Custom Query (1365 matches)

Both of these disks report taking 255 minutes to complete the long (extended) self-test:

0 root@monkey:~# smartctl -t long /dev/sdd
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 255 minutes for test to complete.
Test will complete after Tue Nov 22 04:31:37 2011

Use smartctl -X to abort test.
0 root@monkey:~# smartctl -t long /dev/sdb
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 255 minutes for test to complete.
Test will complete after Tue Nov 22 04:31:41 2011
0 root@monkey:~# 

However, their internal firmware believes that the amount of time taken varies significantly (686 and 506 minutes respectively, if i'm reading this output correctly):

0 root@monkey:~# smartctl -a /dev/sdb | egrep -A1 'START OF INFO|Total time'
=== START OF INFORMATION SECTION ===
Device Model:     WDC WD2003FYYS-02W0B0
--
Total time to complete Offline 
data collection:                 (30360) seconds.
0 root@monkey:~# smartctl -a /dev/sdd | egrep -A1 'START|Total\ time'
=== START OF INFORMATION SECTION ===
Device Model:     WDC WD2002FYPS-02W3B0
--
Total time to complete Offline 
data collection:                 (41160) seconds.
0 root@monkey:~# 

This makes me think that the report of 255 minutes is flawed (maybe capped by an unsigned char or something?)

This is using stock debian squeeze:

0 root@monkey:~# uname -a
Linux monkey 2.6.32-5-vserver-amd64 #1 SMP Mon Oct 3 06:23:01 UTC 2011 x86_64 GNU/Linux
0 root@monkey:~# smartctl --version
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

smartctl comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
the terms of the GNU General Public License Version 2.
See http://www.gnu.org for further details.

smartmontools release 5.40 dated 2009-12-09 at 21:00:32 UTC
smartmontools SVN rev 3124 dated 2010-07-12 at 19:21:00
smartmontools build host: x86_64-unknown-linux-gnu
smartmontools build configured: 2010-12-26 11:52:46 UTC
smartctl compile dated Dec 26 2010 at 11:53:03
smartmontools configure arguments:  '--prefix=/usr' '--sysconfdir=/etc' '--mandir=/usr/share/man' '--with-initscriptdir=/etc/init.d' '--with-docdir=/usr/share/doc/smartmontools' '--enable-drivedb' '--enable-savestates' '--enable-attributelog' '--with-savestates=/var/lib/smartmontools/smartd.' '--with-attributelog=/var/lib/smartmontools/attrlog.' '--with-selinux' 'CXXFLAGS=-g -O2' 'LDFLAGS=' 'CPPFLAGS=' 'CFLAGS=-g -O2 -fsigned-char -Wall -O2'
0 root@monkey:~# 

This is possibly related to tickets 46, 140, 197. I am prepared to provide followup and debugging info. Email on cc list is fastest way to get my attention.

Just compiled smartmontools 5.42 on CentOS 5.6, on a SuperMicro blade server with the LSI 2108 MegaRAID type raid controller.

[root@36d sbin]# ./smartctl -a -d megaraid,0 -T permissive /dev/sg0 smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.18-238.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, ​http://smartmontools.sourceforge.net

Smartctl open device: /dev/sg0 [megaraid_disk_00] failed: INQUIRY failed

I've tried megaraid,N for N=1 to 32; saw notes that some devices start enumerating at 8 and tried that additionally, iterated through with /dev/sg0 /dev/sg1. No good.

Not sure if this is an underlying bug or user error on my part, but I have tried everything I am aware of and have found on the net so far without success.

Additional info:

[root@36d sbin]# lsscsi -g [0:2:0:0] disk LSI AOC-USAS2LP-H8iR 2.40 /dev/sda /dev/sg0 [0:2:1:0] disk LSI AOC-USAS2LP-H8iR 2.40 /dev/sdb /dev/sg1 [0:2:5:0] disk LSI AOC-USAS2LP-H8iR 2.40 /dev/sdg /dev/sg5

[root@36d sbin]# /opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -a0 Adapter #0

==============================================================================

Versions

================

Product Name : LSI MegaRAID SAS PCI Express ROMB Serial No : FW Package Build: 12.4.0-0012

Mfg. Data

================

Mfg. Date : 00/00/00 Rework Date : 00/00/00 Revision No : Battery FRU : N/A

Image Versions in Flash: ================

BIOS Version : 3.10.00 FW Version : 2.40.03-0787 Preboot CLI Version: 04.03-002:#%00008 WebBIOS Version : 6.0-3-e_0-Rel NVDATA Version : 2.03.0047 Boot Block Version : 2.02.00.00-0000 BOOT Version : 01.250.04.219

Pending Images in Flash ================

None

PCI Info ================

Vendor Id : 1000 Device Id : 0079 SubVendorId : 15d9 SubDeviceId : 0700

Host Interface : PCIE

Number of Frontend Port: 0 Device Interface : PCIE

Number of Backend Port: 8 Port : Address 0 50014ee30009d246 1 4433221105000000 2 4433221104000000 3 0000000000000000 4 50014ee30009d08e 5 0000000000000000 6 0000000000000000 7 0000000000000000

HW Configuration ================

SAS Address : 500304800088aaa0 BBU : Absent Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 512MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Absent Temperature sensor for controller : Absent

Settings ================

Current Time : 3:51:7 11/23, 2011 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : 1GB Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Disabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Disabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 0 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No

Capabilities ================

RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA

Allowed Mixing:

Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Mix of SAS/SATA of SSD type in VD Allowed Mix of SSD/HDD in VD Allowed

Status ================

ECC Bucket Count : 0

Limitations ================

Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 0 MB

Device Present ================

Virtual Drives : 2

Degraded : 0 Offline : 0

Physical Devices : 5

Disks : 4 Critical Disks : 0 Failed Disks : 0

Supported Adapter Operations ================

Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : Yes Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : No Support PI : No Support Boot Time PFK Change : No Disable Online PFK Change : No Support Shield State : No Block SSD Write Disk Cache Change: No

Supported VD Operations ================

Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : Yes Support Breakmirror : No Power Savings : No

Supported PD Operations ================

Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : No Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : No

Error Counters ================

Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0

Cluster Information ================

Cluster Permitted : No Cluster Active : No

Default Settings ================

Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Enabled Cached IO : Yes SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : 1GB ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : Yes Allow HDD/SSD Mix in VD : Yes Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : No Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : Yes Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : All power saving options are enabled Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : No Time taken to detect CME : 60s

Exit Code: 0x00

Please set correct attribute names for OCZ3 series drives according to ​http://www.ocztechnologyforum.com/forum/showthread.php?75786-SMART-Attributes-for-SandForce-SSD-s-%28Agility2-Vertex2-VertexLE%29. Attribute names are the same as for OCZ2 as I see.

As I see Corsair Force 3 has the same attributes list.

START OF INFORMATION SECTION

Device Model: OCZ-VERTEX3 MI Serial Number: OCZ-F78211ESI90IP3Q7 LU WWN Device Id: 5 e83a97 fdd8e8f7b Firmware Version: 2.15 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Tue Nov 29 15:34:34 2011 NOVT SMART support is: Available - device has SMART capability. SMART support is: Enabled

[...]

SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 090 090 050 Pre-fail Always - 190220790 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 164273909138055

12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2

171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 3 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0 181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (0 127 0 129 0) 195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 190220790 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 190220790 204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 190220790 230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 100 231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 750 234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 1620 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 1620 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 2922

START OF INFORMATION SECTION

Device Model: Corsair Force 3 SSD Serial Number: 11236500000006822030 LU WWN Device Id: 0 000000 000000000 Firmware Version: 1.2 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Tue Nov 29 15:27:58 2011 NOVT SMART support is: Available - device has SMART capability. SMART support is: Enabled

[...]

SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 092 092 050 Pre-fail Always - 64660988943 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 21457656611972

12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 12

171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 7 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 4 181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (0 127 0 129 0) 195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 64660988943 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 64660988943 204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 64660988943 230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 429496729700 231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 5532 234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 10543 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 10543 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 28955