| 1 | smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.9.0-0.bpo.3-amd64] (local build)
|
|---|
| 2 | Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: MXSSD3MDSF-60G
|
|---|
| 6 | Firmware Version: 2.32
|
|---|
| 7 | User Capacity: 64.023.257.088 bytes [64,0 GB]
|
|---|
| 8 | Sector Size: 512 bytes logical/physical
|
|---|
| 9 | Rotation Rate: Solid State Device
|
|---|
| 10 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 11 | ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
|
|---|
| 12 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 13 | Local Time is: Wed Aug 9 19:15:19 2017 CEST
|
|---|
| 14 | SMART support is: Available - device has SMART capability.
|
|---|
| 15 | SMART support is: Enabled
|
|---|
| 16 | AAM feature is: Unavailable
|
|---|
| 17 | APM level is: 254 (maximum performance)
|
|---|
| 18 | Rd look-ahead is: Disabled
|
|---|
| 19 | Write cache is: Enabled
|
|---|
| 20 | ATA Security is: Disabled, frozen [SEC2]
|
|---|
| 21 | Wt Cache Reorder: Unavailable
|
|---|
| 22 |
|
|---|
| 23 | === START OF READ SMART DATA SECTION ===
|
|---|
| 24 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 25 | See vendor-specific Attribute list for marginal Attributes.
|
|---|
| 26 |
|
|---|
| 27 | General SMART Values:
|
|---|
| 28 | Offline data collection status: (0x02) Offline data collection activity
|
|---|
| 29 | was completed without error.
|
|---|
| 30 | Auto Offline Data Collection: Disabled.
|
|---|
| 31 | Self-test execution status: ( 1) The previous self-test routine completed
|
|---|
| 32 | without error or no self-test has ever
|
|---|
| 33 | been run.
|
|---|
| 34 | Total time to complete Offline
|
|---|
| 35 | data collection: ( 781) seconds.
|
|---|
| 36 | Offline data collection
|
|---|
| 37 | capabilities: (0x7f) SMART execute Offline immediate.
|
|---|
| 38 | Auto Offline data collection on/off support.
|
|---|
| 39 | Abort Offline collection upon new
|
|---|
| 40 | command.
|
|---|
| 41 | Offline surface scan supported.
|
|---|
| 42 | Self-test supported.
|
|---|
| 43 | Conveyance Self-test supported.
|
|---|
| 44 | Selective Self-test supported.
|
|---|
| 45 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 46 | power-saving mode.
|
|---|
| 47 | Supports SMART auto save timer.
|
|---|
| 48 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 49 | General Purpose Logging supported.
|
|---|
| 50 | Short self-test routine
|
|---|
| 51 | recommended polling time: ( 1) minutes.
|
|---|
| 52 | Extended self-test routine
|
|---|
| 53 | recommended polling time: ( 48) minutes.
|
|---|
| 54 | Conveyance self-test routine
|
|---|
| 55 | recommended polling time: ( 2) minutes.
|
|---|
| 56 | SCT capabilities: (0x0021) SCT Status supported.
|
|---|
| 57 | SCT Data Table supported.
|
|---|
| 58 |
|
|---|
| 59 | SMART Attributes Data Structure revision number: 10
|
|---|
| 60 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 62 | 1 Raw_Read_Error_Rate POSR-- 090 090 050 - 91637489
|
|---|
| 63 | 5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0
|
|---|
| 64 | 9 Power_On_Hours -O--CK 093 093 000 - 6622 (162 90 0)
|
|---|
| 65 | 12 Power_Cycle_Count -O--CK 098 098 000 - 2274
|
|---|
| 66 | 171 Unknown_Attribute -O--CK 000 000 000 - 0
|
|---|
| 67 | 172 Unknown_Attribute -O--CK 000 000 000 - 0
|
|---|
| 68 | 174 Unknown_Attribute ----CK 000 000 000 - 76
|
|---|
| 69 | 177 Wear_Leveling_Count ------ 000 000 000 - 6
|
|---|
| 70 | 181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 0
|
|---|
| 71 | 182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0
|
|---|
| 72 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|---|
| 73 | 194 Temperature_Celsius -O---K 128 129 000 - 128 (0 127 0 129 0)
|
|---|
| 74 | 195 Hardware_ECC_Recovered --SRC- 120 120 000 - 91637489
|
|---|
| 75 | 196 Reallocated_Event_Count PO--CK 100 100 003 - 0
|
|---|
| 76 | 201 Unknown_SSD_Attribute --SRC- 120 120 000 - 91637489
|
|---|
| 77 | 204 Soft_ECC_Correction --SRC- 120 120 000 - 91637489
|
|---|
| 78 | 230 Unknown_SSD_Attribute PO--C- 100 100 000 - 249898377150564
|
|---|
| 79 | 231 Temperature_Celsius PO--C- 000 000 010 NOW 1
|
|---|
| 80 | 233 Media_Wearout_Indicator ------ 000 000 000 - 3621
|
|---|
| 81 | 234 Unknown_Attribute -O--CK 000 000 000 - 3196
|
|---|
| 82 | 241 Total_LBAs_Written -O--CK 000 000 000 - 3196
|
|---|
| 83 | 242 Total_LBAs_Read -O--CK 000 000 000 - 7706
|
|---|
| 84 | ||||||_ K auto-keep
|
|---|
| 85 | |||||__ C event count
|
|---|
| 86 | ||||___ R error rate
|
|---|
| 87 | |||____ S speed/performance
|
|---|
| 88 | ||_____ O updated online
|
|---|
| 89 | |______ P prefailure warning
|
|---|
| 90 |
|
|---|
| 91 | General Purpose Log Directory Version 1
|
|---|
| 92 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 93 | Address Access R/W Size Description
|
|---|
| 94 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 95 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 96 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 97 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
|---|
| 98 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
|---|
| 99 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 100 | 0xb7 GPL,SL VS 16 Device vendor specific log
|
|---|
| 101 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 102 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 103 |
|
|---|
| 104 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|---|
| 105 |
|
|---|
| 106 | SMART Error Log not supported
|
|---|
| 107 |
|
|---|
| 108 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 109 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 110 | # 1 Short offline Completed without error 10% 6622 -
|
|---|
| 111 |
|
|---|
| 112 | SMART Selective self-test log data structure revision number 1
|
|---|
| 113 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 114 | 1 0 0 Not_testing
|
|---|
| 115 | 2 0 0 Not_testing
|
|---|
| 116 | 3 0 0 Not_testing
|
|---|
| 117 | 4 0 0 Not_testing
|
|---|
| 118 | 5 0 0 Not_testing
|
|---|
| 119 | Selective self-test flags (0x0):
|
|---|
| 120 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 121 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 122 |
|
|---|
| 123 | SCT Status Version: 3
|
|---|
| 124 | SCT Version (vendor specific): 0 (0x0000)
|
|---|
| 125 | SCT Support Level: 1
|
|---|
| 126 | Device State: Active (0)
|
|---|
| 127 | Current Temperature: ? Celsius
|
|---|
| 128 | Power Cycle Min/Max Temperature: ?/ ? Celsius
|
|---|
| 129 | Lifetime Min/Max Temperature: ?/ ? Celsius
|
|---|
| 130 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 131 |
|
|---|
| 132 | SCT Temperature History Version: 2
|
|---|
| 133 | Temperature Sampling Period: 1 minute
|
|---|
| 134 | Temperature Logging Interval: 1 minute
|
|---|
| 135 | Min/Max recommended Temperature: ?/ ? Celsius
|
|---|
| 136 | Min/Max Temperature Limit: ?/ ? Celsius
|
|---|
| 137 | Temperature History Size (Index): 478 (1)
|
|---|
| 138 |
|
|---|
| 139 | Index Estimated Time Temperature Celsius
|
|---|
| 140 | 2 2017-08-09 11:18 ? -
|
|---|
| 141 | ... ..(476 skipped). .. -
|
|---|
| 142 | 1 2017-08-09 19:15 ? -
|
|---|
| 143 |
|
|---|
| 144 | SCT Error Recovery Control command not supported
|
|---|
| 145 |
|
|---|
| 146 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 147 |
|
|---|
| 148 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 149 | ID Size Value Description
|
|---|
| 150 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 151 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 152 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 153 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 154 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 155 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 156 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 157 | 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 158 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 159 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 160 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 161 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 162 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 163 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 164 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 165 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 166 |
|
|---|
