Custom Query (1368 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (154 - 156 of 1368)

Ticket Resolution Summary Owner Reporter
#163 duplicate Error happened when run smartctl -a /dev/sdb command somebody smartman123
Description
  1. Connect one SATA disk to LSI SAS to SATA bridge.
  2. Run command smartctl -a /dev/sdb.
  3. Error happened as below,

START OF READ SMART DATA SECTION

Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are:

ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=....

SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check.

#164 wontfix Attribute table: re-arrange columns placing TYPE after NAME help to clarify meaning somebody dg12
Description

The most misunderstood part of the attributes is "pre-fail" and "Old_age". They are the TYPE of attribute not the current condition.

I suggest that placing the TYPE column immediately after the attribute name would help this.

Currently the report is:


ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 2156


I suggest the arrangement should be


ID# ATTRIBUTE_NAME TYPE FLAG VALUE WORST THRESH UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate Pre-fail 0x000b 100 100 062 Always - 0

4 Start_Stop_Count Old_age 0x0012 099 099 000 Always - 2156

Thank you all for your work on this great tool.

#165 fixed Cannot re-enable SMART on 3ware controller under Windows Christian Franke alex-sh
Description

Hello,

I encountered this error when testing 3ware support under Windows (XP 32 bit and win7 64bit).

Suppose the drive behind the controller is /dev/sdd,2. Running "smartctl -s on (or off) on /dev/sdd,2" works. However, running "smartctl -s off /dev/sdd" says "Disable failed: Input/output error". After this, the SMART data is accessible neither on "/dev/sdd,2", nor "/dev/sdd". Trying to re-enable it says "Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)". The 3ware web interface also says that it cannot access SMART data on the drive. Only a reboot seems to help.

smartmontools: smartmontools-5.41-0-20110204-r3253.win32-setup.exe. Windows: observed under winxp (32-bit) and win7 (64-bit). Controller: 3ware 9690SA-4I4E, 1 drive attached to port 2.

This is the full log of my commands under winxp:

C:\>smartctl --scan-open
/dev/sda -d ata [ATA] (opened)
/dev/sdb -d ata [ATA] (opened)
/dev/sdc -d ata [ATA] (opened)
/dev/sdd,2 -d ata [ATA] (opened)

C:\>smartctl -s off /dev/sdd,2
smartctl 5.41 2011-02-04 r3253 [i686-w64-mingw32-xp-sp3] (cf-win32-20110204)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Disabled. Use option -s with argument 'on' to enable it.

C:\>smartctl -s on /dev/sdd,2
smartctl 5.41 2011-02-04 r3253 [i686-w64-mingw32-xp-sp3] (cf-win32-20110204)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.


C:\>smartctl -s off /dev/sdd,2
smartctl 5.41 2011-02-04 r3253 [i686-w64-mingw32-xp-sp3] (cf-win32-20110204)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Disabled. Use option -s with argument 'on' to enable it.

C:\>smartctl -s off /dev/sdd
smartctl 5.41 2011-02-04 r3253 [i686-w64-mingw32-xp-sp3] (cf-win32-20110204)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
Error SMART Disable failed: Input/output error
Smartctl: SMART Disable Failed.

A mandatory SMART command failed: exiting. To continue, add one or more '-T perm
issive' options.

C:\>smartctl -s on /dev/sdd,2
smartctl 5.41 2011-02-04 r3253 [i686-w64-mingw32-xp-sp3] (cf-win32-20110204)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)

A mandatory SMART command failed: exiting. To continue, add one or more '-T perm
issive' options.

C:\>smartctl -i /dev/sdd
smartctl 5.41 2011-02-04 r3253 [i686-w64-mingw32-xp-sp3] (cf-win32-20110204)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)

A mandatory SMART command failed: exiting. To continue, add one or more '-T perm
issive' options.

C:\>smartctl -i /dev/sdd,2
smartctl 5.41 2011-02-04 r3253 [i686-w64-mingw32-xp-sp3] (cf-win32-20110204)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)

A mandatory SMART command failed: exiting. To continue, add one or more '-T perm
issive' options.

Thanks, Alexander

Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.