| 1 | smartctl 6.6 2017-11-05 r4594 [Darwin 17.3.0 x86_64] (local build)
|
|---|
| 2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: PLEXTOR PX-512M7VC
|
|---|
| 6 | Serial Number: P02736107105
|
|---|
| 7 | LU WWN Device Id: 5 002303 100f93b55
|
|---|
| 8 | Add. Product Id: TC9020D0
|
|---|
| 9 | Firmware Version: 1.05
|
|---|
| 10 | User Capacity: 512,110,190,592 bytes [512 GB]
|
|---|
| 11 | Sector Size: 512 bytes logical/physical
|
|---|
| 12 | Rotation Rate: Solid State Device
|
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 14 | ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
|
|---|
| 15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 16 | Local Time is: Sun Jan 21 10:09:56 2018 CST
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 | AAM feature is: Unavailable
|
|---|
| 20 | APM feature is: Unavailable
|
|---|
| 21 | Rd look-ahead is: Enabled
|
|---|
| 22 | Write cache is: Enabled
|
|---|
| 23 | DSN feature is: Unavailable
|
|---|
| 24 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 25 | Wt Cache Reorder: Unknown
|
|---|
| 26 |
|
|---|
| 27 | === START OF READ SMART DATA SECTION ===
|
|---|
| 28 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 29 |
|
|---|
| 30 | General SMART Values:
|
|---|
| 31 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 32 | was never started.
|
|---|
| 33 | Auto Offline Data Collection: Disabled.
|
|---|
| 34 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 35 | without error or no self-test has ever
|
|---|
| 36 | been run.
|
|---|
| 37 | Total time to complete Offline
|
|---|
| 38 | data collection: ( 10) seconds.
|
|---|
| 39 | Offline data collection
|
|---|
| 40 | capabilities: (0x15) SMART execute Offline immediate.
|
|---|
| 41 | No Auto Offline data collection support.
|
|---|
| 42 | Abort Offline collection upon new
|
|---|
| 43 | command.
|
|---|
| 44 | No Offline surface scan supported.
|
|---|
| 45 | Self-test supported.
|
|---|
| 46 | No Conveyance Self-test supported.
|
|---|
| 47 | No Selective Self-test supported.
|
|---|
| 48 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 49 | power-saving mode.
|
|---|
| 50 | Supports SMART auto save timer.
|
|---|
| 51 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 52 | General Purpose Logging supported.
|
|---|
| 53 | Short self-test routine
|
|---|
| 54 | recommended polling time: ( 2) minutes.
|
|---|
| 55 | Extended self-test routine
|
|---|
| 56 | recommended polling time: ( 44) minutes.
|
|---|
| 57 | SCT capabilities: (0x001d) SCT Status supported.
|
|---|
| 58 | SCT Error Recovery Control supported.
|
|---|
| 59 | SCT Feature Control supported.
|
|---|
| 60 |
|
|---|
| 61 | SMART Attributes Data Structure revision number: 1
|
|---|
| 62 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 63 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 64 | 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0
|
|---|
| 65 | 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0
|
|---|
| 66 | 9 Power_On_Hours -O---- 100 100 000 - 1126
|
|---|
| 67 | 12 Power_Cycle_Count PO---- 100 100 000 - 828
|
|---|
| 68 | 170 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 69 | 171 Unknown_Attribute PO---- 100 100 000 - 0
|
|---|
| 70 | 172 Unknown_Attribute PO---- 100 100 000 - 0
|
|---|
| 71 | 173 Unknown_Attribute PO---- 100 100 000 - 2
|
|---|
| 72 | 174 Unknown_Attribute PO---- 100 100 000 - 725
|
|---|
| 73 | 175 Program_Fail_Count_Chip PO---- 100 100 000 - 0
|
|---|
| 74 | 176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0
|
|---|
| 75 | 177 Wear_Leveling_Count PO---- 100 100 000 - 3628
|
|---|
| 76 | 178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0
|
|---|
| 77 | 179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 0
|
|---|
| 78 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 2400
|
|---|
| 79 | 181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0
|
|---|
| 80 | 182 Erase_Fail_Count_Total PO---- 100 100 000 - 0
|
|---|
| 81 | 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
|---|
| 82 | 184 End-to-End_Error PO--CK 100 100 000 - 0
|
|---|
| 83 | 187 Reported_Uncorrect PO---- 100 100 000 - 0
|
|---|
| 84 | 188 Command_Timeout -O--CK 100 100 000 - 0
|
|---|
| 85 | 192 Power-Off_Retract_Count PO---- 100 100 000 - 725
|
|---|
| 86 | 195 Hardware_ECC_Recovered PO---- 100 100 000 - 0
|
|---|
| 87 | 196 Reallocated_Event_Count PO---- 100 100 000 - 0
|
|---|
| 88 | 198 Offline_Uncorrectable PO---- 100 100 000 - 0
|
|---|
| 89 | 199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0
|
|---|
| 90 | 232 Available_Reservd_Space PO---- 100 100 010 - 0
|
|---|
| 91 | 233 Media_Wearout_Indicator PO---- 100 100 000 - 1360
|
|---|
| 92 | 241 Total_LBAs_Written PO---- 100 100 000 - 1317
|
|---|
| 93 | 242 Total_LBAs_Read PO---- 100 100 000 - 2180
|
|---|
| 94 | ||||||_ K auto-keep
|
|---|
| 95 | |||||__ C event count
|
|---|
| 96 | ||||___ R error rate
|
|---|
| 97 | |||____ S speed/performance
|
|---|
| 98 | ||_____ O updated online
|
|---|
| 99 | |______ P prefailure warning
|
|---|
| 100 |
|
|---|
| 101 | ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented
|
|---|
| 102 | Read GP Log Directory failed
|
|---|
| 103 |
|
|---|
| 104 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 105 | Address Access R/W Size Description
|
|---|
| 106 | 0x00 SL R/O 1 Log Directory
|
|---|
| 107 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 108 | 0x02 SL R/O 2 Comprehensive SMART error log
|
|---|
| 109 | 0x03 SL R/O 1 Ext. Comprehensive SMART error log
|
|---|
| 110 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 111 | 0x07 SL R/O 1 Extended self-test log
|
|---|
| 112 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 113 | 0x10 SL R/O 1 NCQ Command Error log
|
|---|
| 114 | 0x11 SL R/O 1 SATA Phy Event Counters log
|
|---|
| 115 | 0x30 SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 116 | 0x80-0x9f SL R/W 16 Host vendor specific log
|
|---|
| 117 | 0xe0 SL R/W 1 SCT Command/Status
|
|---|
| 118 | 0xe1 SL R/W 1 SCT Data Transfer
|
|---|
| 119 |
|
|---|
| 120 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|---|
| 121 |
|
|---|
| 122 | SMART Error Log Version: 0
|
|---|
| 123 | No Errors Logged
|
|---|
| 124 |
|
|---|
| 125 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
|---|
| 126 |
|
|---|
| 127 | SMART Self-test log structure revision number 1
|
|---|
| 128 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 129 | # 1 Short offline Completed without error 00% 1126 -
|
|---|
| 130 |
|
|---|
| 131 | Selective Self-tests/Logging not supported
|
|---|
| 132 |
|
|---|
| 133 | SCT Status Version: 3
|
|---|
| 134 | SCT Version (vendor specific): 1 (0x0001)
|
|---|
| 135 | SCT Support Level: 1
|
|---|
| 136 | Device State: Active (0)
|
|---|
| 137 | Current Temperature: 37 Celsius
|
|---|
| 138 | Power Cycle Min/Max Temperature: ?/ ? Celsius
|
|---|
| 139 | Lifetime Min/Max Temperature: ?/ ? Celsius
|
|---|
| 140 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 141 |
|
|---|
| 142 | SCT Data Table command not supported
|
|---|
| 143 |
|
|---|
| 144 | SMART WRITE LOG does not return COUNT and LBA_LOW register
|
|---|
| 145 | SCT (Get) Error Recovery Control command failed
|
|---|
| 146 |
|
|---|
| 147 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 148 |
|
|---|
| 149 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 150 |
|
|---|
| 151 | ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented
|
|---|
| 152 | Read SATA Phy Event Counters failed
|
|---|
| 153 |
|
|---|
