Custom Query (1438 matches)
Results (337 - 339 of 1438)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1410 | fixed | Device Missing | ||
| Description |
Device Missing Sony HD-E1 root@Tower:~# smartctl /dev/sdb smartctl 7.2 2020-09-19 r5083 [x86_64-linux-5.8.18-Unraid] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sdb: Unknown USB bridge [0x054c:0x05bf (0x6610)] Please specify device type with the -d option. Use smartctl -h to get a usage summary root@Tower:~# smartctl -id sat /dev/sdb smartctl 7.2 2020-09-19 r5083 [x86_64-linux-5.8.18-Unraid] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: S318J9BG113647 LU WWN Device Id: 5 0004cf 20efbe3f1 Firmware Version: 2BA30001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Dec 11 11:23:42 2020 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled |
|||
| #1409 | fixed | SMART attribute 22 reported as "Unknown attribute" on recent WDC_WD120EDAZ hard drives | ||
| Description |
SMART attribute 22 is reported as "Unknown attribute" on recent WDC_WD120EDAZ hard drives. The SMART attribute 22 is generally called "Helium_Level" on similar models. Bellow is the SMART information for that device. smartctl -a /dev/sdl
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD120EDAZ-11F3RA0
Serial Number: 5PJJ7JPD
LU WWN Device Id: 5 000cca 291e3913e
Firmware Version: 81.00A81
User Capacity: 12,000,138,625,024 bytes [12.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Dec 11 11:25:34 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 87) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1251) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0004 127 127 054 Old_age Offline - 112
3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 0
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 6
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000a 100 100 067 Old_age Always - 0
8 Seek_Time_Performance 0x0004 140 140 020 Old_age Offline - 15
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 64
10 Spin_Retry_Count 0x0012 100 100 060 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5
22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 11
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 11
194 Temperature_Celsius 0x0002 180 180 000 Old_age Always - 36 (Min/Max 21/39)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|||
| #1408 | fixed | Add Apple OEM Hitachi 5K500.B to drivedb.h | ||
| Description |
The Apple OEM Hitachi 5K500.B parts (capacities in existence are HTS545016B9SA02, HTS545025B9SA02, HTS545032B9SA02, and HTS545050B9SA02) are currently unrecognized by drivedb.h. They can be recognized by changing (Hitachi )?HT[ES]5450(12|16|25|32|40|50)B9(A30[01]|SA00) to (Hitachi )?HT[ES]5450(12|16|25|32|40|50)B9(A30[01]|SA0[02])
I have not found reports of
Tested using HTS545025B9SA02 firmware version |
|||
Note:
See TracQuery
for help on using queries.
