Custom Query (1452 matches)
Results (274 - 276 of 1452)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #287 | invalid | selective test percentage | ||
| Description |
SMART Selective self-test log data structure revision number 1
Says 10% left when it's not even close (314572801-629145601 but it's still at 373710487). Is this some bug in smartd or just the HDD (Western Digital Green 2TB / 3TB, they all show the same behavior) reporting it wrong? Couldn't smartd calculate the correct percentage given it seems to know the current position? I'm trying to use select tests in smartd.conf as a full extended test just takes too long in one go. I wish I could specify the size directly there so I don't have to worry about it getting confused as to which size/address to use (which seems to happen a lot and doesn't raise an error - I'm already using savestates). Like when I do select tests outside of smartd for other reasons (when there was an I/O error at a specific address). It shouldn't use that as a reference for its own tests... |
|||
| #288 | invalid | Remove failure notice for Attribute 190 | ||
| Description |
Seagate is requesting that the failure notice on attribute 190 be removed or somehow be tagged with an 'information only' descriptor. The attribute isn't warrantable and isn't an indicator of drive failure. During customer qualifications, our drives are being failed because they see that this attribute has 'failed in the past'. |
|||
| #289 | wontfix | Intel 520 Series SSDs incorrect Power_On_Hours_and_Msec | ||
| Description |
On Intel 520 series SSD's Power On Hours is displayed incorrectly: smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.0.88-1.el5.elrepo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Intel 520 Series SSDs
Device Model: INTEL SSDSC2CW240A3
Serial Number: CVCV31900700240CGN
LU WWN Device Id: 5 5cd2e4 00010475d
Firmware Version: 400i
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jul 30 23:03:56 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VAL
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
9 Power_On_Hours_and_Msec 0x0032 000 000 000 Old_age Always - 894836h
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5
170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 5
184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 5
225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 638
226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 65535
227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 93
228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 65535
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0
241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 638
242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 8652
249 NAND_Writes_1GiB 0x0013 100 100 000 Pre-fail Always - 12
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|||
