1 | smartctl 7.1 2019-12-30 r5022 [x86_64-w64-mingw32-w10-1909] (sf-7.1-1) |
---|
2 | Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: SAMSUNG MZYLN256HCHP-000L2 |
---|
6 | Firmware Version: EMT63L0Q |
---|
7 | User Capacity: 256 060 514 304 bytes [256 GB] |
---|
8 | Sector Size: 512 bytes logical/physical |
---|
9 | Rotation Rate: Solid State Device |
---|
10 | Device is: Not in smartctl database [for details use: -P showall] |
---|
11 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c |
---|
12 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) |
---|
13 | Local Time is: Fri Oct 23 10:37:42 2020 FLEDT |
---|
14 | SMART support is: Available - device has SMART capability. |
---|
15 | SMART support is: Enabled |
---|
16 | AAM feature is: Unavailable |
---|
17 | APM feature is: Unavailable |
---|
18 | Rd look-ahead is: Enabled |
---|
19 | Write cache is: Enabled |
---|
20 | DSN feature is: Unavailable |
---|
21 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
22 | Wt Cache Reorder: Enabled |
---|
23 | |
---|
24 | === START OF READ SMART DATA SECTION === |
---|
25 | SMART overall-health self-assessment test result: PASSED |
---|
26 | |
---|
27 | General SMART Values: |
---|
28 | Offline data collection status: (0x80) Offline data collection activity |
---|
29 | was never started. |
---|
30 | Auto Offline Data Collection: Enabled. |
---|
31 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
32 | without error or no self-test has ever |
---|
33 | been run. |
---|
34 | Total time to complete Offline |
---|
35 | data collection: ( 0) seconds. |
---|
36 | Offline data collection |
---|
37 | capabilities: (0x53) SMART execute Offline immediate. |
---|
38 | Auto Offline data collection on/off support. |
---|
39 | Suspend Offline collection upon new |
---|
40 | command. |
---|
41 | No Offline surface scan supported. |
---|
42 | Self-test supported. |
---|
43 | No Conveyance Self-test supported. |
---|
44 | Selective Self-test supported. |
---|
45 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
46 | power-saving mode. |
---|
47 | Supports SMART auto save timer. |
---|
48 | Error logging capability: (0x01) Error logging supported. |
---|
49 | General Purpose Logging supported. |
---|
50 | Short self-test routine |
---|
51 | recommended polling time: ( 2) minutes. |
---|
52 | Extended self-test routine |
---|
53 | recommended polling time: ( 133) minutes. |
---|
54 | SCT capabilities: (0x003d) SCT Status supported. |
---|
55 | SCT Error Recovery Control supported. |
---|
56 | SCT Feature Control supported. |
---|
57 | SCT Data Table supported. |
---|
58 | |
---|
59 | SMART Attributes Data Structure revision number: 1 |
---|
60 | Vendor Specific SMART Attributes with Thresholds: |
---|
61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
62 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 |
---|
63 | 9 Power_On_Hours -O--CK 099 099 000 - 3947 |
---|
64 | 12 Power_Cycle_Count -O--CK 097 097 000 - 2031 |
---|
65 | 170 Unknown_Attribute -O--CK 100 100 010 - 0 |
---|
66 | 171 Unknown_Attribute -O--CK 100 100 010 - 0 |
---|
67 | 172 Unknown_Attribute -O--CK 100 100 010 - 0 |
---|
68 | 173 Unknown_Attribute PO--CK 095 095 005 - 99 |
---|
69 | 174 Unknown_Attribute -O--CK 099 099 000 - 44 |
---|
70 | 178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0 |
---|
71 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 769 |
---|
72 | 184 End-to-End_Error PO--CK 100 100 097 - 0 |
---|
73 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 |
---|
74 | 194 Temperature_Celsius -O--CK 065 054 000 - 35 |
---|
75 | 199 UDMA_CRC_Error_Count -OSRCK 099 099 000 - 1 |
---|
76 | 233 Media_Wearout_Indicator PO--C- 095 095 000 - 15946742 |
---|
77 | 241 Total_LBAs_Written -O--CK 099 099 000 - 13143 |
---|
78 | 242 Total_LBAs_Read -O--CK 099 099 000 - 17816 |
---|
79 | 249 Unknown_Attribute -O--CK 099 099 000 - 25344 |
---|
80 | ||||||_ K auto-keep |
---|
81 | |||||__ C event count |
---|
82 | ||||___ R error rate |
---|
83 | |||____ S speed/performance |
---|
84 | ||_____ O updated online |
---|
85 | |______ P prefailure warning |
---|
86 | |
---|
87 | General Purpose Log Directory Version 1 |
---|
88 | SMART Log Directory Version 1 [multi-sector log support] |
---|
89 | Address Access R/W Size Description |
---|
90 | 0x00 GPL,SL R/O 1 Log Directory |
---|
91 | 0x01 SL R/O 1 Summary SMART error log |
---|
92 | 0x02 SL R/O 1 Comprehensive SMART error log |
---|
93 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log |
---|
94 | 0x06 SL R/O 1 SMART self-test log |
---|
95 | 0x07 GPL R/O 1 Extended self-test log |
---|
96 | 0x09 SL R/W 1 Selective self-test log |
---|
97 | 0x10 GPL R/O 1 NCQ Command Error log |
---|
98 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
---|
99 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log |
---|
100 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
101 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
102 | 0xdf GPL,SL VS 1 Device vendor specific log |
---|
103 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
104 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
105 | |
---|
106 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
---|
107 | No Errors Logged |
---|
108 | |
---|
109 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
110 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
---|
111 | |
---|
112 | Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. |
---|
113 | SMART Selective self-test log data structure revision number 1 |
---|
114 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
115 | 1 0 0 Not_testing |
---|
116 | 2 0 0 Not_testing |
---|
117 | 3 0 0 Not_testing |
---|
118 | 4 0 0 Not_testing |
---|
119 | 5 0 0 Not_testing |
---|
120 | 255 0 65535 Read_scanning was never started |
---|
121 | Selective self-test flags (0x0): |
---|
122 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
123 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
124 | |
---|
125 | SCT Status Version: 3 |
---|
126 | SCT Version (vendor specific): 256 (0x0100) |
---|
127 | Device State: SCT command executing in background (5) |
---|
128 | Current Temperature: 35 Celsius |
---|
129 | Power Cycle Min/Max Temperature: 30/40 Celsius |
---|
130 | Lifetime Min/Max Temperature: 0/70 Celsius |
---|
131 | Under/Over Temperature Limit Count: 4294967295/4294901760 |
---|
132 | SMART Status: 0xffff (Reserved) |
---|
133 | |
---|
134 | SCT Temperature History Version: 3 (Unknown, should be 2) |
---|
135 | Temperature Sampling Period: 1 minute |
---|
136 | Temperature Logging Interval: 10 minutes |
---|
137 | Min/Max recommended Temperature: 0/70 Celsius |
---|
138 | Min/Max Temperature Limit: 0/70 Celsius |
---|
139 | Temperature History Size (Index): 128 (4) |
---|
140 | |
---|
141 | Index Estimated Time Temperature Celsius |
---|
142 | 5 2020-10-22 13:20 ? - |
---|
143 | ... ..(121 skipped). .. - |
---|
144 | 127 2020-10-23 09:40 ? - |
---|
145 | 0 2020-10-23 09:50 40 ********************* |
---|
146 | 1 2020-10-23 10:00 30 *********** |
---|
147 | 2 2020-10-23 10:10 32 ************* |
---|
148 | 3 2020-10-23 10:20 33 ************** |
---|
149 | 4 2020-10-23 10:30 35 **************** |
---|
150 | |
---|
151 | SCT Error Recovery Control: |
---|
152 | Read: Disabled |
---|
153 | Write: Disabled |
---|
154 | |
---|
155 | Device Statistics (GP/SMART Log 0x04) not supported |
---|
156 | |
---|
157 | Pending Defects log (GP Log 0x0c) not supported |
---|
158 | |
---|
159 | SATA Phy Event Counters (GP Log 0x11) |
---|
160 | ID Size Value Description |
---|
161 | 0x0001 2 0 Command failed due to ICRC error |
---|
162 | 0x0002 2 0 R_ERR response for data FIS |
---|
163 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
164 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
165 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
166 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
167 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
168 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
169 | 0x0009 2 6727 Transition from drive PhyRdy to drive PhyNRdy |
---|
170 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET |
---|
171 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
172 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
---|
173 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
174 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
---|
175 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
176 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
---|
177 | |
---|