 Celsius
Min/Max Temperature Limit:            0/70 Celsius
Temperature History Size (Index):    128 (22)

Index    Estimated Time   Temperature Celsius
  23    2022-06-16 09:17    26  *******
  24    2022-06-16 09:18    26  *******
  25    2022-06-16 09:19    27  ********
  26    2022-06-16 09:20    26  *******
  27    2022-06-16 09:21    26  *******
  28    2022-06-16 09:22    27  ********
 ...    ..( 10 skipped).    ..  ********
  39    2022-06-16 09:33    27  ********
  40    2022-06-16 09:34    26  *******
 ...    ..( 44 skipped).    ..  *******
  85    2022-06-16 10:19    26  *******
  86    2022-06-16 10:20    25  ******
  87    2022-06-16 10:21    26  *******
  88    2022-06-16 10:22    26  *******
  89    2022-06-16 10:23    26  *******
  90    2022-06-16 10:24    25  ******
 ...    ..( 51 skipped).    ..  ******
  14    2022-06-16 11:16    25  ******
  15    2022-06-16 11:17    26  *******
  16    2022-06-16 11:18    25  ******
  17    2022-06-16 11:19    25  ******
  18    2022-06-16 11:20    26  *******
  19    2022-06-16 11:21    25  ******
  20    2022-06-16 11:22    25  ******
  21    2022-06-16 11:23    26  *******
  22    2022-06-16 11:24    26  *******

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2           31  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2           46  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC
#1622 invalid Get SMART attributes by id b10s
Description

Hi,

I'm trying to get SMART attributes 247 and 248 on my Samsung SSD 970 EVO Plus 1TB using smartctl (smartctl 7.3 2022-02-28 r5338): smartctl -A /dev/nvme0.

However can't find such data in output.

How to get SMART attributes 247 and 248?

reference: https://media-www.micron.com/-/media/client/global/documents/products/technical-note/solid-state-storage/tnfd23_m500_smart_attributes_calc_waf.pdf

#1619 duplicate Seagate Expansion 12 TB HDD - STKP12000400 - 0bc2:2038 ts46h
Description

smartctl reports this on given External HDD: Read Device Identity failed: scsi error unsupported field in scsi command So I think the attachment will not be of much use. But under Windows 10 I could use crystaldiskinfo to see smart data. Would it help to get a Wireshark pcapng with USB communication when using crystaldiskinfo to retrieve smart data? If you need some special stuff from Wireshark tell me please so I can create a helpful capture.

Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.