Ticket #959: smartctl-WDC_WD80EZAZ-11TDBA0.txt

File smartctl-WDC_WD80EZAZ-11TDBA0.txt, 8.8 KB (added by Gabriele Pohl, 6 years ago)

smartctl report contributed by Craig I Rounds

Line 
1smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.14-unRAID] (local build)
2Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: WDC WD80EZAZ-11TDBA0
6Serial Number: 7SJ3R0NW
7LU WWN Device Id: 5 000cca 252dddec9
8Firmware Version: 83.H0A83
9User Capacity: 8,001,563,222,016 bytes [8.00 TB]
10Sector Sizes: 512 bytes logical, 4096 bytes physical
11Rotation Rate: 5400 rpm
12Form Factor: 3.5 inches
13Device is: Not in smartctl database [for details use: -P showall]
14ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
15SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
16Local Time is: Thu Oct 18 18:00:41 2018 CDT
17SMART support is: Available - device has SMART capability.
18SMART support is: Enabled
19AAM feature is: Unavailable
20APM feature is: Disabled
21Rd look-ahead is: Enabled
22Write cache is: Enabled
23DSN feature is: Unavailable
24ATA Security is: Disabled, NOT FROZEN [SEC1]
25Wt Cache Reorder: Enabled
26
27=== START OF READ SMART DATA SECTION ===
28SMART overall-health self-assessment test result: PASSED
29
30General SMART Values:
31Offline data collection status: (0x82) Offline data collection activity
32 was completed without error.
33 Auto Offline Data Collection: Enabled.
34Self-test execution status: ( 0) The previous self-test routine completed
35 without error or no self-test has ever
36 been run.
37Total time to complete Offline
38data collection: ( 93) seconds.
39Offline data collection
40capabilities: (0x5b) SMART execute Offline immediate.
41 Auto Offline data collection on/off support.
42 Suspend Offline collection upon new
43 command.
44 Offline surface scan supported.
45 Self-test supported.
46 No Conveyance Self-test supported.
47 Selective Self-test supported.
48SMART capabilities: (0x0003) Saves SMART data before entering
49 power-saving mode.
50 Supports SMART auto save timer.
51Error logging capability: (0x01) Error logging supported.
52 General Purpose Logging supported.
53Short self-test routine
54recommended polling time: ( 2) minutes.
55Extended self-test routine
56recommended polling time: (1213) minutes.
57SCT capabilities: (0x003d) SCT Status supported.
58 SCT Error Recovery Control supported.
59 SCT Feature Control supported.
60 SCT Data Table supported.
61
62SMART Attributes Data Structure revision number: 16
63Vendor Specific SMART Attributes with Thresholds:
64ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
65 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
66 2 Throughput_Performance --S--- 128 128 054 - 116
67 3 Spin_Up_Time POS--- 162 162 024 - 453 (Average 361)
68 4 Start_Stop_Count -O--C- 100 100 000 - 12
69 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
70 7 Seek_Error_Rate -O-R-- 100 100 067 - 0
71 8 Seek_Time_Performance --S--- 128 128 020 - 18
72 9 Power_On_Hours -O--C- 100 100 000 - 118
73 10 Spin_Retry_Count -O--C- 100 100 060 - 0
74 12 Power_Cycle_Count -O--CK 100 100 000 - 9
75 22 Unknown_Attribute PO---K 100 100 025 - 100
76192 Power-Off_Retract_Count -O--CK 100 100 000 - 37
77193 Load_Cycle_Count -O--C- 100 100 000 - 37
78194 Temperature_Celsius -O---- 250 250 000 - 26 (Min/Max 20/29)
79196 Reallocated_Event_Count -O--CK 100 100 000 - 0
80197 Current_Pending_Sector -O---K 100 100 000 - 0
81198 Offline_Uncorrectable ---R-- 100 100 000 - 0
82199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
83 ||||||_ K auto-keep
84 |||||__ C event count
85 ||||___ R error rate
86 |||____ S speed/performance
87 ||_____ O updated online
88 |______ P prefailure warning
89
90General Purpose Log Directory Version 1
91SMART Log Directory Version 1 [multi-sector log support]
92Address Access R/W Size Description
930x00 GPL,SL R/O 1 Log Directory
940x01 SL R/O 1 Summary SMART error log
950x02 SL R/O 1 Comprehensive SMART error log
960x03 GPL R/O 1 Ext. Comprehensive SMART error log
970x04 GPL R/O 256 Device Statistics log
980x04 SL R/O 255 Device Statistics log
990x06 SL R/O 1 SMART self-test log
1000x07 GPL R/O 1 Extended self-test log
1010x08 GPL R/O 2 Power Conditions log
1020x09 SL R/W 1 Selective self-test log
1030x0c GPL R/O 5501 Pending Defects log
1040x10 GPL R/O 1 NCQ Command Error log
1050x11 GPL R/O 1 SATA Phy Event Counters log
1060x12 GPL R/O 1 SATA NCQ Non-Data log
1070x13 GPL R/O 1 SATA NCQ Send and Receive log
1080x15 GPL R/W 1 Rebuild Assist log
1090x21 GPL R/O 1 Write stream error log
1100x22 GPL R/O 1 Read stream error log
1110x24 GPL R/O 256 Current Device Internal Status Data log
1120x25 GPL R/O 256 Saved Device Internal Status Data log
1130x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1140x80-0x9f GPL,SL R/W 16 Host vendor specific log
1150xe0 GPL,SL R/W 1 SCT Command/Status
1160xe1 GPL,SL R/W 1 SCT Data Transfer
117
118SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
119No Errors Logged
120
121SMART Extended Self-test Log Version: 1 (1 sectors)
122Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
123# 1 Short offline Completed without error 00% 118 -
124# 2 Short offline Completed without error 00% 111 -
125# 3 Extended offline Completed without error 00% 105 -
126# 4 Short offline Completed without error 00% 86 -
127# 5 Short offline Completed without error 00% 20 -
128# 6 Extended offline Completed without error 00% 19 -
129# 7 Short offline Completed without error 00% 0 -
130
131SMART Selective self-test log data structure revision number 1
132 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
133 1 0 0 Not_testing
134 2 0 0 Not_testing
135 3 0 0 Not_testing
136 4 0 0 Not_testing
137 5 0 0 Not_testing
138Selective self-test flags (0x0):
139 After scanning selected spans, do NOT read-scan remainder of disk.
140If Selective self-test is pending on power-up, resume after 0 minute delay.
141
142SCT Status Version: 3
143SCT Version (vendor specific): 256 (0x0100)
144SCT Support Level: 0
145Device State: Active (0)
146Current Temperature: 26 Celsius
147Power Cycle Min/Max Temperature: 21/29 Celsius
148Lifetime Min/Max Temperature: 20/29 Celsius
149Under/Over Temperature Limit Count: 0/0
150
151SCT Temperature History Version: 2
152Temperature Sampling Period: 1 minute
153Temperature Logging Interval: 1 minute
154Min/Max recommended Temperature: 0/65 Celsius
155Min/Max Temperature Limit: -40/70 Celsius
156Temperature History Size (Index): 128 (1)
157
158Index Estimated Time Temperature Celsius
159 2 2018-10-18 15:53 22 ***
160 ... ..(113 skipped). .. ***
161 116 2018-10-18 17:47 22 ***
162 117 2018-10-18 17:48 23 ****
163 118 2018-10-18 17:49 23 ****
164 119 2018-10-18 17:50 24 *****
165 120 2018-10-18 17:51 24 *****
166 121 2018-10-18 17:52 24 *****
167 122 2018-10-18 17:53 25 ******
168 ... ..( 3 skipped). .. ******
169 126 2018-10-18 17:57 25 ******
170 127 2018-10-18 17:58 26 *******
171 0 2018-10-18 17:59 26 *******
172 1 2018-10-18 18:00 22 ***
173
174SCT Error Recovery Control:
175 Read: Disabled
176 Write: Disabled
177
178Device Statistics (GP/SMART Log 0x04) not supported
179
180Pending Defects log (GP Log 0x0c) supported [please try: '-l defects']
181
182SATA Phy Event Counters (GP Log 0x11)
183ID Size Value Description
1840x0001 2 0 Command failed due to ICRC error
1850x0002 2 0 R_ERR response for data FIS
1860x0003 2 0 R_ERR response for device-to-host data FIS
1870x0004 2 0 R_ERR response for host-to-device data FIS
1880x0005 2 0 R_ERR response for non-data FIS
1890x0006 2 0 R_ERR response for device-to-host non-data FIS
1900x0007 2 0 R_ERR response for host-to-device non-data FIS
1910x0008 2 0 Device-to-host non-data FIS retries
1920x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
1930x000a 2 4 Device-to-host register FISes sent due to a COMRESET
1940x000b 2 0 CRC errors within host-to-device FIS
1950x000d 2 0 Non-CRC errors within host-to-device FIS
196