1 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-0.bpo.1-amd64] (local build) |
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: SSD SATAIII 16GB |
---|
6 | Serial Number: i |
---|
7 | LU WWN Device Id: 5 001b44 000000000 |
---|
8 | Firmware Version: i221100 |
---|
9 | User Capacity: 16,013,942,784 bytes [16.0 GB] |
---|
10 | Sector Size: 512 bytes logical/physical |
---|
11 | Rotation Rate: Solid State Device |
---|
12 | Form Factor: 1.8 inches |
---|
13 | Device is: Not in smartctl database [for details use: -P showall] |
---|
14 | ATA Version is: ACS-2 T13/2015-D revision 3 |
---|
15 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) |
---|
16 | Local Time is: Thu Nov 9 13:14:58 2017 CET |
---|
17 | SMART support is: Available - device has SMART capability. |
---|
18 | SMART support is: Enabled |
---|
19 | AAM feature is: Unavailable |
---|
20 | APM level is: 254 (maximum performance) |
---|
21 | Rd look-ahead is: Enabled |
---|
22 | Write cache is: Enabled |
---|
23 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
24 | Wt Cache Reorder: Unavailable |
---|
25 | |
---|
26 | === START OF READ SMART DATA SECTION === |
---|
27 | SMART overall-health self-assessment test result: PASSED |
---|
28 | |
---|
29 | General SMART Values: |
---|
30 | Offline data collection status: (0x00) Offline data collection activity |
---|
31 | was never started. |
---|
32 | Auto Offline Data Collection: Disabled. |
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
34 | without error or no self-test has ever |
---|
35 | been run. |
---|
36 | Total time to complete Offline |
---|
37 | data collection: ( 120) seconds. |
---|
38 | Offline data collection |
---|
39 | capabilities: (0x51) SMART execute Offline immediate. |
---|
40 | No Auto Offline data collection support. |
---|
41 | Suspend Offline collection upon new |
---|
42 | command. |
---|
43 | No Offline surface scan supported. |
---|
44 | Self-test supported. |
---|
45 | No Conveyance Self-test supported. |
---|
46 | Selective Self-test supported. |
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
48 | power-saving mode. |
---|
49 | Supports SMART auto save timer. |
---|
50 | Error logging capability: (0x01) Error logging supported. |
---|
51 | General Purpose Logging supported. |
---|
52 | Short self-test routine |
---|
53 | recommended polling time: ( 2) minutes. |
---|
54 | Extended self-test routine |
---|
55 | recommended polling time: ( 3) minutes. |
---|
56 | |
---|
57 | SMART Attributes Data Structure revision number: 1 |
---|
58 | Vendor Specific SMART Attributes with Thresholds: |
---|
59 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
60 | 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0 |
---|
61 | 9 Power_On_Hours -O---- 100 100 000 - 39 |
---|
62 | 12 Power_Cycle_Count -O---- 100 100 000 - 5 |
---|
63 | 165 Unknown_Attribute -O---- 100 100 000 - 303 |
---|
64 | 171 Unknown_Attribute -O---- 100 100 000 - 0 |
---|
65 | 172 Unknown_Attribute -O---- 100 100 000 - 0 |
---|
66 | 173 Unknown_Attribute -O---- 100 100 000 - 0 |
---|
67 | 174 Unknown_Attribute -O---- 100 100 000 - 2 |
---|
68 | 187 Reported_Uncorrect -O---- 100 100 000 - 0 |
---|
69 | 194 Temperature_Celsius -O---K 063 037 000 - 37 (Min/Max 20/45) |
---|
70 | 230 Unknown_SSD_Attribute -O---- 100 100 000 - 0 |
---|
71 | 232 Available_Reservd_Space PO---- 100 100 005 - 0 |
---|
72 | 234 Unknown_Attribute -O---- 100 100 000 - 0 |
---|
73 | 241 Total_LBAs_Written -O---- 100 100 000 - 5049288 |
---|
74 | 242 Total_LBAs_Read -O---- 100 100 000 - 6685228 |
---|
75 | ||||||_ K auto-keep |
---|
76 | |||||__ C event count |
---|
77 | ||||___ R error rate |
---|
78 | |||____ S speed/performance |
---|
79 | ||_____ O updated online |
---|
80 | |______ P prefailure warning |
---|
81 | |
---|
82 | General Purpose Log Directory Version 1 |
---|
83 | SMART Log Directory Version 1 [multi-sector log support] |
---|
84 | Address Access R/W Size Description |
---|
85 | 0x00 GPL,SL R/O 1 Log Directory |
---|
86 | 0x01 GPL,SL R/O 1 Summary SMART error log |
---|
87 | 0x03 GPL,SL R/O 16 Ext. Comprehensive SMART error log |
---|
88 | 0x04 GPL,SL R/O 8 Device Statistics log |
---|
89 | 0x06 GPL,SL R/O 1 SMART self-test log |
---|
90 | 0x09 GPL,SL R/W 1 Selective self-test log |
---|
91 | 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log |
---|
92 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log |
---|
93 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
94 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
95 | 0xa1 GPL,SL VS 1 Device vendor specific log |
---|
96 | 0xa2 GPL,SL VS 2 Device vendor specific log |
---|
97 | 0xa3 GPL,SL VS 1 Device vendor specific log |
---|
98 | 0xa6-0xa7 GPL,SL VS 255 Device vendor specific log |
---|
99 | |
---|
100 | Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. |
---|
101 | SMART Extended Comprehensive Error Log Version: 1 (16 sectors) |
---|
102 | No Errors Logged |
---|
103 | |
---|
104 | SMART Extended Self-test Log (GP Log 0x07) not supported |
---|
105 | |
---|
106 | SMART Self-test log structure revision number 1 |
---|
107 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
108 | # 1 Short offline Completed without error 00% 39 - |
---|
109 | # 2 Short offline Completed without error 00% 0 - |
---|
110 | |
---|
111 | SMART Selective self-test log data structure revision number 1 |
---|
112 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
113 | 1 0 0 Not_testing |
---|
114 | 2 0 0 Not_testing |
---|
115 | 3 0 0 Not_testing |
---|
116 | 4 0 0 Not_testing |
---|
117 | 5 0 0 Not_testing |
---|
118 | Selective self-test flags (0x0): |
---|
119 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
120 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
121 | |
---|
122 | SCT Commands not supported |
---|
123 | |
---|
124 | Device Statistics (GP Log 0x04) |
---|
125 | Page Offset Size Value Flags Description |
---|
126 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
---|
127 | 0x05 0x008 1 37 --- Current Temperature |
---|
128 | 0x05 0x010 1 - --- Average Short Term Temperature |
---|
129 | 0x05 0x018 1 - --- Average Long Term Temperature |
---|
130 | 0x05 0x020 1 43 --- Highest Temperature |
---|
131 | 0x05 0x028 1 41 --- Lowest Temperature |
---|
132 | 0x05 0x030 1 42 --- Highest Average Short Term Temperature |
---|
133 | 0x05 0x038 1 42 --- Lowest Average Short Term Temperature |
---|
134 | 0x05 0x040 1 - --- Highest Average Long Term Temperature |
---|
135 | 0x05 0x048 1 - --- Lowest Average Long Term Temperature |
---|
136 | 0x05 0x050 4 0 --- Time in Over-Temperature |
---|
137 | 0x05 0x058 1 95 --- Specified Maximum Operating Temperature |
---|
138 | 0x05 0x060 4 0 --- Time in Under-Temperature |
---|
139 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature |
---|
140 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
---|
141 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |
---|
142 | |||_ C monitored condition met |
---|
143 | ||__ D supports DSN |
---|
144 | |___ N normalized value |
---|
145 | |
---|
146 | SATA Phy Event Counters (GP Log 0x11) |
---|
147 | ID Size Value Description |
---|
148 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
149 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
150 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
151 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
152 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy |
---|
153 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET |
---|
154 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
155 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
156 | 0x0001 2 0 Command failed due to ICRC error |
---|
157 | |
---|