| 1 | smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-714.10.2.lve1.5.17.1.el7.x86_64] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: ADATA SP580
|
|---|
| 6 | Add. Product Id: mavlsata
|
|---|
| 7 | Firmware Version: V3.10
|
|---|
| 8 | User Capacity: 120 034 123 776 bytes [120 GB]
|
|---|
| 9 | Sector Size: 512 bytes logical/physical
|
|---|
| 10 | Rotation Rate: Solid State Device
|
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 12 | ATA Version is: ACS-3 T13/2161-D revision 4
|
|---|
| 13 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
|---|
| 14 | Local Time is: Wed Oct 10 13:37:15 2018 MSK
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 | AAM feature is: Unavailable
|
|---|
| 18 | APM feature is: Disabled
|
|---|
| 19 | Rd look-ahead is: Enabled
|
|---|
| 20 | Write cache is: Enabled
|
|---|
| 21 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 22 | Wt Cache Reorder: Unavailable
|
|---|
| 23 |
|
|---|
| 24 | === START OF READ SMART DATA SECTION ===
|
|---|
| 25 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 26 |
|
|---|
| 27 | General SMART Values:
|
|---|
| 28 | Offline data collection status: (0x02) Offline data collection activity
|
|---|
| 29 | was completed without error.
|
|---|
| 30 | Auto Offline Data Collection: Disabled.
|
|---|
| 31 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 32 | without error or no self-test has ever
|
|---|
| 33 | been run.
|
|---|
| 34 | Total time to complete Offline
|
|---|
| 35 | data collection: ( 0) seconds.
|
|---|
| 36 | Offline data collection
|
|---|
| 37 | capabilities: (0x35) SMART execute Offline immediate.
|
|---|
| 38 | No Auto Offline data collection support.
|
|---|
| 39 | Abort Offline collection upon new
|
|---|
| 40 | command.
|
|---|
| 41 | No Offline surface scan supported.
|
|---|
| 42 | Self-test supported.
|
|---|
| 43 | Conveyance Self-test supported.
|
|---|
| 44 | No Selective Self-test supported.
|
|---|
| 45 | SMART capabilities: (0x0002) Does not save SMART data before
|
|---|
| 46 | entering power-saving mode.
|
|---|
| 47 | Supports SMART auto save timer.
|
|---|
| 48 | Error logging capability: (0x00) Error logging NOT supported.
|
|---|
| 49 | General Purpose Logging supported.
|
|---|
| 50 | Short self-test routine
|
|---|
| 51 | recommended polling time: ( 1) minutes.
|
|---|
| 52 | Extended self-test routine
|
|---|
| 53 | recommended polling time: ( 1) minutes.
|
|---|
| 54 | Conveyance self-test routine
|
|---|
| 55 | recommended polling time: ( 1) minutes.
|
|---|
| 56 |
|
|---|
| 57 | SMART Attributes Data Structure revision number: 5
|
|---|
| 58 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 59 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 60 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|---|
| 61 | 9 Power_On_Hours PO--CK 100 100 010 - 4843
|
|---|
| 62 | 12 Power_Cycle_Count PO--CK 100 100 010 - 7
|
|---|
| 63 | 161 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 64 | 164 Unknown_Attribute PO--CK 100 100 010 - 18209
|
|---|
| 65 | 165 Unknown_Attribute PO--CK 100 100 010 - 42
|
|---|
| 66 | 166 Unknown_Attribute PO--CK 100 100 010 - 24
|
|---|
| 67 | 167 Unknown_Attribute PO--CK 100 100 010 - 39
|
|---|
| 68 | 169 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 69 | 176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0
|
|---|
| 70 | 177 Wear_Leveling_Count PO--CK 100 100 010 - 0
|
|---|
| 71 | 178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0
|
|---|
| 72 | 192 Power-Off_Retract_Count PO--CK 100 100 010 - 1
|
|---|
| 73 | 194 Temperature_Celsius PO--CK 100 100 010 - 40
|
|---|
| 74 | 195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0
|
|---|
| 75 | 199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0
|
|---|
| 76 | 241 Total_LBAs_Written PO--CK 100 100 010 - 12777
|
|---|
| 77 | 242 Total_LBAs_Read PO--CK 100 100 010 - 5474
|
|---|
| 78 | 243 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 79 | 244 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 80 | 245 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 81 | 246 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 82 | 250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0
|
|---|
| 83 | 251 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 84 | 252 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 85 | 253 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 86 | 254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0
|
|---|
| 87 | ||||||_ K auto-keep
|
|---|
| 88 | |||||__ C event count
|
|---|
| 89 | ||||___ R error rate
|
|---|
| 90 | |||____ S speed/performance
|
|---|
| 91 | ||_____ O updated online
|
|---|
| 92 | |______ P prefailure warning
|
|---|
| 93 |
|
|---|
| 94 | General Purpose Log Directory Version 1
|
|---|
| 95 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 96 | Address Access R/W Size Description
|
|---|
| 97 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 98 | 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log
|
|---|
| 99 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 100 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 101 |
|
|---|
| 102 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|---|
| 103 |
|
|---|
| 104 | SMART Error Log not supported
|
|---|
| 105 |
|
|---|
| 106 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
|---|
| 107 |
|
|---|
| 108 | SMART Self-test Log not supported
|
|---|
| 109 |
|
|---|
| 110 | Selective Self-tests/Logging not supported
|
|---|
| 111 |
|
|---|
| 112 | SCT Commands not supported
|
|---|
| 113 |
|
|---|
| 114 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 115 |
|
|---|
| 116 | SATA Phy Event Counters (GP Log 0x11) not supported
|
|---|
| 117 |
|
|---|
