| 1 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.0-96-generic] (local build)
|
|---|
| 2 | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: ADATA SP580
|
|---|
| 6 | Firmware Version: V3.10
|
|---|
| 7 | User Capacity: 120,034,123,776 bytes [120 GB]
|
|---|
| 8 | Sector Size: 512 bytes logical/physical
|
|---|
| 9 | Rotation Rate: Solid State Device
|
|---|
| 10 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 11 | ATA Version is: ACS-3 (unknown minor revision code: 0x011b)
|
|---|
| 12 | SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 13 | Local Time is: Sat Sep 30 22:47:41 2017 EDT
|
|---|
| 14 | SMART support is: Available - device has SMART capability.
|
|---|
| 15 | SMART support is: Enabled
|
|---|
| 16 | AAM feature is: Unavailable
|
|---|
| 17 | APM level is: 254 (maximum performance)
|
|---|
| 18 | Rd look-ahead is: Enabled
|
|---|
| 19 | Write cache is: Enabled
|
|---|
| 20 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 21 | Wt Cache Reorder: Unavailable
|
|---|
| 22 |
|
|---|
| 23 | === START OF READ SMART DATA SECTION ===
|
|---|
| 24 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 25 |
|
|---|
| 26 | General SMART Values:
|
|---|
| 27 | Offline data collection status: (0x02) Offline data collection activity
|
|---|
| 28 | was completed without error.
|
|---|
| 29 | Auto Offline Data Collection: Disabled.
|
|---|
| 30 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 31 | without error or no self-test has ever
|
|---|
| 32 | been run.
|
|---|
| 33 | Total time to complete Offline
|
|---|
| 34 | data collection: ( 0) seconds.
|
|---|
| 35 | Offline data collection
|
|---|
| 36 | capabilities: (0x35) SMART execute Offline immediate.
|
|---|
| 37 | No Auto Offline data collection support.
|
|---|
| 38 | Abort Offline collection upon new
|
|---|
| 39 | command.
|
|---|
| 40 | No Offline surface scan supported.
|
|---|
| 41 | Self-test supported.
|
|---|
| 42 | Conveyance Self-test supported.
|
|---|
| 43 | No Selective Self-test supported.
|
|---|
| 44 | SMART capabilities: (0x0002) Does not save SMART data before
|
|---|
| 45 | entering power-saving mode.
|
|---|
| 46 | Supports SMART auto save timer.
|
|---|
| 47 | Error logging capability: (0x00) Error logging NOT supported.
|
|---|
| 48 | General Purpose Logging supported.
|
|---|
| 49 | Short self-test routine
|
|---|
| 50 | recommended polling time: ( 1) minutes.
|
|---|
| 51 | Extended self-test routine
|
|---|
| 52 | recommended polling time: ( 1) minutes.
|
|---|
| 53 | Conveyance self-test routine
|
|---|
| 54 | recommended polling time: ( 1) minutes.
|
|---|
| 55 |
|
|---|
| 56 | SMART Attributes Data Structure revision number: 5
|
|---|
| 57 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 58 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 59 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|---|
| 60 | 9 Power_On_Hours PO--CK 100 100 010 - 0
|
|---|
| 61 | 12 Power_Cycle_Count PO--CK 100 100 010 - 1
|
|---|
| 62 | 161 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 63 | 164 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 64 | 165 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 65 | 166 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 66 | 167 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 67 | 169 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 68 | 176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0
|
|---|
| 69 | 177 Wear_Leveling_Count PO--CK 100 100 010 - 0
|
|---|
| 70 | 178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0
|
|---|
| 71 | 192 Power-Off_Retract_Count PO--CK 100 100 010 - 0
|
|---|
| 72 | 194 Temperature_Celsius PO--CK 100 100 010 - 43
|
|---|
| 73 | 195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0
|
|---|
| 74 | 199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0
|
|---|
| 75 | 241 Total_LBAs_Written PO--CK 100 100 010 - 0
|
|---|
| 76 | 242 Total_LBAs_Read PO--CK 100 100 010 - 69
|
|---|
| 77 | 243 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 78 | 244 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 79 | 245 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 80 | 246 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 81 | 250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0
|
|---|
| 82 | 251 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 83 | 252 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 84 | 253 Unknown_Attribute PO--CK 100 100 010 - 0
|
|---|
| 85 | 254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0
|
|---|
| 86 | ||||||_ K auto-keep
|
|---|
| 87 | |||||__ C event count
|
|---|
| 88 | ||||___ R error rate
|
|---|
| 89 | |||____ S speed/performance
|
|---|
| 90 | ||_____ O updated online
|
|---|
| 91 | |______ P prefailure warning
|
|---|
| 92 |
|
|---|
| 93 | General Purpose Log Directory Version 1
|
|---|
| 94 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 95 | Address Access R/W Size Description
|
|---|
| 96 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 97 | 0x10 GPL,SL R/O 1 NCQ Command Error log
|
|---|
| 98 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 99 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 100 |
|
|---|
| 101 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|---|
| 102 |
|
|---|
| 103 | SMART Error Log not supported
|
|---|
| 104 |
|
|---|
| 105 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
|---|
| 106 |
|
|---|
| 107 | SMART Self-test Log not supported
|
|---|
| 108 |
|
|---|
| 109 | Selective Self-tests/Logging not supported
|
|---|
| 110 |
|
|---|
| 111 | SCT Commands not supported
|
|---|
| 112 |
|
|---|
| 113 | Device Statistics (GP Log 0x04) not supported
|
|---|
| 114 |
|
|---|
| 115 | SATA Phy Event Counters (GP Log 0x11) not supported
|
|---|
| 116 |
|
|---|
