| 1 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: PNY CS1311 120GB SSD
|
|---|
| 6 | Serial Number:
|
|---|
| 7 | LU WWN Device Id:
|
|---|
| 8 | Firmware Version: CS131122
|
|---|
| 9 | User Capacity: 120,034,123,776 bytes [120 GB]
|
|---|
| 10 | Sector Size: 512 bytes logical/physical
|
|---|
| 11 | Rotation Rate: Solid State Device
|
|---|
| 12 | Form Factor: 2.5 inches
|
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 14 | ATA Version is: ACS-2 (minor revision not indicated)
|
|---|
| 15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
|---|
| 16 | Local Time is: Sun Sep 24 12:06:25 2017 EDT
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 | AAM feature is: Unavailable
|
|---|
| 20 | APM level is: 254 (maximum performance)
|
|---|
| 21 | Rd look-ahead is: Enabled
|
|---|
| 22 | Write cache is: Enabled
|
|---|
| 23 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 24 | Wt Cache Reorder: Unavailable
|
|---|
| 25 |
|
|---|
| 26 | === START OF READ SMART DATA SECTION ===
|
|---|
| 27 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 28 |
|
|---|
| 29 | General SMART Values:
|
|---|
| 30 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 31 | was never started.
|
|---|
| 32 | Auto Offline Data Collection: Disabled.
|
|---|
| 33 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 34 | without error or no self-test has ever
|
|---|
| 35 | been run.
|
|---|
| 36 | Total time to complete Offline
|
|---|
| 37 | data collection: ( 30) seconds.
|
|---|
| 38 | Offline data collection
|
|---|
| 39 | capabilities: (0x79) SMART execute Offline immediate.
|
|---|
| 40 | No Auto Offline data collection support.
|
|---|
| 41 | Suspend Offline collection upon new
|
|---|
| 42 | command.
|
|---|
| 43 | Offline surface scan supported.
|
|---|
| 44 | Self-test supported.
|
|---|
| 45 | Conveyance Self-test supported.
|
|---|
| 46 | Selective Self-test supported.
|
|---|
| 47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 48 | power-saving mode.
|
|---|
| 49 | Supports SMART auto save timer.
|
|---|
| 50 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 51 | General Purpose Logging supported.
|
|---|
| 52 | Short self-test routine
|
|---|
| 53 | recommended polling time: ( 1) minutes.
|
|---|
| 54 | Extended self-test routine
|
|---|
| 55 | recommended polling time: ( 2) minutes.
|
|---|
| 56 | Conveyance self-test routine
|
|---|
| 57 | recommended polling time: ( 3) minutes.
|
|---|
| 58 |
|
|---|
| 59 | SMART Attributes Data Structure revision number: 16
|
|---|
| 60 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 62 | 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
|---|
| 63 | 9 Power_On_Hours -O--C- 100 100 000 - 4365
|
|---|
| 64 | 12 Power_Cycle_Count -O--C- 100 100 000 - 17
|
|---|
| 65 | 168 Unknown_Attribute -O--C- 100 100 000 - 0
|
|---|
| 66 | 170 Unknown_Attribute PO---- 100 100 010 - 233
|
|---|
| 67 | 173 Unknown_Attribute -O--C- 100 100 000 - 1507377
|
|---|
| 68 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 11
|
|---|
| 69 | 194 Temperature_Celsius PO---K 098 098 057 - 30 (Min/Max 30/30)
|
|---|
| 70 | 218 Unknown_Attribute PO-R-- 100 100 050 - 0
|
|---|
| 71 | 231 Temperature_Celsius PO--C- 100 100 000 - 98
|
|---|
| 72 | 241 Total_LBAs_Written -O--C- 100 100 000 - 3623
|
|---|
| 73 | ||||||_ K auto-keep
|
|---|
| 74 | |||||__ C event count
|
|---|
| 75 | ||||___ R error rate
|
|---|
| 76 | |||____ S speed/performance
|
|---|
| 77 | ||_____ O updated online
|
|---|
| 78 | |______ P prefailure warning
|
|---|
| 79 |
|
|---|
| 80 | General Purpose Log Directory Version 1
|
|---|
| 81 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 82 | Address Access R/W Size Description
|
|---|
| 83 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 84 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 85 | 0x02 SL R/O 51 Comprehensive SMART error log
|
|---|
| 86 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
|---|
| 87 | 0x04 GPL,SL R/O 8 Device Statistics log
|
|---|
| 88 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 89 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 90 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 91 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
|---|
| 92 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 93 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 94 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 95 |
|
|---|
| 96 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
|---|
| 97 | No Errors Logged
|
|---|
| 98 |
|
|---|
| 99 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 100 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 101 | # 1 Short offline Completed without error 00% 4365 -
|
|---|
| 102 |
|
|---|
| 103 | SMART Selective self-test log data structure revision number 1
|
|---|
| 104 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 105 | 1 0 0 Not_testing
|
|---|
| 106 | 2 0 0 Not_testing
|
|---|
| 107 | 3 0 0 Not_testing
|
|---|
| 108 | 4 0 0 Not_testing
|
|---|
| 109 | 5 0 0 Not_testing
|
|---|
| 110 | Selective self-test flags (0x0):
|
|---|
| 111 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 112 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 113 |
|
|---|
| 114 | SCT Commands not supported
|
|---|
| 115 |
|
|---|
| 116 | Device Statistics (GP Log 0x04)
|
|---|
| 117 | Page Offset Size Value Flags Description
|
|---|
| 118 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
|---|
| 119 | 0x01 0x008 4 17 --- Lifetime Power-On Resets
|
|---|
| 120 | 0x01 0x010 4 4365 --- Power-on Hours
|
|---|
| 121 | 0x01 0x018 6 7599785891 --- Logical Sectors Written
|
|---|
| 122 | 0x01 0x020 6 364788579 --- Number of Write Commands
|
|---|
| 123 | 0x01 0x028 6 3550605412 --- Logical Sectors Read
|
|---|
| 124 | 0x01 0x030 6 66349515 --- Number of Read Commands
|
|---|
| 125 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|---|
| 126 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|---|
| 127 | 0x04 0x010 4 49 --- Resets Between Cmd Acceptance and Completion
|
|---|
| 128 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|---|
| 129 | 0x05 0x008 1 32 --- Current Temperature
|
|---|
| 130 | 0x05 0x010 1 32 --- Average Short Term Temperature
|
|---|
| 131 | 0x05 0x018 1 32 --- Average Long Term Temperature
|
|---|
| 132 | 0x05 0x020 1 50 --- Highest Temperature
|
|---|
| 133 | 0x05 0x028 1 5 --- Lowest Temperature
|
|---|
| 134 | 0x05 0x030 1 50 --- Highest Average Short Term Temperature
|
|---|
| 135 | 0x05 0x038 1 16 --- Lowest Average Short Term Temperature
|
|---|
| 136 | 0x05 0x040 1 50 --- Highest Average Long Term Temperature
|
|---|
| 137 | 0x05 0x048 1 16 --- Lowest Average Long Term Temperature
|
|---|
| 138 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
|---|
| 139 | 0x05 0x058 1 50 --- Specified Maximum Operating Temperature
|
|---|
| 140 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
|---|
| 141 | 0x05 0x068 1 5 --- Specified Minimum Operating Temperature
|
|---|
| 142 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|---|
| 143 | 0x06 0x008 4 308 --- Number of Hardware Resets
|
|---|
| 144 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|---|
| 145 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|---|
| 146 | 0x07 0x008 1 4 --- Percentage Used Endurance Indicator
|
|---|
| 147 | |||_ C monitored condition met
|
|---|
| 148 | ||__ D supports DSN
|
|---|
| 149 | |___ N normalized value
|
|---|
| 150 |
|
|---|
| 151 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 152 | ID Size Value Description
|
|---|
| 153 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 154 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 155 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 156 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 157 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 158 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 159 | 0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 160 | 0x000a 4 15 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 161 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 162 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 163 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 164 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 165 |
|
|---|
