Custom Query (1357 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (130 - 132 of 1357)

Ticket Resolution Summary Owner Reporter
#139 wontfix smartctl can not modify CCTL ( TLER equivalent) on Hitachi UltraStar on LSI 1068 SAS controller. somebody maurice780
Description

Using Hitachi 1TB UltraStar disks, HUA722010CLA330 On LSI1068 embedded SAS chip (on motherboard) OS: CentOS 5.1 on ROCKS5 cluster. Updated mptsas driver to mptlinux-4.24.00.00-2.x86_64 smartmontools 5.40 kernel 2.6.18-194.11.3.el5

Trying to read/modify CCTL settings. Fails to communicate with the drives CCTL. CAN see drives. Examples: smartctl -l scterc /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) Probable ATA device behind a SAT layer Try an additional '-d ata' or '-d sat' argument.

[root@lagavulin ~]# smartctl -d sat -T permissive -l scterc /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) Smartctl: Device Read Identity Failed (not an ATA/ATAPI device) Warning: device does not support SCT Commands

A couple more tests show that it thinks it's a scsi device, and then '-l scterc' returns nothing. This is true for both Hitachi and Seagate drives.

[root@lagavulin ~]# smartctl -d test /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) /dev/sda: Device of type 'scsi' [SCSI] detected /dev/sda: Device of type 'scsi' [SCSI] opened [root@lagavulin ~]# smartctl -a -d scsi /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) Serial number: JPW9J0HD0DD0TC Device type: disk Local Time is: Wed Dec 1 13:25:04 2010 EST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Error Counter logging not supported Device does not support Self Test logging

[root@lagavulin ~]# smartctl -a -d scsi /dev/sdb smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) Serial number: 3QJ01G92 Device type: disk Local Time is: Wed Dec 1 13:37:03 2010 EST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Error Counter logging not supported Device does not support Self Test logging

[root@lagavulin ~]# smartctl -d scsi -l scterc /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build)

Verifying current versions and earlier problems with lockups on the mptsas device we tried this test: # while true; do smartctl -a /dev/sdb > /dev/null; done

This produced no errors or lockups.

Is there SOME WAY to set CCTL on these drives??

#140 wontfix INQUIRY failed on LSI MegaRaid adapter somebody sparkyodom2005
Description

lspci | grep RAID 08:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)

smartctl -V

smartctl 5.40 2010-10-16 r3189 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

smartctl comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under the terms of the GNU General Public License Version 2. See http://www.gnu.org for further details.

smartmontools release 5.40 dated 2010-10-16 at 16:34:38 UTC smartmontools SVN rev 3189 dated 2010-10-16 at 16:35:49 smartmontools build host: x86_64-unknown-linux-gnu smartmontools build configured: 2010-12-30 18:16:48 UTC smartctl compile dated Dec 30 2010 at 10:17:15 smartmontools configure arguments: [no arguments given]

smartctl -a -d megaraid,1 /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

Smartctl open device: /dev/sda [megaraid_disk_01] failed: INQUIRY failed

#141 fixed os_freebsd.cpp: correct location for usb headers on DragonFly BSD Christian Franke rumko
Description

On DragonFly BSD usb headers are not located in dev/usb/ but bus/usb/ the attached patch fixes that and enables smartmontools to compile successfully.

Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.