| 1 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build) |
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 3 | |
|---|
| 4 | === START OF INFORMATION SECTION === |
|---|
| 5 | Model Family: Hitachi/HGST Travelstar Z5K500 |
|---|
| 6 | Device Model: HGST HTS545050A7E680 |
|---|
| 7 | Serial Number: RBE50K1L01KNRH |
|---|
| 8 | LU WWN Device Id: 5 000cca 8a4c0b6b2 |
|---|
| 9 | Firmware Version: GR2OA3N0 |
|---|
| 10 | User Capacity: 500,107,862,016 bytes [500 GB] |
|---|
| 11 | Sector Sizes: 512 bytes logical, 4096 bytes physical |
|---|
| 12 | Rotation Rate: 5400 rpm |
|---|
| 13 | Form Factor: 2.5 inches |
|---|
| 14 | Device is: In smartctl database [for details use: -P show] |
|---|
| 15 | ATA Version is: ATA8-ACS T13/1699-D revision 6 |
|---|
| 16 | SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) |
|---|
| 17 | Local Time is: Wed Jan 10 16:01:37 2018 IST |
|---|
| 18 | SMART support is: Available - device has SMART capability. |
|---|
| 19 | SMART support is: Enabled |
|---|
| 20 | AAM feature is: Unavailable |
|---|
| 21 | APM level is: 254 (maximum performance) |
|---|
| 22 | Rd look-ahead is: Enabled |
|---|
| 23 | Write cache is: Enabled |
|---|
| 24 | ATA Security is: Disabled, frozen [SEC2] |
|---|
| 25 | Wt Cache Reorder: Enabled |
|---|
| 26 | |
|---|
| 27 | === START OF READ SMART DATA SECTION === |
|---|
| 28 | SMART overall-health self-assessment test result: PASSED |
|---|
| 29 | |
|---|
| 30 | General SMART Values: |
|---|
| 31 | Offline data collection status: (0x00) Offline data collection activity |
|---|
| 32 | was never started. |
|---|
| 33 | Auto Offline Data Collection: Disabled. |
|---|
| 34 | Self-test execution status: ( 0) The previous self-test routine completed |
|---|
| 35 | without error or no self-test has ever |
|---|
| 36 | been run. |
|---|
| 37 | Total time to complete Offline |
|---|
| 38 | data collection: ( 45) seconds. |
|---|
| 39 | Offline data collection |
|---|
| 40 | capabilities: (0x5b) SMART execute Offline immediate. |
|---|
| 41 | Auto Offline data collection on/off support. |
|---|
| 42 | Suspend Offline collection upon new |
|---|
| 43 | command. |
|---|
| 44 | Offline surface scan supported. |
|---|
| 45 | Self-test supported. |
|---|
| 46 | No Conveyance Self-test supported. |
|---|
| 47 | Selective Self-test supported. |
|---|
| 48 | SMART capabilities: (0x0003) Saves SMART data before entering |
|---|
| 49 | power-saving mode. |
|---|
| 50 | Supports SMART auto save timer. |
|---|
| 51 | Error logging capability: (0x01) Error logging supported. |
|---|
| 52 | General Purpose Logging supported. |
|---|
| 53 | Short self-test routine |
|---|
| 54 | recommended polling time: ( 2) minutes. |
|---|
| 55 | Extended self-test routine |
|---|
| 56 | recommended polling time: ( 112) minutes. |
|---|
| 57 | SCT capabilities: (0x003d) SCT Status supported. |
|---|
| 58 | SCT Error Recovery Control supported. |
|---|
| 59 | SCT Feature Control supported. |
|---|
| 60 | SCT Data Table supported. |
|---|
| 61 | |
|---|
| 62 | SMART Attributes Data Structure revision number: 16 |
|---|
| 63 | Vendor Specific SMART Attributes with Thresholds: |
|---|
| 64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
|---|
| 65 | 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 |
|---|
| 66 | 2 Throughput_Performance P-S--- 100 100 040 - 0 |
|---|
| 67 | 3 Spin_Up_Time POS--- 230 230 033 - 1 |
|---|
| 68 | 4 Start_Stop_Count -O--C- 100 100 000 - 13 |
|---|
| 69 | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 |
|---|
| 70 | 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 |
|---|
| 71 | 8 Seek_Time_Performance P-S--- 100 100 040 - 0 |
|---|
| 72 | 9 Power_On_Hours -O--C- 100 100 000 - 8 |
|---|
| 73 | 10 Spin_Retry_Count PO--C- 100 100 060 - 0 |
|---|
| 74 | 12 Power_Cycle_Count -O--CK 100 100 000 - 11 |
|---|
| 75 | 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 |
|---|
| 76 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 65542 |
|---|
| 77 | 193 Load_Cycle_Count -O--C- 100 100 000 - 27 |
|---|
| 78 | 194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 19/47) |
|---|
| 79 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 |
|---|
| 80 | 197 Current_Pending_Sector -O---K 100 100 000 - 0 |
|---|
| 81 | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 |
|---|
| 82 | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 |
|---|
| 83 | 223 Load_Retry_Count -O-R-- 100 100 000 - 0 |
|---|
| 84 | ||||||_ K auto-keep |
|---|
| 85 | |||||__ C event count |
|---|
| 86 | ||||___ R error rate |
|---|
| 87 | |||____ S speed/performance |
|---|
| 88 | ||_____ O updated online |
|---|
| 89 | |______ P prefailure warning |
|---|
| 90 | |
|---|
| 91 | General Purpose Log Directory Version 1 |
|---|
| 92 | SMART Log Directory Version 1 [multi-sector log support] |
|---|
| 93 | Address Access R/W Size Description |
|---|
| 94 | 0x00 GPL,SL R/O 1 Log Directory |
|---|
| 95 | 0x01 SL R/O 1 Summary SMART error log |
|---|
| 96 | 0x02 SL R/O 1 Comprehensive SMART error log |
|---|
| 97 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log |
|---|
| 98 | 0x06 SL R/O 1 SMART self-test log |
|---|
| 99 | 0x07 GPL R/O 1 Extended self-test log |
|---|
| 100 | 0x09 SL R/W 1 Selective self-test log |
|---|
| 101 | 0x10 GPL R/O 1 SATA NCQ Queued Error log |
|---|
| 102 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
|---|
| 103 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
|---|
| 104 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
|---|
| 105 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
|---|
| 106 | |
|---|
| 107 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
|---|
| 108 | No Errors Logged |
|---|
| 109 | |
|---|
| 110 | SMART Extended Self-test Log Version: 1 (1 sectors) |
|---|
| 111 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
|---|
| 112 | |
|---|
| 113 | SMART Selective self-test log data structure revision number 1 |
|---|
| 114 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
|---|
| 115 | 1 0 0 Not_testing |
|---|
| 116 | 2 0 0 Not_testing |
|---|
| 117 | 3 0 0 Not_testing |
|---|
| 118 | 4 0 0 Not_testing |
|---|
| 119 | 5 0 0 Not_testing |
|---|
| 120 | Selective self-test flags (0x0): |
|---|
| 121 | After scanning selected spans, do NOT read-scan remainder of disk. |
|---|
| 122 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
|---|
| 123 | |
|---|
| 124 | SCT Status Version: 3 |
|---|
| 125 | SCT Version (vendor specific): 256 (0x0100) |
|---|
| 126 | SCT Support Level: 1 |
|---|
| 127 | Device State: Active (0) |
|---|
| 128 | Current Temperature: 24 Celsius |
|---|
| 129 | Power Cycle Min/Max Temperature: 22/24 Celsius |
|---|
| 130 | Lifetime Min/Max Temperature: 19/47 Celsius |
|---|
| 131 | Lifetime Average Temperature: 39 Celsius |
|---|
| 132 | Under/Over Temperature Limit Count: 0/0 |
|---|
| 133 | |
|---|
| 134 | SCT Temperature History Version: 2 |
|---|
| 135 | Temperature Sampling Period: 1 minute |
|---|
| 136 | Temperature Logging Interval: 1 minute |
|---|
| 137 | Min/Max recommended Temperature: 0/60 Celsius |
|---|
| 138 | Min/Max Temperature Limit: -40/65 Celsius |
|---|
| 139 | Temperature History Size (Index): 128 (102) |
|---|
| 140 | |
|---|
| 141 | Index Estimated Time Temperature Celsius |
|---|
| 142 | 103 2018-01-10 13:54 33 ************** |
|---|
| 143 | ... ..( 3 skipped). .. ************** |
|---|
| 144 | 107 2018-01-10 13:58 33 ************** |
|---|
| 145 | 108 2018-01-10 13:59 34 *************** |
|---|
| 146 | 109 2018-01-10 14:00 35 **************** |
|---|
| 147 | 110 2018-01-10 14:01 35 **************** |
|---|
| 148 | 111 2018-01-10 14:02 36 ***************** |
|---|
| 149 | 112 2018-01-10 14:03 37 ****************** |
|---|
| 150 | 113 2018-01-10 14:04 38 ******************* |
|---|
| 151 | 114 2018-01-10 14:05 39 ******************** |
|---|
| 152 | 115 2018-01-10 14:06 39 ******************** |
|---|
| 153 | 116 2018-01-10 14:07 39 ******************** |
|---|
| 154 | 117 2018-01-10 14:08 40 ********************* |
|---|
| 155 | 118 2018-01-10 14:09 40 ********************* |
|---|
| 156 | 119 2018-01-10 14:10 41 ********************** |
|---|
| 157 | 120 2018-01-10 14:11 42 *********************** |
|---|
| 158 | ... ..( 3 skipped). .. *********************** |
|---|
| 159 | 124 2018-01-10 14:15 42 *********************** |
|---|
| 160 | 125 2018-01-10 14:16 43 ************************ |
|---|
| 161 | ... ..( 3 skipped). .. ************************ |
|---|
| 162 | 1 2018-01-10 14:20 43 ************************ |
|---|
| 163 | 2 2018-01-10 14:21 44 ************************* |
|---|
| 164 | ... ..( 4 skipped). .. ************************* |
|---|
| 165 | 7 2018-01-10 14:26 44 ************************* |
|---|
| 166 | 8 2018-01-10 14:27 45 ************************** |
|---|
| 167 | 9 2018-01-10 14:28 44 ************************* |
|---|
| 168 | 10 2018-01-10 14:29 44 ************************* |
|---|
| 169 | 11 2018-01-10 14:30 45 ************************** |
|---|
| 170 | 12 2018-01-10 14:31 44 ************************* |
|---|
| 171 | 13 2018-01-10 14:32 44 ************************* |
|---|
| 172 | 14 2018-01-10 14:33 45 ************************** |
|---|
| 173 | 15 2018-01-10 14:34 44 ************************* |
|---|
| 174 | 16 2018-01-10 14:35 45 ************************** |
|---|
| 175 | 17 2018-01-10 14:36 44 ************************* |
|---|
| 176 | ... ..( 3 skipped). .. ************************* |
|---|
| 177 | 21 2018-01-10 14:40 44 ************************* |
|---|
| 178 | 22 2018-01-10 14:41 45 ************************** |
|---|
| 179 | 23 2018-01-10 14:42 44 ************************* |
|---|
| 180 | ... ..( 2 skipped). .. ************************* |
|---|
| 181 | 26 2018-01-10 14:45 44 ************************* |
|---|
| 182 | 27 2018-01-10 14:46 45 ************************** |
|---|
| 183 | 28 2018-01-10 14:47 44 ************************* |
|---|
| 184 | 29 2018-01-10 14:48 45 ************************** |
|---|
| 185 | ... ..( 3 skipped). .. ************************** |
|---|
| 186 | 33 2018-01-10 14:52 45 ************************** |
|---|
| 187 | 34 2018-01-10 14:53 44 ************************* |
|---|
| 188 | 35 2018-01-10 14:54 45 ************************** |
|---|
| 189 | 36 2018-01-10 14:55 44 ************************* |
|---|
| 190 | 37 2018-01-10 14:56 44 ************************* |
|---|
| 191 | 38 2018-01-10 14:57 44 ************************* |
|---|
| 192 | 39 2018-01-10 14:58 ? - |
|---|
| 193 | 40 2018-01-10 14:59 35 **************** |
|---|
| 194 | 41 2018-01-10 15:00 35 **************** |
|---|
| 195 | 42 2018-01-10 15:01 34 *************** |
|---|
| 196 | ... ..( 6 skipped). .. *************** |
|---|
| 197 | 49 2018-01-10 15:08 34 *************** |
|---|
| 198 | 50 2018-01-10 15:09 35 **************** |
|---|
| 199 | 51 2018-01-10 15:10 35 **************** |
|---|
| 200 | 52 2018-01-10 15:11 34 *************** |
|---|
| 201 | 53 2018-01-10 15:12 35 **************** |
|---|
| 202 | ... ..( 3 skipped). .. **************** |
|---|
| 203 | 57 2018-01-10 15:16 35 **************** |
|---|
| 204 | 58 2018-01-10 15:17 36 ***************** |
|---|
| 205 | ... ..( 37 skipped). .. ***************** |
|---|
| 206 | 96 2018-01-10 15:55 36 ***************** |
|---|
| 207 | 97 2018-01-10 15:56 ? - |
|---|
| 208 | 98 2018-01-10 15:57 31 ************ |
|---|
| 209 | 99 2018-01-10 15:58 31 ************ |
|---|
| 210 | 100 2018-01-10 15:59 31 ************ |
|---|
| 211 | 101 2018-01-10 16:00 ? - |
|---|
| 212 | 102 2018-01-10 16:01 23 **** |
|---|
| 213 | |
|---|
| 214 | SCT Error Recovery Control: |
|---|
| 215 | Read: Disabled |
|---|
| 216 | Write: Disabled |
|---|
| 217 | |
|---|
| 218 | Device Statistics (GP/SMART Log 0x04) not supported |
|---|
| 219 | |
|---|
| 220 | SATA Phy Event Counters (GP Log 0x11) |
|---|
| 221 | ID Size Value Description |
|---|
| 222 | 0x0001 2 0 Command failed due to ICRC error |
|---|
| 223 | 0x0002 2 0 R_ERR response for data FIS |
|---|
| 224 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
|---|
| 225 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
|---|
| 226 | 0x0005 2 0 R_ERR response for non-data FIS |
|---|
| 227 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
|---|
| 228 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
|---|
| 229 | 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy |
|---|
| 230 | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET |
|---|
| 231 | 0x000b 2 0 CRC errors within host-to-device FIS |
|---|
| 232 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
|---|
| 233 | |
|---|
