1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-58-generic] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: SAMSUNG SSD PM830 2.5" 7mm 128GB
|
---|
6 | Serial Number: S0TYNSACC22279
|
---|
7 | LU WWN Device Id: 5 002538 043584d30
|
---|
8 | Firmware Version: CXM03D1Q
|
---|
9 | User Capacity: 128.035.676.160 bytes [128 GB]
|
---|
10 | Sector Size: 512 bytes logical/physical
|
---|
11 | Rotation Rate: Solid State Device
|
---|
12 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
13 | ATA Version is: ATA8-ACS T13/1699-D revision 4c
|
---|
14 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
|
---|
15 | Local Time is: Wed Jul 12 14:29:45 2017 CEST
|
---|
16 | SMART support is: Available - device has SMART capability.
|
---|
17 | SMART support is: Enabled
|
---|
18 | AAM feature is: Disabled
|
---|
19 | APM feature is: Unavailable
|
---|
20 | Rd look-ahead is: Enabled
|
---|
21 | Write cache is: Enabled
|
---|
22 | ATA Security is: Disabled, frozen [SEC2]
|
---|
23 | Wt Cache Reorder: Unavailable
|
---|
24 |
|
---|
25 | === START OF READ SMART DATA SECTION ===
|
---|
26 | SMART overall-health self-assessment test result: PASSED
|
---|
27 |
|
---|
28 | General SMART Values:
|
---|
29 | Offline data collection status: (0x00) Offline data collection activity
|
---|
30 | was never started.
|
---|
31 | Auto Offline Data Collection: Disabled.
|
---|
32 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
33 | without error or no self-test has ever
|
---|
34 | been run.
|
---|
35 | Total time to complete Offline
|
---|
36 | data collection: ( 540) seconds.
|
---|
37 | Offline data collection
|
---|
38 | capabilities: (0x53) SMART execute Offline immediate.
|
---|
39 | Auto Offline data collection on/off support.
|
---|
40 | Suspend Offline collection upon new
|
---|
41 | command.
|
---|
42 | No Offline surface scan supported.
|
---|
43 | Self-test supported.
|
---|
44 | No Conveyance Self-test supported.
|
---|
45 | Selective Self-test supported.
|
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
47 | power-saving mode.
|
---|
48 | Supports SMART auto save timer.
|
---|
49 | Error logging capability: (0x01) Error logging supported.
|
---|
50 | General Purpose Logging supported.
|
---|
51 | Short self-test routine
|
---|
52 | recommended polling time: ( 2) minutes.
|
---|
53 | Extended self-test routine
|
---|
54 | recommended polling time: ( 9) minutes.
|
---|
55 |
|
---|
56 | SMART Attributes Data Structure revision number: 1
|
---|
57 | Vendor Specific SMART Attributes with Thresholds:
|
---|
58 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
59 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
---|
60 | 9 Power_On_Hours -O--CK 099 099 000 - 2519
|
---|
61 | 12 Power_Cycle_Count -O--CK 098 098 000 - 1145
|
---|
62 | 175 Program_Fail_Count_Chip -O--CK 100 100 010 - 0
|
---|
63 | 176 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0
|
---|
64 | 177 Wear_Leveling_Count PO--C- 096 096 010 - 141
|
---|
65 | 178 Used_Rsvd_Blk_Cnt_Chip PO--C- 092 092 010 - 162
|
---|
66 | 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 093 093 010 - 268
|
---|
67 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 093 093 010 - 3764
|
---|
68 | 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
|
---|
69 | 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
|
---|
70 | 183 Runtime_Bad_Block PO--C- 100 100 010 - 0
|
---|
71 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
---|
72 | 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0
|
---|
73 | 198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
---|
74 | 199 UDMA_CRC_Error_Count -OSRCK 253 253 000 - 67
|
---|
75 | 232 Available_Reservd_Space PO--C- 092 092 000 - 1854
|
---|
76 | 241 Total_LBAs_Written -O--CK 099 099 000 - 6742965903
|
---|
77 | 242 Total_LBAs_Read -O--CK 099 099 000 - 5973059191
|
---|
78 | ||||||_ K auto-keep
|
---|
79 | |||||__ C event count
|
---|
80 | ||||___ R error rate
|
---|
81 | |||____ S speed/performance
|
---|
82 | ||_____ O updated online
|
---|
83 | |______ P prefailure warning
|
---|
84 |
|
---|
85 | General Purpose Log Directory Version 1
|
---|
86 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
87 | Address Access R/W Size Description
|
---|
88 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
89 | 0x01 GPL,SL R/O 1 Summary SMART error log
|
---|
90 | 0x02 GPL,SL R/O 2 Comprehensive SMART error log
|
---|
91 | 0x03 GPL,SL R/O 2 Ext. Comprehensive SMART error log
|
---|
92 | 0x06 GPL,SL R/O 1 SMART self-test log
|
---|
93 | 0x07 GPL,SL R/O 2 Extended self-test log
|
---|
94 | 0x09 GPL,SL R/W 1 Selective self-test log
|
---|
95 | 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log
|
---|
96 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
---|
97 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
98 |
|
---|
99 | SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
---|
100 | No Errors Logged
|
---|
101 |
|
---|
102 | SMART Extended Self-test Log Version: 1 (2 sectors)
|
---|
103 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
104 | # 1 Short offline Completed without error 00% 2519 -
|
---|
105 | # 2 Extended offline Completed without error 00% 2515 -
|
---|
106 | # 3 Extended offline Aborted by host 10% 2515 -
|
---|
107 | # 4 Short offline Completed without error 00% 2506 -
|
---|
108 | # 5 Short offline Completed without error 00% 2503 -
|
---|
109 | # 6 Short offline Completed without error 00% 0 -
|
---|
110 |
|
---|
111 | SMART Selective self-test log data structure revision number 1
|
---|
112 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
113 | 1 0 0 Not_testing
|
---|
114 | 2 0 0 Not_testing
|
---|
115 | 3 0 0 Not_testing
|
---|
116 | 4 0 0 Not_testing
|
---|
117 | 5 0 0 Not_testing
|
---|
118 | Selective self-test flags (0x0):
|
---|
119 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
120 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
121 |
|
---|
122 | SCT Commands not supported
|
---|
123 |
|
---|
124 | Device Statistics (GP/SMART Log 0x04) not supported
|
---|
125 |
|
---|
126 | SATA Phy Event Counters (GP Log 0x11)
|
---|
127 | ID Size Value Description
|
---|
128 | 0x0001 2 67 Command failed due to ICRC error
|
---|
129 | 0x0002 2 49152 R_ERR response for data FIS
|
---|
130 | 0x0003 2 53248 R_ERR response for device-to-host data FIS
|
---|
131 | 0x0004 2 57344 R_ERR response for host-to-device data FIS
|
---|
132 | 0x0005 2 7952 R_ERR response for non-data FIS
|
---|
133 | 0x0006 2 2562 R_ERR response for device-to-host non-data FIS
|
---|
134 | 0x0007 2 4096 R_ERR response for host-to-device non-data FIS
|
---|
135 | 0x0008 2 7952 Device-to-host non-data FIS retries
|
---|
136 | 0x0009 2 7953 Transition from drive PhyRdy to drive PhyNRdy
|
---|
137 | 0x000a 2 3301 Device-to-host register FISes sent due to a COMRESET
|
---|
138 | 0x000b 2 6145 CRC errors within host-to-device FIS
|
---|
139 | 0x000d 2 7953 Non-CRC errors within host-to-device FIS
|
---|
140 | 0x000f 2 8176 R_ERR response for host-to-device data FIS, CRC
|
---|
141 | 0x0010 2 15 R_ERR response for host-to-device data FIS, non-CRC
|
---|
142 | 0x0012 2 49153 R_ERR response for host-to-device non-data FIS, CRC
|
---|
143 | 0x0013 2 12112 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
144 |
|
---|