Custom Query (1566 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (535 - 537 of 1566)

Ticket Resolution Summary Owner Reporter
#780 fixed smartmontools triggers kernel panic on INVARIANTS enabled FreeBSD kernel after r308351 in base op_hardenedbsd
Description

Details from ports patch - ​https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=215356

smartmontools: fix panic on INVARIANTS enabled kernel after r308351 in base

After r308351 commit the INVARIANTS enabled kernel gets too "eager" when checking the cam ccb flags. But the real problem was not the previous, but the smartmontools does not zeroed out the ccb on stack, and pass this dirty ccb to kernel, which is catched by an ASSERT. So fix this by filling up with 0 this ccb. This commit is similar, what's happen in r307684 in camcontrol. So this is the same followup patch in smartmontools.

​https://svnweb.freebsd.org/base?view=revision&revision=307684 ​https://svnweb.freebsd.org/base?view=revision&revision=308351

Sponsored-by: opBSD

op@opn ~> smartctl --version smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.0-STABLE-HBSD amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

smartctl comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under the terms of the GNU General Public License; either version 2, or (at your option) any later version. See ​http://www.gnu.org for further details.

smartmontools release 6.5 dated 2016-05-07 at 11:17:46 UTC smartmontools SVN rev 4318 dated 2016-05-07 at 11:18:20 smartmontools build host: amd64-portbld-freebsd11.0 smartmontools build with: C++98, GCC 4.2.1 Compatible FreeBSD Clang 3.8.0 (tags/RELEASE_380/final 262564) smartmontools configure arguments: '--disable-dependency-tracking' '--enable-sample' '--with-nvme-devicescan=yes' '--with-initscriptdir=/usr/local/etc/rc.d' '--prefix=/usr/local' '--localstatedir=/var' '--mandir=/usr/local/man' '--disable-silent-rules' '--infodir=/usr/local/info/' '--build=amd64-portbld-freebsd11.0' 'build_alias=amd64-portbld-freebsd11.0' 'CXX=c++' 'CXXFLAGS=-O2 -pipe -pipe -DHARDENEDBSD -fstack-protector -fno-strict-aliasing -DHARDENEDBSD' 'LDFLAGS= -fstack-protector' 'LIBS=' 'CPPFLAGS=' 'CC=cc' 'CFLAGS=-O2 -pipe -pipe -DHARDENEDBSD -fstack-protector -fno-strict-aliasing'

#781 invalid smartctl for OCZ-AGILITY3 incorrectly reporting temperature of 128C Daniel
Description

When running smartctl in FreeNAS 10 on an OCZ-AGILITY3 drive, I get a Temperature_Celsius reading of 128. The other drives in my system (Western Digital Reds) report values between 25-27C.

[root@freenas] ~# smartctl -a /dev/ada4
smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     OCZ-AGILITY3
Serial Number:    OCZ-XXXXXXXXXXXXXXXX
LU WWN Device Id: 5 e83a97 f1fb643ef
Firmware Version: 2.15
User Capacity:    60,022,480,896 bytes [60.0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Dec 15 17:11:44 2016 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                ( 2097) seconds.
Offline data collection
capabilities:                    (0x7f) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Abort Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  48) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x0021) SCT Status supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   088   088   050    Pre-fail  Always       -       0/40025267
  5 Retired_Block_Count     0x0033   100   100   003    Pre-fail  Always       -       0
  9 Power_On_Hours_and_Msec 0x0032   098   098   000    Old_age   Always       -       2522h+33m+58.310s
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       640
171 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       15
177 Wear_Range_Delta        0x0000   000   000   000    Old_age   Offline      -       3
181 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
182 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   128   129   000    Old_age   Always       -       128 (0 127 0 129 0)
195 ECC_Uncorr_Error_Count  0x001c   120   120   000    Old_age   Offline      -       0/40025267
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       0
201 Unc_Soft_Read_Err_Rate  0x001c   120   120   000    Old_age   Offline      -       0/40025267
204 Soft_ECC_Correct_Rate   0x001c   120   120   000    Old_age   Offline      -       0/40025267
230 Life_Curve_Status       0x0013   100   100   000    Pre-fail  Always       -       100
231 SSD_Life_Left           0x0013   100   100   010    Pre-fail  Always       -       0
233 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       2000
234 SandForce_Internal      0x0032   000   000   000    Old_age   Always       -       2733
241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       2733
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       4477

SMART Error Log not supported

SMART Self-test Log not supported

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

I can include an actual Serial Number if that's necessary. If you care to view the ticket I originally filed with FreeNAS 10, it's included ​here.

#782 fixed Support sg_io_v4 on /dev/bsg/* Alex Samorukov Alexander K Austin
Description

This enables usage on /dev/bsg/* devices. It has been trivially tested on my machine.

Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.