| 1 | smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win7-sp1] (sf-6.5-1)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: WDC WD4002FYYZ-01B7CB0
|
|---|
| 6 | Firmware Version: 01.01M02
|
|---|
| 7 | User Capacity: 4,000,787,030,016 bytes [4.00 TB]
|
|---|
| 8 | Sector Size: 512 bytes logical/physical
|
|---|
| 9 | Rotation Rate: 7200 rpm
|
|---|
| 10 | Form Factor: 3.5 inches
|
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 12 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
|
|---|
| 13 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 14 | Local Time is: Tue Oct 03 01:52:10 2017 WEDT
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 |
|
|---|
| 18 | === START OF READ SMART DATA SECTION ===
|
|---|
| 19 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 20 |
|
|---|
| 21 | General SMART Values:
|
|---|
| 22 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 23 | was completed without error.
|
|---|
| 24 | Auto Offline Data Collection: Enabled.
|
|---|
| 25 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 26 |
|
|---|
| 27 | without error or no self-test has ever
|
|---|
| 28 | been run.
|
|---|
| 29 | Total time to complete Offline
|
|---|
| 30 | data collection: ( 113) seconds.
|
|---|
| 31 | Offline data collection
|
|---|
| 32 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 33 | Auto Offline data collection on/off supp
|
|---|
| 34 | ort.
|
|---|
| 35 | Suspend Offline collection upon new
|
|---|
| 36 | command.
|
|---|
| 37 | Offline surface scan supported.
|
|---|
| 38 | Self-test supported.
|
|---|
| 39 | No Conveyance Self-test supported.
|
|---|
| 40 | Selective Self-test supported.
|
|---|
| 41 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 42 | power-saving mode.
|
|---|
| 43 | Supports SMART auto save timer.
|
|---|
| 44 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 45 | General Purpose Logging supported.
|
|---|
| 46 | Short self-test routine
|
|---|
| 47 | recommended polling time: ( 2) minutes.
|
|---|
| 48 | Extended self-test routine
|
|---|
| 49 | recommended polling time: ( 571) minutes.
|
|---|
| 50 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 51 | SCT Error Recovery Control supported.
|
|---|
| 52 | SCT Feature Control supported.
|
|---|
| 53 | SCT Data Table supported.
|
|---|
| 54 |
|
|---|
| 55 | SMART Attributes Data Structure revision number: 16
|
|---|
| 56 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 57 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
|
|---|
| 58 | FAILED RAW_VALUE
|
|---|
| 59 | 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always -
|
|---|
| 60 | 0
|
|---|
| 61 | 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline -
|
|---|
| 62 | 104
|
|---|
| 63 | 3 Spin_Up_Time 0x0007 137 137 024 Pre-fail Always -
|
|---|
| 64 | 480 (Average 480)
|
|---|
| 65 | 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always -
|
|---|
| 66 | 69
|
|---|
| 67 | 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always -
|
|---|
| 68 | 0
|
|---|
| 69 | 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always -
|
|---|
| 70 | 0
|
|---|
| 71 | 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline -
|
|---|
| 72 | 18
|
|---|
| 73 | 9 Power_On_Hours 0x0012 100 100 000 Old_age Always -
|
|---|
| 74 | 208
|
|---|
| 75 | 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always -
|
|---|
| 76 | 0
|
|---|
| 77 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always -
|
|---|
| 78 | 41
|
|---|
| 79 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always -
|
|---|
| 80 | 129
|
|---|
| 81 | 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always -
|
|---|
| 82 | 129
|
|---|
| 83 | 194 Temperature_Celsius 0x0002 162 162 000 Old_age Always -
|
|---|
| 84 | 37 (Min/Max 23/40)
|
|---|
| 85 | 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always -
|
|---|
| 86 | 0
|
|---|
| 87 | 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always -
|
|---|
| 88 | 0
|
|---|
| 89 | 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline -
|
|---|
| 90 | 0
|
|---|
| 91 | 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always -
|
|---|
| 92 | 0
|
|---|
| 93 |
|
|---|
| 94 | SMART Error Log Version: 1
|
|---|
| 95 | No Errors Logged
|
|---|
| 96 |
|
|---|
| 97 | SMART Self-test log structure revision number 1
|
|---|
| 98 | Num Test_Description Status Remaining LifeTime(hours) LBA
|
|---|
| 99 | _of_first_error
|
|---|
| 100 | # 1 Short offline Completed without error 00% 177 -
|
|---|
| 101 |
|
|---|
| 102 | SMART Selective self-test log data structure revision number 1
|
|---|
| 103 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 104 | 1 0 0 Not_testing
|
|---|
| 105 | 2 0 0 Not_testing
|
|---|
| 106 | 3 0 0 Not_testing
|
|---|
| 107 | 4 0 0 Not_testing
|
|---|
| 108 | 5 0 0 Not_testing
|
|---|
| 109 | Selective self-test flags (0x0):
|
|---|
| 110 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 111 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 112 |
|
|---|
