| 1 | |
|---|
| 2 | === START OF INFORMATION SECTION === |
|---|
| 3 | Device Model: SSD Smartbuy 240GB |
|---|
| 4 | Serial Number: A444078C083100056845 |
|---|
| 5 | LU WWN Device Id: 0 000000 000000000 |
|---|
| 6 | Firmware Version: SBFM91.1 |
|---|
| 7 | User Capacity: 240 057 409 536 bytes [240 GB] |
|---|
| 8 | Sector Size: 512 bytes logical/physical |
|---|
| 9 | Rotation Rate: Solid State Device |
|---|
| 10 | Form Factor: 2.5 inches |
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall] |
|---|
| 12 | ATA Version is: ACS-4 (minor revision not indicated) |
|---|
| 13 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) |
|---|
| 14 | Local Time is: Fri Feb 9 20:23:38 2018 EDT |
|---|
| 15 | SMART support is: Available - device has SMART capability. |
|---|
| 16 | SMART support is: Enabled |
|---|
| 17 | AAM feature is: Unavailable |
|---|
| 18 | APM feature is: Unavailable |
|---|
| 19 | Rd look-ahead is: Enabled |
|---|
| 20 | Write cache is: Enabled |
|---|
| 21 | DSN feature is: Unavailable |
|---|
| 22 | ATA Security is: Disabled, frozen [SEC2] |
|---|
| 23 | Wt Cache Reorder: Unavailable |
|---|
| 24 | |
|---|
| 25 | === START OF READ SMART DATA SECTION === |
|---|
| 26 | SMART overall-health self-assessment test result: PASSED |
|---|
| 27 | |
|---|
| 28 | General SMART Values: |
|---|
| 29 | Offline data collection status: (0x00) Offline data collection activity |
|---|
| 30 | was never started. |
|---|
| 31 | Auto Offline Data Collection: Disabled. |
|---|
| 32 | Self-test execution status: ( 0) The previous self-test routine completed |
|---|
| 33 | without error or no self-test has ever |
|---|
| 34 | been run. |
|---|
| 35 | Total time to complete Offline |
|---|
| 36 | data collection: (65535) seconds. |
|---|
| 37 | Offline data collection |
|---|
| 38 | capabilities: (0x79) SMART execute Offline immediate. |
|---|
| 39 | No Auto Offline data collection support. |
|---|
| 40 | Suspend Offline collection upon new |
|---|
| 41 | command. |
|---|
| 42 | Offline surface scan supported. |
|---|
| 43 | Self-test supported. |
|---|
| 44 | Conveyance Self-test supported. |
|---|
| 45 | Selective Self-test supported. |
|---|
| 46 | SMART capabilities: (0x0003) Saves SMART data before entering |
|---|
| 47 | power-saving mode. |
|---|
| 48 | Supports SMART auto save timer. |
|---|
| 49 | Error logging capability: (0x01) Error logging supported. |
|---|
| 50 | General Purpose Logging supported. |
|---|
| 51 | Short self-test routine |
|---|
| 52 | recommended polling time: ( 2) minutes. |
|---|
| 53 | Extended self-test routine |
|---|
| 54 | recommended polling time: ( 30) minutes. |
|---|
| 55 | Conveyance self-test routine |
|---|
| 56 | recommended polling time: ( 6) minutes. |
|---|
| 57 | |
|---|
| 58 | SMART Attributes Data Structure revision number: 16 |
|---|
| 59 | Vendor Specific SMART Attributes with Thresholds: |
|---|
| 60 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
|---|
| 61 | 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 |
|---|
| 62 | 9 Power_On_Hours -O--C- 100 100 000 - 106 |
|---|
| 63 | 12 Power_Cycle_Count -O--C- 100 100 000 - 28 |
|---|
| 64 | 168 Unknown_Attribute -O--C- 100 100 000 - 0 |
|---|
| 65 | 170 Unknown_Attribute PO---- 081 081 000 - 406 |
|---|
| 66 | 173 Unknown_Attribute -O--C- 100 100 000 - 3 |
|---|
| 67 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 19 |
|---|
| 68 | 194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) |
|---|
| 69 | 218 Unknown_Attribute PO-R-- 100 100 050 - 0 |
|---|
| 70 | 231 Temperature_Celsius PO--C- 100 100 000 - 100 |
|---|
| 71 | 241 Total_LBAs_Written -O--C- 100 100 000 - 120 |
|---|
| 72 | ||||||_ K auto-keep |
|---|
| 73 | |||||__ C event count |
|---|
| 74 | ||||___ R error rate |
|---|
| 75 | |||____ S speed/performance |
|---|
| 76 | ||_____ O updated online |
|---|
| 77 | |______ P prefailure warning |
|---|
| 78 | |
|---|
| 79 | General Purpose Log Directory Version 1 |
|---|
| 80 | SMART Log Directory Version 1 [multi-sector log support] |
|---|
| 81 | Address Access R/W Size Description |
|---|
| 82 | 0x00 GPL,SL R/O 1 Log Directory |
|---|
| 83 | 0x01 SL R/O 1 Summary SMART error log |
|---|
| 84 | 0x02 SL R/O 51 Comprehensive SMART error log |
|---|
| 85 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log |
|---|
| 86 | 0x04 GPL,SL R/O 8 Device Statistics log |
|---|
| 87 | 0x06 SL R/O 1 SMART self-test log |
|---|
| 88 | 0x07 GPL R/O 1 Extended self-test log |
|---|
| 89 | 0x09 SL R/W 1 Selective self-test log |
|---|
| 90 | 0x10 GPL R/O 1 NCQ Command Error log |
|---|
| 91 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
|---|
| 92 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
|---|
| 93 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
|---|
| 94 | |
|---|
| 95 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors) |
|---|
| 96 | No Errors Logged |
|---|
| 97 | |
|---|
| 98 | SMART Extended Self-test Log Version: 1 (1 sectors) |
|---|
| 99 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
|---|
| 100 | |
|---|
| 101 | SMART Selective self-test log data structure revision number 0 |
|---|
| 102 | Note: revision number not 1 implies that no selective self-test has ever been run |
|---|
| 103 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
|---|
| 104 | 1 0 0 Not_testing |
|---|
| 105 | 2 0 0 Not_testing |
|---|
| 106 | 3 0 0 Not_testing |
|---|
| 107 | 4 0 0 Not_testing |
|---|
| 108 | 5 0 0 Not_testing |
|---|
| 109 | Selective self-test flags (0x0): |
|---|
| 110 | After scanning selected spans, do NOT read-scan remainder of disk. |
|---|
| 111 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
|---|
| 112 | |
|---|
| 113 | SCT Commands not supported |
|---|
| 114 | |
|---|
| 115 | Device Statistics (GP Log 0x04) |
|---|
| 116 | Page Offset Size Value Flags Description |
|---|
| 117 | 0x01 ===== = = === == General Statistics (rev 1) == |
|---|
| 118 | 0x01 0x008 4 28 --- Lifetime Power-On Resets |
|---|
| 119 | 0x01 0x010 4 106 --- Power-on Hours |
|---|
| 120 | 0x01 0x018 6 253105098 --- Logical Sectors Written |
|---|
| 121 | 0x01 0x028 6 141576038 --- Logical Sectors Read |
|---|
| 122 | 0x04 ===== = = === == General Errors Statistics (rev 1) == |
|---|
| 123 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors |
|---|
| 124 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
|---|
| 125 | 0x05 0x008 1 33 --- Current Temperature |
|---|
| 126 | 0x05 0x020 1 33 --- Highest Temperature |
|---|
| 127 | 0x05 0x028 1 33 --- Lowest Temperature |
|---|
| 128 | 0x06 ===== = = === == Transport Statistics (rev 1) == |
|---|
| 129 | 0x06 0x018 4 0 --- Number of Interface CRC Errors |
|---|
| 130 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
|---|
| 131 | 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |
|---|
| 132 | |||_ C monitored condition met |
|---|
| 133 | ||__ D supports DSN |
|---|
| 134 | |___ N normalized value |
|---|
| 135 | |
|---|
| 136 | Pending Defects log (GP Log 0x0c) not supported |
|---|
| 137 | |
|---|
| 138 | SATA Phy Event Counters (GP Log 0x11) |
|---|
| 139 | ID Size Value Description |
|---|
| 140 | 0x0001 2 0 Command failed due to ICRC error |
|---|
| 141 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
|---|
| 142 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
|---|
| 143 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
|---|
| 144 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
|---|
| 145 | 0x0008 2 0 Device-to-host non-data FIS retries |
|---|
| 146 | 0x0009 4 19 Transition from drive PhyRdy to drive PhyNRdy |
|---|
| 147 | 0x000a 4 20 Device-to-host register FISes sent due to a COMRESET |
|---|
| 148 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
|---|
| 149 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
|---|
| 150 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
|---|
| 151 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
|---|
| 152 | |
|---|
