Custom Query (1433 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (283 - 285 of 1433)

Ticket Resolution Summary Owner Reporter
#297 fixed Device data for Plextor M5S 128G SSD Christian Franke dword1511
Description

Sorry I am supposed to post this to the mailing list according to the wiki, but I really do not want to subscribe the list.

The device seems to have power-on hours in unit of 10-hours or so (I have used this for days without stop and it only shows 24), and it is said Total_LBAs_Written/Read is in 64MB, but no one knows for sure...

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.8.0-30-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Device Model: PLEXTOR PX-128M5S Firmware Version: 1.04 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Sep 25 21:23:47 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values: Offline data collection status: (0x00) Offline data collection activity

was never started. Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever been run.

Total time to complete Offline data collection: ( 10) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate.

No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported.

SMART capabilities: (0x0002) Does not save SMART data before

entering power-saving mode. Supports SMART auto save timer.

Error logging capability: (0x00) Error logging supported.

General Purpose Logging supported.

Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported.

SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported.

SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE

1 Raw_Read_Error_Rate PO---- 100 100 070 - 0 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0 9 Power_On_Hours -O---- 100 100 000 - 24

12 Power_Cycle_Count -O---- 100 100 000 - 6

177 Wear_Leveling_Count PO---- 100 100 000 - 1801 178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0 181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0 182 Erase_Fail_Count_Total PO---- 100 100 000 - 0 187 Reported_Uncorrect -O---- 100 100 000 - 0 192 Power-Off_Retract_Count PO---- 100 100 000 - 4 196 Reallocated_Event_Count PO---- 100 100 000 - 0 198 Offline_Uncorrectable PO---- 100 100 000 - 0 199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0 232 Available_Reservd_Space PO---- 100 100 010 - 0 241 Total_LBAs_Written PO---- 100 100 000 - 5237 242 Total_LBAs_Read PO---- 100 100 000 - 2045

_ K auto-keep
| C event count
_ R error rate
| S speed/performance
_ O updated online

| P prefailure warning

General Purpose Log Directory Version 0 SMART Log Directory Version 0 Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 1 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 0 No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 0 - # 2 Short offline Completed without error 00% 0 -

Selective Self-tests/Logging not supported

SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (0)

Index Estimated Time Temperature Celsius

1 2013-09-25 19:16 ? -

... ..(126 skipped). .. -

0 2013-09-25 21:23 ? -

SCT Error Recovery Control:

Read: 2 (0.2 seconds)

Write: 2 (0.2 seconds)

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 35 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

#298 fixed [patch] Fix for Seagate drives in drivedb.h Christian Franke seanprees
Description

I've a Seagate ST2000DM001-1CH164 and it generates the following warning from smartd and smartctl: ep 29 11:46:00 freyr smartd[1093]: Device: /dev/ada5, WARNING: A firmware update for this drive may be available, Sep 29 11:46:00 freyr smartd[1093]: see the following Seagate web pages: Sep 29 11:46:00 freyr smartd[1093]: http://knowledge.seagate.com/articles/en_US/FAQ/207931en Sep 29 11:46:00 freyr smartd[1093]: http://knowledge.seagate.com/articles/en_US/FAQ/223651en

Having a look at the second link, the firmware update only applies to a specific part number (9YN166 and friends). My drive is a ST2000DM001-1CH164 (part 1CH164) and is up-to-date according to Seagate. Currently using smartmontools 6.2.

I've modified drivedb.h in order to accommodate, see attached patch.

#300 fixed Fails to build on QNX 6.3.2 Christian Franke mkraai
Description

When I try to build revision 3851 on QNX 6.3.2, it fails with the following error messages:

source='smartctl.cpp' object='smartctl.o' libtool=no \
DEPDIR=.deps depmode=gcc /bin/sh ./depcomp \
QCC -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/usr/local/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/local/share/smartmontools"'    -I./getopt -DHAVE_GETOPT_LONG -D__GNU_LIBRARY__    -g -O2 -Wall -W -c -o smartctl.o smartctl.cpp
smartctl.cpp: In function `const char* parse_options(int, char**, 
   ata_print_options&, scsi_print_options&, bool&)':
smartctl.cpp:397: error: `free' undeclared (first use this function)
smartctl.cpp:397: error: (Each undeclared identifier is reported only once for 
   each function it appears in.)
cc: /usr/qnx632/host/qnx6/x86/usr/lib/gcc-lib/i386-pc-nto-qnx6.3.0/3.3.5/cc1plus error 1

If I modify smartctl.cpp to include stdlib.h, it builds successfully.

Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.