Custom Query (1357 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (13 - 15 of 1357)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Ticket Resolution Summary Owner Reporter
#13 fixed Autodetection doesn't work with -d sat Christian Franke Giuseppe Iuculano
Description

Hi,

with:

DEVICESCAN -d sat -n standby -m root -M exec /usr/share/smartmontools/smartd-runner -M test

I got:

# smartd -d smartd 5.39 2009-08-29 r2879 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

Opened configuration file /etc/smartd.conf Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /etc/smartd.conf Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices In the system's table of devices NO devices found to scan Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...

But with: DEVICESCAN -n standby -m root -M exec /usr/share/smartmontools/smartd-runner -M test

autodetection works:

# smartd -d smartd 5.39 2009-08-29 r2879 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

Opened configuration file /etc/smartd.conf Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /etc/smartd.conf Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices Device: /dev/hda, opened Device: /dev/hda, packet devices [this device CD/DVD] not SMART capable Unable to register ATA device /dev/hda at line 23 of file /etc/smartd.conf Device: /dev/hdc, opened Device: /dev/hdc, packet devices [this device CD/DVD] not SMART capable Unable to register ATA device /dev/hdc at line 23 of file /etc/smartd.conf Device: /dev/sda, type changed from 'scsi' to 'sat' Device: /dev/sda [SAT], opened Device: /dev/sda [SAT], found in smartd database. Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list. Device: /dev/sdb, type changed from 'scsi' to 'sat' Device: /dev/sdb [SAT], opened Device: /dev/sdb [SAT], found in smartd database. Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list. Monitoring 2 ATA and 0 SCSI devices

Original bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=546566

#14 wontfix ``Usage Attribute: 194 Temperature_Celsius'' is confusing to parse somebody bkorb
Description

There's probably too much history now, but now I'll be able to say, "I tried and it was rejected." Folks around my work place don't like the transcribed message because they think this means "381 deg. F." If there were a way to tell smartd to print, say:

Usage Attribute 194 (Temperature_Celsius): changed from....

instead, then my internal clients would have a more difficult time misunderstanding the meaning. Maybe the:

--rephrase-attribute

option?

#15 fixed -d megaraid with SATA drives requires -T permissive to work somebody Alex Samorukov
Description

I have 2 DELL PERC 6/i controllers on different servers. Only difference is that first is connected to SATA drives and second - to SAS. While there is no problems at all with SAS drive, SATA is not working w/o -T permissive:

Output from controller with SAS drives:

smartctl 5.39 2009-09-22 r2922M [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

Creating /dev/megaraid_sas_ioctl_node = 17 Got MegaRAID inquiry.. FUJITSU MAX3073RC D206 Device: FUJITSU MAX3073RC Version: D206 Serial number: DQA3P6700JF9 Device type: disk Transport protocol: SAS Local Time is: Wed Sep 23 17:29:54 2009 EDT Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK

Current Drive Temperature: 29 C [SKIP]

Output from controller with SATA drives: [root@var-dev smartmontools]# ./smartctl /dev/sda -d megaraid,0 -i -a smartctl 5.39 2009-09-22 r2922 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

Creating /dev/megaraid_sas_ioctl_node = 17 Got MegaRAID inquiry.. ATA WDC WD5000AACS-01B01 /dev/sda [megaraid_disk_00] [SAT]: Device open changed type from 'megaraid' to 'sat'

START OF INFORMATION SECTION

Model Family: Western Digital Caviar Green family Device Model: WDC WD5000AACS-00ZUB0 Serial Number: WD-WCASU7381205 Firmware Version: 01.01B01 User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Sep 23 14:31:46 2009 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled

Rejecting SMART/ATA command to controller Rejecting SMART/ATA command to controller Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

Trying -T permissive, and, bingo, it works!

smartctl 5.39 2009-09-22 r2922 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

Creating /dev/megaraid_sas_ioctl_node = 17 Got MegaRAID inquiry.. ATA WDC WD5000AACS-01B01 /dev/sda [megaraid_disk_00] [SAT]: Device open changed type from 'megaraid' to 'sat'

START OF INFORMATION SECTION

Model Family: Western Digital Caviar Green family Device Model: WDC WD5000AACS-00ZUB0 Serial Number: WD-WCASU7381205 Firmware Version: 01.01B01 User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Sep 23 14:32:31 2009 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled

Rejecting SMART/ATA command to controller Rejecting SMART/ATA command to controller Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values: Offline data collection status: (0x84) Offline data collection activity

was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever been run.

[SKIP]

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.