Custom Query (1415 matches)

This is part of the 'smartctl -x /dev/sdf' output for a brand new WD Red 4TB drive that passed several self-tests:

Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   253   051    -    0
  3 Spin_Up_Time            POS--K   100   253   021    -    0
  4 Start_Stop_Count        -O--CK   100   100   000    -    2
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    10
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    2
192 Power-Off_Retract_Count -O--CK   200   200   000    -    1
193 Load_Cycle_Count        -O--CK   200   200   000    -    2
194 Temperature_Celsius     -O---K   108   108   000    -    44
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

It has pre-fail flags on 3 attributes that have 0 (zero) as raw values.

Why are those attributes marked as pre-fail ? Is this a bug on smartmontools or I am interpreting this in a wrong way ? Or should I configure drivedb.h correctly for this drive? Any tip on where to find WD documentation for these values?

Thank you

Seagate Barracuda 7200.14 (AF) ST1000DM003-1CH162 CC47

There is no firmware upgrade available for this model - only for ST1000DM003-9YN162.

Hi all,

I have two systems, configured almost identically. Both have a 4 disk Intel RAID and a SSD for Windows. On the one machine I get the expected output:

C:\>smartctl --scan /dev/sda -d scsi # /dev/sda, SCSI device /dev/sdb -d scsi # /dev/sdb, SCSI device /dev/csmi0,0 -d ata # /dev/csmi0,0, ATA device /dev/csmi0,1 -d ata # /dev/csmi0,1, ATA device /dev/csmi0,2 -d ata # /dev/csmi0,2, ATA device /dev/csmi0,3 -d ata # /dev/csmi0,3, ATA device /dev/csmi0,4 -d ata # /dev/csmi0,4, ATA device

SATA port 0 is the SSD and ports 1 through 4 are the raid members. On the other machine, the raid disks are connected to SATA ports 2 through 5 (which is confirmed by the Intel utility). On this system I get the following:

C:\>smartctl --scan /dev/sda -d scsi # /dev/sda, SCSI device /dev/sdb -d scsi # /dev/sdb, SCSI device /dev/csmi0,0 -d ata # /dev/csmi0,0, ATA device /dev/csmi0,2 -d ata # /dev/csmi0,2, ATA device /dev/csmi0,3 -d ata # /dev/csmi0,3, ATA device /dev/csmi0,4 -d ata # /dev/csmi0,4, ATA device

Obviously one disk is missing, and I get the following, trying to access it directly:

C:\>smartctl -a /dev/csmi0,5 smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win7-sp1] (sf-6.2-1) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

Smartctl open device: /dev/csmi0,5 failed: Port 5 does not exist (#ports: 5)

My first guess would be that the empty port messes with the count of total ports. Any help would be appreciated, and any info I can provide to help, just ask.

Thanks!