Ticket #906: smartctl-WD-WDBCKA0080HBK-NESN.txt

File smartctl-WD-WDBCKA0080HBK-NESN.txt, 8.4 KB (added by henryjb99, 6 years ago)
Line 
1smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.12.14-300.fc26.x86_64] (local build)
2Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: WDC WD80EFAX-68LHPN0
6Serial Number: 7SGD94HC
7LU WWN Device Id: 5 000cca 252c596c8
8Firmware Version: 83.H0A83
9User Capacity: 8,001,563,222,016 bytes [8.00 TB]
10Sector Sizes: 512 bytes logical, 4096 bytes physical
11Rotation Rate: 5400 rpm
12Form Factor: 3.5 inches
13Device is: Not in smartctl database [for details use: -P showall]
14ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
15SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
16Local Time is: Sun Oct 1 20:30:51 2017 EDT
17SMART support is: Available - device has SMART capability.
18SMART support is: Enabled
19AAM feature is: Unavailable
20APM level is: 164 (intermediate level without standby)
21Rd look-ahead is: Enabled
22Write cache is: Enabled
23ATA Security is: Disabled, NOT FROZEN [SEC1]
24Wt Cache Reorder: Enabled
25
26=== START OF READ SMART DATA SECTION ===
27SMART overall-health self-assessment test result: PASSED
28
29General SMART Values:
30Offline data collection status: (0x00) Offline data collection activity
31 was never started.
32 Auto Offline Data Collection: Disabled.
33Self-test execution status: ( 0) The previous self-test routine completed
34 without error or no self-test has ever
35 been run.
36Total time to complete Offline
37data collection: ( 93) seconds.
38Offline data collection
39capabilities: (0x5b) SMART execute Offline immediate.
40 Auto Offline data collection on/off support.
41 Suspend Offline collection upon new
42 command.
43 Offline surface scan supported.
44 Self-test supported.
45 No Conveyance Self-test supported.
46 Selective Self-test supported.
47SMART capabilities: (0x0003) Saves SMART data before entering
48 power-saving mode.
49 Supports SMART auto save timer.
50Error logging capability: (0x01) Error logging supported.
51 General Purpose Logging supported.
52Short self-test routine
53recommended polling time: ( 2) minutes.
54Extended self-test routine
55recommended polling time: ( 929) minutes.
56SCT capabilities: (0x003d) SCT Status supported.
57 SCT Error Recovery Control supported.
58 SCT Feature Control supported.
59 SCT Data Table supported.
60
61SMART Attributes Data Structure revision number: 16
62Vendor Specific SMART Attributes with Thresholds:
63ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
64 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
65 2 Throughput_Performance --S--- 129 129 054 - 112
66 3 Spin_Up_Time POS--- 253 253 024 - 170 (Average 109)
67 4 Start_Stop_Count -O--C- 100 100 000 - 65
68 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
69 7 Seek_Error_Rate -O-R-- 100 100 067 - 0
70 8 Seek_Time_Performance --S--- 128 128 020 - 18
71 9 Power_On_Hours -O--C- 100 100 000 - 142
72 10 Spin_Retry_Count -O--C- 100 100 060 - 0
73 12 Power_Cycle_Count -O--CK 100 100 000 - 42
74 22 Unknown_Attribute PO---K 100 100 025 - 100
75192 Power-Off_Retract_Count -O--CK 100 100 000 - 69
76193 Load_Cycle_Count -O--C- 100 100 000 - 69
77194 Temperature_Celsius -O---- 158 158 000 - 41 (Min/Max 22/46)
78196 Reallocated_Event_Count -O--CK 100 100 000 - 0
79197 Current_Pending_Sector -O---K 100 100 000 - 0
80198 Offline_Uncorrectable ---R-- 100 100 000 - 0
81199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
82 ||||||_ K auto-keep
83 |||||__ C event count
84 ||||___ R error rate
85 |||____ S speed/performance
86 ||_____ O updated online
87 |______ P prefailure warning
88
89General Purpose Log Directory Version 1
90SMART Log Directory Version 1 [multi-sector log support]
91Address Access R/W Size Description
920x00 GPL,SL R/O 1 Log Directory
930x01 SL R/O 1 Summary SMART error log
940x02 SL R/O 1 Comprehensive SMART error log
950x03 GPL R/O 1 Ext. Comprehensive SMART error log
960x04 GPL R/O 256 Device Statistics log
970x04 SL R/O 255 Device Statistics log
980x06 SL R/O 1 SMART self-test log
990x07 GPL R/O 1 Extended self-test log
1000x08 GPL R/O 2 Power Conditions log
1010x09 SL R/W 1 Selective self-test log
1020x0c GPL R/O 5501 Pending Defects log
1030x10 GPL R/O 1 SATA NCQ Queued Error log
1040x11 GPL R/O 1 SATA Phy Event Counters log
1050x12 GPL R/O 1 SATA NCQ NON-DATA log
1060x13 GPL R/O 1 SATA NCQ Send and Receive log
1070x15 GPL,SL R/W 1 SATA Rebuild Assist log
1080x21 GPL R/O 1 Write stream error log
1090x22 GPL R/O 1 Read stream error log
1100x24 GPL R/O 256 Current Device Internal Status Data log
1110x25 GPL R/O 256 Saved Device Internal Status Data log
1120x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1130x80-0x9f GPL,SL R/W 16 Host vendor specific log
1140xe0 GPL,SL R/W 1 SCT Command/Status
1150xe1 GPL,SL R/W 1 SCT Data Transfer
116
117SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
118No Errors Logged
119
120SMART Extended Self-test Log Version: 1 (1 sectors)
121Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
122# 1 Short offline Completed without error 00% 142 -
123# 2 Short offline Completed without error 00% 125 -
124# 3 Short offline Completed without error 00% 105 -
125# 4 Short offline Completed without error 00% 81 -
126# 5 Short offline Completed without error 00% 57 -
127# 6 Short offline Completed without error 00% 33 -
128# 7 Short offline Completed without error 00% 9 -
129
130SMART Selective self-test log data structure revision number 1
131 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
132 1 0 0 Not_testing
133 2 0 0 Not_testing
134 3 0 0 Not_testing
135 4 0 0 Not_testing
136 5 0 0 Not_testing
137Selective self-test flags (0x0):
138 After scanning selected spans, do NOT read-scan remainder of disk.
139If Selective self-test is pending on power-up, resume after 0 minute delay.
140
141SCT Status Version: 3
142SCT Version (vendor specific): 256 (0x0100)
143SCT Support Level: 0
144Device State: Active (0)
145Current Temperature: 41 Celsius
146Power Cycle Min/Max Temperature: 41/41 Celsius
147Lifetime Min/Max Temperature: 22/46 Celsius
148Under/Over Temperature Limit Count: 0/0
149
150SCT Temperature History Version: 2
151Temperature Sampling Period: 1 minute
152Temperature Logging Interval: 1 minute
153Min/Max recommended Temperature: 0/65 Celsius
154Min/Max Temperature Limit: -40/70 Celsius
155Temperature History Size (Index): 128 (95)
156
157Index Estimated Time Temperature Celsius
158 96 2017-10-01 18:23 41 **********************
159 ... ..(126 skipped). .. **********************
160 95 2017-10-01 20:30 41 **********************
161
162SCT Error Recovery Control:
163 Read: 70 (7.0 seconds)
164 Write: 70 (7.0 seconds)
165
166Device Statistics (GP/SMART Log 0x04) not supported
167
168SATA Phy Event Counters (GP Log 0x11)
169ID Size Value Description
1700x0001 2 0 Command failed due to ICRC error
1710x0002 2 0 R_ERR response for data FIS
1720x0003 2 0 R_ERR response for device-to-host data FIS
1730x0004 2 0 R_ERR response for host-to-device data FIS
1740x0005 2 0 R_ERR response for non-data FIS
1750x0006 2 0 R_ERR response for device-to-host non-data FIS
1760x0007 2 0 R_ERR response for host-to-device non-data FIS
1770x0008 2 0 Device-to-host non-data FIS retries
1780x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
1790x000a 2 1 Device-to-host register FISes sent due to a COMRESET
1800x000b 2 0 CRC errors within host-to-device FIS
1810x000d 2 0 Non-CRC errors within host-to-device FIS
182