1 | # smartctl -x /dev/sdb |
---|
2 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build) |
---|
3 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
4 | |
---|
5 | /dev/sdb: Unknown USB bridge [0x1058:0x25e2 (0x4004)] |
---|
6 | Please specify device type with the -d option. |
---|
7 | |
---|
8 | Use smartctl -h to get a usage summary |
---|
9 | |
---|
10 | # smartctl -d sat -x /dev/sdb |
---|
11 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build) |
---|
12 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
13 | |
---|
14 | === START OF INFORMATION SECTION === |
---|
15 | Device Model: WDC WD40NMZW-11GX6S1 |
---|
16 | Serial Number: WD-WX21D47E8DAD |
---|
17 | LU WWN Device Id: 5 0014ee 6b2735659 |
---|
18 | Firmware Version: 01.01A01 |
---|
19 | User Capacity: 4,000,753,472,000 bytes [4.00 TB] |
---|
20 | Sector Sizes: 512 bytes logical, 4096 bytes physical |
---|
21 | Rotation Rate: 5400 rpm |
---|
22 | Form Factor: 2.5 inches |
---|
23 | Device is: Not in smartctl database [for details use: -P showall] |
---|
24 | ATA Version is: ACS-3 (minor revision not indicated) |
---|
25 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) |
---|
26 | Local Time is: Thu Dec 28 15:02:07 2017 MST |
---|
27 | SMART support is: Available - device has SMART capability. |
---|
28 | SMART support is: Enabled |
---|
29 | AAM feature is: Unavailable |
---|
30 | APM level is: 128 (minimum power consumption without standby) |
---|
31 | Rd look-ahead is: Enabled |
---|
32 | Write cache is: Enabled |
---|
33 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
34 | Wt Cache Reorder: Enabled |
---|
35 | |
---|
36 | === START OF READ SMART DATA SECTION === |
---|
37 | SMART overall-health self-assessment test result: PASSED |
---|
38 | |
---|
39 | General SMART Values: |
---|
40 | Offline data collection status: (0x00) Offline data collection activity |
---|
41 | was never started. |
---|
42 | Auto Offline Data Collection: Disabled. |
---|
43 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
44 | without error or no self-test has ever |
---|
45 | been run. |
---|
46 | Total time to complete Offline |
---|
47 | data collection: ( 1064) seconds. |
---|
48 | Offline data collection |
---|
49 | capabilities: (0x1b) SMART execute Offline immediate. |
---|
50 | Auto Offline data collection on/off support. |
---|
51 | Suspend Offline collection upon new |
---|
52 | command. |
---|
53 | Offline surface scan supported. |
---|
54 | Self-test supported. |
---|
55 | No Conveyance Self-test supported. |
---|
56 | No Selective Self-test supported. |
---|
57 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
58 | power-saving mode. |
---|
59 | Supports SMART auto save timer. |
---|
60 | Error logging capability: (0x01) Error logging supported. |
---|
61 | General Purpose Logging supported. |
---|
62 | Short self-test routine |
---|
63 | recommended polling time: ( 2) minutes. |
---|
64 | Extended self-test routine |
---|
65 | recommended polling time: ( 418) minutes. |
---|
66 | SCT capabilities: (0x30b5) SCT Status supported. |
---|
67 | SCT Feature Control supported. |
---|
68 | SCT Data Table supported. |
---|
69 | |
---|
70 | SMART Attributes Data Structure revision number: 16 |
---|
71 | Vendor Specific SMART Attributes with Thresholds: |
---|
72 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
73 | 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 |
---|
74 | 3 Spin_Up_Time POS--K 253 253 021 - 5166 |
---|
75 | 4 Start_Stop_Count -O--CK 099 099 000 - 1573 |
---|
76 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 |
---|
77 | 9 Power_On_Hours -O--CK 097 097 000 - 2522 |
---|
78 | 10 Spin_Retry_Count -O--CK 100 100 000 - 0 |
---|
79 | 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 |
---|
80 | 12 Power_Cycle_Count -O--CK 100 100 000 - 264 |
---|
81 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 242 |
---|
82 | 193 Load_Cycle_Count -O--CK 199 199 000 - 4231 |
---|
83 | 194 Temperature_Celsius -O---K 120 095 000 - 32 |
---|
84 | 197 Current_Pending_Sector -O--CK 200 200 000 - 0 |
---|
85 | 198 Offline_Uncorrectable ----CK 100 253 000 - 0 |
---|
86 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 |
---|
87 | 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 |
---|
88 | ||||||_ K auto-keep |
---|
89 | |||||__ C event count |
---|
90 | ||||___ R error rate |
---|
91 | |||____ S speed/performance |
---|
92 | ||_____ O updated online |
---|
93 | |______ P prefailure warning |
---|
94 | |
---|
95 | General Purpose Log Directory Version 1 |
---|
96 | SMART Log Directory Version 1 [multi-sector log support] |
---|
97 | Address Access R/W Size Description |
---|
98 | 0x00 GPL,SL R/O 1 Log Directory |
---|
99 | 0x01 SL R/O 1 Summary SMART error log |
---|
100 | 0x02 SL R/O 5 Comprehensive SMART error log |
---|
101 | 0x03 GPL R/O 6 Ext. Comprehensive SMART error log |
---|
102 | 0x06 SL R/O 1 SMART self-test log |
---|
103 | 0x07 GPL R/O 1 Extended self-test log |
---|
104 | 0x10 GPL R/O 1 SATA NCQ Queued Error log |
---|
105 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
---|
106 | 0x24 GPL R/O 274 Current Device Internal Status Data log |
---|
107 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
108 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
109 | 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log |
---|
110 | 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log |
---|
111 | 0xb7 GPL,SL VS 58 Device vendor specific log |
---|
112 | 0xbd GPL,SL VS 1 Device vendor specific log |
---|
113 | 0xc0 GPL,SL VS 1 Device vendor specific log |
---|
114 | 0xc1 GPL VS 93 Device vendor specific log |
---|
115 | 0xcf GPL VS 65535 Device vendor specific log |
---|
116 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
117 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
118 | |
---|
119 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors) |
---|
120 | No Errors Logged |
---|
121 | |
---|
122 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
123 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
---|
124 | |
---|
125 | Selective Self-tests/Logging not supported |
---|
126 | |
---|
127 | SCT Status Version: 3 |
---|
128 | SCT Version (vendor specific): 258 (0x0102) |
---|
129 | SCT Support Level: 1 |
---|
130 | Device State: Active (0) |
---|
131 | Current Temperature: 33 Celsius |
---|
132 | Power Cycle Min/Max Temperature: 28/38 Celsius |
---|
133 | Lifetime Min/Max Temperature: 19/57 Celsius |
---|
134 | Lifetime Average Temperature: 37 Celsius |
---|
135 | Under/Over Temperature Limit Count: 0/0 |
---|
136 | Vendor specific: |
---|
137 | 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
---|
138 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
---|
139 | |
---|
140 | SCT Temperature History Version: 2 |
---|
141 | Temperature Sampling Period: 1 minute |
---|
142 | Temperature Logging Interval: 1 minute |
---|
143 | Min/Max recommended Temperature: 0/60 Celsius |
---|
144 | Min/Max Temperature Limit: -41/85 Celsius |
---|
145 | Temperature History Size (Index): 128 (77) |
---|
146 | |
---|
147 | Index Estimated Time Temperature Celsius |
---|
148 | 78 2017-12-28 12:55 29 ********** |
---|
149 | ... ..( 45 skipped). .. ********** |
---|
150 | 124 2017-12-28 13:41 29 ********** |
---|
151 | 125 2017-12-28 13:42 30 *********** |
---|
152 | ... ..( 2 skipped). .. *********** |
---|
153 | 0 2017-12-28 13:45 30 *********** |
---|
154 | 1 2017-12-28 13:46 31 ************ |
---|
155 | 2 2017-12-28 13:47 31 ************ |
---|
156 | 3 2017-12-28 13:48 32 ************* |
---|
157 | 4 2017-12-28 13:49 32 ************* |
---|
158 | 5 2017-12-28 13:50 32 ************* |
---|
159 | 6 2017-12-28 13:51 ? - |
---|
160 | 7 2017-12-28 13:52 32 ************* |
---|
161 | 8 2017-12-28 13:53 32 ************* |
---|
162 | 9 2017-12-28 13:54 33 ************** |
---|
163 | ... ..( 3 skipped). .. ************** |
---|
164 | 13 2017-12-28 13:58 33 ************** |
---|
165 | 14 2017-12-28 13:59 34 *************** |
---|
166 | ... ..( 3 skipped). .. *************** |
---|
167 | 18 2017-12-28 14:03 34 *************** |
---|
168 | 19 2017-12-28 14:04 35 **************** |
---|
169 | ... ..( 8 skipped). .. **************** |
---|
170 | 28 2017-12-28 14:13 35 **************** |
---|
171 | 29 2017-12-28 14:14 34 *************** |
---|
172 | ... ..( 2 skipped). .. *************** |
---|
173 | 32 2017-12-28 14:17 34 *************** |
---|
174 | 33 2017-12-28 14:18 33 ************** |
---|
175 | ... ..( 5 skipped). .. ************** |
---|
176 | 39 2017-12-28 14:24 33 ************** |
---|
177 | 40 2017-12-28 14:25 32 ************* |
---|
178 | ... ..( 9 skipped). .. ************* |
---|
179 | 50 2017-12-28 14:35 32 ************* |
---|
180 | 51 2017-12-28 14:36 33 ************** |
---|
181 | ... ..( 2 skipped). .. ************** |
---|
182 | 54 2017-12-28 14:39 33 ************** |
---|
183 | 55 2017-12-28 14:40 34 *************** |
---|
184 | ... ..( 2 skipped). .. *************** |
---|
185 | 58 2017-12-28 14:43 34 *************** |
---|
186 | 59 2017-12-28 14:44 35 **************** |
---|
187 | ... ..( 4 skipped). .. **************** |
---|
188 | 64 2017-12-28 14:49 35 **************** |
---|
189 | 65 2017-12-28 14:50 34 *************** |
---|
190 | ... ..( 3 skipped). .. *************** |
---|
191 | 69 2017-12-28 14:54 34 *************** |
---|
192 | 70 2017-12-28 14:55 33 ************** |
---|
193 | ... ..( 6 skipped). .. ************** |
---|
194 | 77 2017-12-28 15:02 33 ************** |
---|
195 | |
---|
196 | SCT Error Recovery Control command not supported |
---|
197 | |
---|
198 | Device Statistics (GP/SMART Log 0x04) not supported |
---|
199 | |
---|
200 | SATA Phy Event Counters (GP Log 0x11) |
---|
201 | ID Size Value Description |
---|
202 | 0x0001 2 0 Command failed due to ICRC error |
---|
203 | 0x0002 2 0 R_ERR response for data FIS |
---|
204 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
205 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
206 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
207 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
208 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
209 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
210 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy |
---|
211 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET |
---|
212 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
213 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
---|
214 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
215 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
216 | 0x8000 4 3031381 Vendor specific |
---|
217 | |
---|