Custom Query (1357 matches)


Show under each result:

Results (40 - 42 of 1357)

Ticket Resolution Summary Owner Reporter
#1737 fixed JMicron ab12:34cd USB 3.0 Bridge needs -d sat Christian Franke lemonuk

Followup from here: dmesg log:

[Jul14 17:50] usb 2-1: new SuperSpeed USB device number 6 using xhci_hcd
[  +0.017371] usb 2-1: New USB device found, idVendor=ab12, idProduct=34cd, bcdDevice= 4.05
[  +0.000005] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  +0.000003] usb 2-1: Product: External Disk
[  +0.000001] usb 2-1: Manufacturer: USB30
[  +0.000002] usb 2-1: SerialNumber: 01600000002D
[  +0.005995] scsi host5: uas
[  +0.000514] scsi 5:0:0:0: Direct-Access     USB30                     0405 PQ: 0 ANSI: 6

This hardware is a SATA to USB adapter enclosure. Exact model: Sveon STG064 Laptop Hard Drive 2.5 Inch Silver in Red (2.5 - Hard Drive, SATA, Serial ATA II, Serial ATA III, 9.5 mm, Hard Drive, 2.0/3.0 (3.1 Gen 1), Hard Drive) Purchase link:

It requires some hard drive connected to SATA port when connecting the USB to the computer, otherwise dmesg does not output anything.


# smartctl -H /dev/sdf
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.4.6-arch1-1] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke,

/dev/sdf: Unknown USB bridge [0xab12:0x34cd (0x405)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

This works fine:

# smartctl -H /dev/sdf -d sat
#1736 fixed add drivedb WD40EFPX Gabriele Pohl jnsr

Product number: WD40EFPX


#1735 worksforme Support for RaidSonic ICY BOX IB-1922MF-C32 USB to NVMe bridge (0x174c:0x2364, ASM2364) bugs.bunny


I'm unsure if this is a request for an enhancement or a case like "works as designed". So I apologize in advance if I'm wrong.

I'm using two RaidSonic ICY BOX IB-1922MF-C32 USB to NVMe bridges which have an ASMedia ASM2364 chipset inside. smartmontool is able to print out some information (please see attached outputs). But what moved me to open this ticket are the last lines of the output:

Warning: NVMe Get Log truncated to 0x200 bytes, 0x200 bytes zero filled Error Information (NVMe Log 0x01, 16 of 256 entries)

No matter what tests I run, I don't get any attributes displayed.

Thank you in advance for your support! If you need additional information, outputs, ... please let me know!

Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.