Custom Query (1494 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:

Results (424 - 426 of 1494)

← 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 →
Ticket Resolution Summary Owner Reporter
#661 fixed Drive not in database: Samsung SSD PM863 xciv
Description 
# grep \$Id /usr/share/smartmontools/drivedb.h
  { "$Id: drivedb.h 4220 2016-02-02 21:46:59Z samm2 $",


smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-573.18.1.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG MZ7LM960HCHP-0E003
Firmware Version: GXT3003Q
User Capacity:    960,197,124,096 bytes [960 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4c
Local Time is:    Mon Feb 29 16:56:34 2016 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Disabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]

=== START OF READ SMART DATA SECTION ===
SMART STATUS RETURN: incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                ( 3600) seconds.
Offline data collection
capabilities:                    (0x53) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  60) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  9 Power_On_Hours          -O--CK   099   099   000    -    42
 12 Power_Cycle_Count       -O--CK   099   099   000    -    17
177 Wear_Leveling_Count     PO--C-   099   099   005    -    3
179 Used_Rsvd_Blk_Cnt_Tot   PO--C-   100   100   010    -    0
180 Unused_Rsvd_Blk_Cnt_Tot PO--C-   100   100   010    -    4948
181 Program_Fail_Cnt_Total  -O--CK   100   100   010    -    0
182 Erase_Fail_Count_Total  -O--CK   100   100   010    -    0
183 Runtime_Bad_Block       PO--C-   100   100   010    -    0
184 End-to-End_Error        PO--CK   100   100   097    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
190 Airflow_Temperature_Cel -O--CK   065   056   000    -    35
195 Hardware_ECC_Recovered  -O-RC-   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   100   100   000    -    0
202 Data_Address_Mark_Errs  PO--CK   100   100   010    -    0
235 Unknown_Attribute       -O--C-   099   099   000    -    11
241 Total_LBAs_Written      -O--CK   099   099   000    -    5993157475
242 Total_LBAs_Read         -O--CK   099   099   000    -    1256859
243 Unknown_Attribute       -O--CK   100   100   000    -    0
244 Unknown_Attribute       -O--CK   100   100   000    -    0
245 Unknown_Attribute       -O--CK   100   100   000    -    65535
246 Unknown_Attribute       -O--CK   100   100   000    -    65535
247 Unknown_Attribute       -O--CK   100   100   000    -    65535
251 Unknown_Attribute       -O--CK   100   100   000    -    7494655312
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
SMART Log at address 0x02 has    1 sectors [Comprehensive SMART error log]
GP    Log at address 0x03 has    1 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has    1 sectors [SMART self-test log]
GP    Log at address 0x07 has    1 sectors [Extended self-test log]
SMART Log at address 0x09 has    1 sectors [Selective self-test log]
GP    Log at address 0x10 has    1 sectors [NCQ Command Error log]
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP    Log at address 0x13 has    1 sectors [SATA NCQ Send and Receive log]
GP/S  Log at address 0x30 has    9 sectors [IDENTIFY DEVICE data log]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        42         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
  255        0    65535  Read_scanning was completed without error
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Error unknown SCT Temperature History Format Version (3), should be 2.
Error SMART WRITE LOG does not return COUNT and LBA_LOW register
Warning: device does not support SCT (Get) Error Recovery Control command

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            3  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            3  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC
#662 fixed A-DATA USB bridge 125f:a15a - A-DATA HD710 Jan Hadrava
Description

A-DATA HD710 (AHD710-1TU3) does not work without -d sat. Please recognize the USB bridge automatically. 

# lsusb -d 125f:a15a
Bus 002 Device 004: ID 125f:a15a A-DATA Technology Co., Ltd. 
# ./smartctl -i /dev/sdb
smartctl 6.5 2016-02-29 r4227 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sdb: Unknown USB bridge [0x125f:0xa15a (0x100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

# ./smartctl -d sat -i /dev/sdb
smartctl 6.5 2016-02-29 r4227 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MQ01ABD...
Device Model:     TOSHIBA MQ01ABD100
Serial Number:    XXXXXXXXX
LU WWN Device Id: XXXXXXXXXXXXXXXXX
Firmware Version: AX1P1A
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Mar  1 20:10:25 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
#663 fixed Some of the Kingston SSD drives based on the phison chipset are wrongly added as Sandforce chipset Alex Samorukov
Description

It was found that at least some of the drives are built on the phison chipset, but using sandforce attributes. These are similar but not the same, see ​http://media.kingston.com/support/downloads/MKP_521_Phison_SMART_attribute.pdf (phison) and ​http://media.kingston.com/support/downloads/MKP_306_SMART_attribute.pdf (sandforce). We need to split them to the separate drivedb records instead. Need to check which controller belongs to each chipset. This is the list: 

bash-3.2$ grep \"KINGS drivedb.h
[?]    "KINGSTON SE50S3(100|240|480)G|" // tested with SE50S3100G/KE1ABBF0
[SF]    "KINGSTON SH10[03]S3(90|120|240|480)G|" // HyperX (3K), SF-2281, tested with
[SF]    "KINGSTON SKC(300S37A|380S3)(60|120|180|240|480)G|" // KC300, SF-2281, tested with
[SF]    "KINGSTON SVP200S3(7A)?(60|90|120|240|480)G|" // V+ 200, SF-2281, tested with
[SF]    "KINGSTON SMS200S3(30|60|120)G|" // mSATA, SF-2241, tested with SMS200S3120G/KC3ABBF0
[SF]    "KINGSTON SMS450S3(32|64|128)G|" // mSATA, SF-2281, tested with SMS450S3128G/503ABBF0
[SF]    "KINGSTON (SV300|SKC100|SE100)S3.*G|" // other SF-2281
[PH]    "KINGSTON SUV300S37A(120|240|480)G" // UV300 SSD, tested with KINGSTON SUV300S37A120G/SAFM11.K
[?]    "KINGSTON SSDNow 40GB",
[??]    "KINGSTON SSDNow 40GB",
[?]    "KINGSTON SNV425S2(64|128)GB|"  // SSDNow V Series (2. Generation, JMF618),
[?]    "KINGSTON SSDNOW 30GB|" // tested with KINGSTON SSDNOW 30GB/AJXA0202
[?]    "KINGSTON SS100S2(8|16)G|"  // SSDNow S100 Series, tested with KINGSTON SS100S28G/D100309a
[?]    "KINGSTON SNVP325S2(64|128|256|512)GB|" // SSDNow V+ Series, tested with KINGSTON SNVP325S2128GB/AGYA0201
    "KINGSTON SVP?100S2B?(64|96|128|256|512)G|"  // SSDNow V100/V+100 Series,
[?]    "KINGSTON SV200S3(64|128|256)G|" // SSDNow V200 Series, tested with KINGSTON SV200S3128G/E120506a
← 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 →
Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.