Custom Query (1463 matches)
Results (355 - 357 of 1463)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1415 | fixed | Seagate Exos 7E8 missing from the database (ST8000NM000A, ...) | ||
| Description |
Hello. I purchased some Seagate Exos 7E8 hard drives, and I found this series is not in the database yet. I made a simple patch to include all models in the Seagate datasheet. root@freebsd:/usr/local/share/smartmontools # diff -up drivedb.h.orig drivedb.h
--- drivedb.h.orig 2020-12-20 23:43:03.000000000 +0800
+++ drivedb.h 2020-12-22 18:33:50.578993000 +0800
@@ -4195,6 +4195,37 @@ const drive_settings builtin_knowndrives[] = {
"", "",
"-v 9,msec24hour32 -v 240,msec24hour32"
},
+ // 512n SATA:
+ // Base: ST6000NM002A, ST4000NM000A, ST3000NM000A, ST2000NM000A
+ // ST1000NM000A
+ // Secure: ST4000NM006A, ST1000NM002A
+ // SED-FIPS: ST4000NM013A, ST3000NM004A
+ // 512n SAS:
+ // Base: ST6000NM003A, ST4000NM003A, ST3000NM001A, ST2000NM003A,
+ // ST1000NM001A
+ // Secure: ST4000NM007A, ST3000NM003A, ST2000NM007A
+ // SED-FIPS: ST4000NM015A, ST3000NM005A
+ // 512e SATA:
+ // Base: ST8000NM000A, ST6000NM021A, ST4000NM002A, ST2000NM001A,
+ // PowerBalance: ST8000NM016A
+ // Secure: ST8000NM004A, ST4000NM010A
+ // SED-FIPS: ST8000NM008A, ST6000NM025A, ST4000NM012A
+ // 512e SAS:
+ // Base: ST8000NM001A, ST6000NM029A, ST4000NM005A, ST2000NM004A.
+ // Secure: ST8000NM006A, ST4000NM011A
+ // SED-FIPS: ST8000NM010A, ST6000NM033A, ST4000NM014A
+ // 4Kn SATA:
+ // Base: ST8000NM002A, ST6000NM022A, ST4000NM001A, ST2000NM002A
+ // SED-FIPS: ST8000NM009A, ST6000NM026A
+ // 4Kn SAS:
+ // Base: ST8000NM003A, ST6000NM030A, ST4000NM004A, ST2000NM005A
+ // SED-FIPS ST8000NM011A, ST6000NM034A
+ { "Seagate Exos 7E8", // tested with ST8000NM000A-2KE101/SN02,
+ // ST6000NM021A-2R7101/SN02
+ "ST[864321]000NM0[0123][0123456789]A-.*",
+ "", "",
+ "-v 240,msec24hour32"
+ },
{ "Seagate Exos X12", // tested with ST12000NM0007-2A1101/SN02
"ST12000NM00[01]7-.*", // *17 = SED
"", "",
As commented, I tested it with my ST8000NM000A-2KE101/SN02 and ST6000NM021A-2R7101/SN02. After applying the patch, attribute 240 "Head Flying Hours" started to increment seconds by seconds, so it's probably correct. Also, I found "Power On Hours" looks like an hour-only integer value, even with "-v 9,msec24hour32", it's only reported at hour-precision, we probably don't need it, thus I didn't run the short SMART test. However, there's still an unknown attribute 18. I'm not sure if "Head Health" is the appropriate option, so I didn't add it. The full output of "smartctl -q noserial -x" for the two hard drives are attached, please double-check my patch, and see if whether attribute 18 "Head Health" is needed, thanks. |
|||
| #1414 | fixed | Drive database: Intenso SATA SSD (JAJS600M1TB) | ||
| Description |
This one: https://www.amazon.de/-/en/Intenso-High-Performance-Internal-SSD/dp/B01D3ACJ0M/ NB: seems to be broken after a week of use so don't buy it :) smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.18-1-MANJARO] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: JAJS600M1TB
Serial Number: AA202000..................1
Firmware Version: T0529A0
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Dec 18 09:18:24 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
9 Power_On_Hours -O--CK 100 100 050 - 298
12 Power_Cycle_Count -O--CK 100 100 050 - 9
160 Unknown_Attribute -O--CK 100 100 050 - 0
161 Unknown_Attribute PO--CK 100 100 050 - 100
163 Unknown_Attribute -O--CK 100 100 050 - 24
164 Unknown_Attribute -O--CK 100 100 050 - 2823
165 Unknown_Attribute -O--CK 100 100 050 - 201
166 Unknown_Attribute -O--CK 100 100 050 - 4
167 Unknown_Attribute -O--CK 100 100 050 - 14
168 Unknown_Attribute -O--CK 100 100 050 - 2000
169 Unknown_Attribute -O--CK 100 100 050 - 100
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
177 Wear_Leveling_Count -O--CK 100 100 050 - 0
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
192 Power-Off_Retract_Count -O--CK 100 100 050 - 8
194 Temperature_Celsius -O---K 100 100 050 - 30
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
197 Current_Pending_Sector -O--CK 100 100 050 - 0
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 16
232 Available_Reservd_Space -O--CK 100 100 050 - 100
241 Total_LBAs_Written ----CK 100 100 050 - 56938
242 Total_LBAs_Read ----CK 100 100 050 - 189911
245 Unknown_Attribute -O--CK 100 100 050 - 298890
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 88 Current Device Internal Status Data log
0x25 GPL R/O 32 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 17 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 17 [0] log entry is empty
Error 16 [3] log entry is empty
Error 15 [2] log entry is empty
Error 14 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 da 00 00 00 00 4f 00 c2 00 00 08 00:00:00.000 SMART RETURN STATUS
ec 00 00 01 01 00 00 00 00 00 00 00 08 00:00:00.000 IDENTIFY DEVICE
b0 00 d5 01 01 00 00 4f 00 c2 06 00 08 00:00:00.000 SMART READ LOG
b0 00 d5 01 01 00 00 4f 00 c2 01 00 08 00:00:00.000 SMART READ LOG
b0 00 d5 01 01 00 00 4f 00 c2 00 00 08 00:00:00.000 SMART READ LOG
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 298 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 9 --- Lifetime Power-On Resets
0x01 0x010 4 298 --- Power-on Hours
0x01 0x018 6 3731543014 --- Logical Sectors Written
0x01 0x020 6 4571944 --- Number of Write Commands
0x01 0x028 6 3856111046 --- Logical Sectors Read
0x01 0x030 6 77424900 --- Number of Read Commands
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
|||
| #1413 | fixed | Some SCSI Drives spin up when using -n option. | ||
| Description |
Some SCSI/SAS drives will spin up even if -n option is used. This does not affect all drives. I have noticed this only a SEAGATE drive at present. Issue can be resolved by moving the following code to after the check for -n
to after the -n check code. |
|||
Note:
See TracQuery
for help on using queries.
