| 1 | smartctl 6.6 2017-09-20 r4440 [x86_64-linux-4.9.0-0.bpo.3-amd64] (daily-20170920)
|
|---|
| 2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: TOSHIBA MK1032GSX
|
|---|
| 6 | Firmware Version: AS021G
|
|---|
| 7 | User Capacity: 100,030,242,816 bytes [100 GB]
|
|---|
| 8 | Sector Size: 512 bytes logical/physical
|
|---|
| 9 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 10 | ATA Version is: ATA/ATAPI-6 (minor revision not indicated)
|
|---|
| 11 | Local Time is: Sat Sep 23 18:20:13 2017 CEST
|
|---|
| 12 | SMART support is: Available - device has SMART capability.
|
|---|
| 13 | SMART support is: Enabled
|
|---|
| 14 | AAM feature is: Unavailable
|
|---|
| 15 | APM level is: 128 (minimum power consumption without standby)
|
|---|
| 16 | Rd look-ahead is: Enabled
|
|---|
| 17 | Write cache is: Enabled
|
|---|
| 18 | DSN feature is: Unavailable
|
|---|
| 19 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 20 | Wt Cache Reorder: Unavailable
|
|---|
| 21 |
|
|---|
| 22 | === START OF READ SMART DATA SECTION ===
|
|---|
| 23 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 24 |
|
|---|
| 25 | General SMART Values:
|
|---|
| 26 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 27 | was never started.
|
|---|
| 28 | Auto Offline Data Collection: Disabled.
|
|---|
| 29 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 30 | without error or no self-test has ever
|
|---|
| 31 | been run.
|
|---|
| 32 | Total time to complete Offline
|
|---|
| 33 | data collection: ( 384) seconds.
|
|---|
| 34 | Offline data collection
|
|---|
| 35 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 36 | Auto Offline data collection on/off support.
|
|---|
| 37 | Suspend Offline collection upon new
|
|---|
| 38 | command.
|
|---|
| 39 | Offline surface scan supported.
|
|---|
| 40 | Self-test supported.
|
|---|
| 41 | No Conveyance Self-test supported.
|
|---|
| 42 | Selective Self-test supported.
|
|---|
| 43 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 44 | power-saving mode.
|
|---|
| 45 | Supports SMART auto save timer.
|
|---|
| 46 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 47 | General Purpose Logging supported.
|
|---|
| 48 | Short self-test routine
|
|---|
| 49 | recommended polling time: ( 2) minutes.
|
|---|
| 50 | Extended self-test routine
|
|---|
| 51 | recommended polling time: ( 76) minutes.
|
|---|
| 52 |
|
|---|
| 53 | SMART Attributes Data Structure revision number: 16
|
|---|
| 54 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 55 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 56 | 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
|---|
| 57 | 2 Throughput_Performance P-S--- 100 100 050 - 0
|
|---|
| 58 | 3 Spin_Up_Time POS--K 100 100 001 - 1941
|
|---|
| 59 | 4 Start_Stop_Count -O--CK 100 100 000 - 1266
|
|---|
| 60 | 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
|
|---|
| 61 | 7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
|---|
| 62 | 8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
|---|
| 63 | 9 Power_On_Hours -O--CK 072 072 000 - 11360
|
|---|
| 64 | 10 Spin_Retry_Count PO--CK 125 100 030 - 0
|
|---|
| 65 | 12 Power_Cycle_Count -O--CK 100 100 000 - 1260
|
|---|
| 66 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 156
|
|---|
| 67 | 193 Load_Cycle_Count -O--CK 068 068 000 - 325735
|
|---|
| 68 | 194 Temperature_Celsius -O---K 100 100 000 - 30 (Min/Max 5/57)
|
|---|
| 69 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|---|
| 70 | 197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
|---|
| 71 | 198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
|---|
| 72 | 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0
|
|---|
| 73 | 220 Disk_Shift -O---- 100 100 000 - 250
|
|---|
| 74 | 222 Loaded_Hours -O--CK 078 078 000 - 9086
|
|---|
| 75 | 223 Load_Retry_Count -O--CK 100 100 000 - 0
|
|---|
| 76 | 224 Load_Friction -O---K 100 100 000 - 0
|
|---|
| 77 | 226 Load-in_Time -OS--K 100 100 000 - 323
|
|---|
| 78 | 240 Head_Flying_Hours P----- 100 100 001 - 0
|
|---|
| 79 | ||||||_ K auto-keep
|
|---|
| 80 | |||||__ C event count
|
|---|
| 81 | ||||___ R error rate
|
|---|
| 82 | |||____ S speed/performance
|
|---|
| 83 | ||_____ O updated online
|
|---|
| 84 | |______ P prefailure warning
|
|---|
| 85 |
|
|---|
| 86 | General Purpose Log Directory Version 1
|
|---|
| 87 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 88 | Address Access R/W Size Description
|
|---|
| 89 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 90 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 91 | 0x02 SL R/O 51 Comprehensive SMART error log
|
|---|
| 92 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
|---|
| 93 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 94 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 95 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 96 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 97 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 98 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 99 |
|
|---|
| 100 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
|---|
| 101 | Device Error Count: 3
|
|---|
| 102 | CR = Command Register
|
|---|
| 103 | FEATR = Features Register
|
|---|
| 104 | COUNT = Count (was: Sector Count) Register
|
|---|
| 105 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|---|
| 106 | LH = LBA High (was: Cylinder High) Register ] LBA
|
|---|
| 107 | LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|---|
| 108 | LL = LBA Low (was: Sector Number) Register ]
|
|---|
| 109 | DV = Device (was: Device/Head) Register
|
|---|
| 110 | DC = Device Control Register
|
|---|
| 111 | ER = Error register
|
|---|
| 112 | ST = Status register
|
|---|
| 113 | Powered_Up_Time is measured from power on, and printed as
|
|---|
| 114 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|---|
| 115 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|---|
| 116 |
|
|---|
| 117 | Error 3 [2] occurred at disk power-on lifetime: 11194 hours (466 days + 10 hours)
|
|---|
| 118 | When the command that caused the error occurred, the device was active or idle.
|
|---|
| 119 |
|
|---|
| 120 | After command completion occurred, registers were:
|
|---|
| 121 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|---|
| 122 | -- -- -- == -- == == == -- -- -- -- --
|
|---|
| 123 | 84 -- 41 00 9a 00 00 00 b3 03 00 40 00 Error: ICRC, ABRT at LBA = 0x00b30300 = 11731712
|
|---|
| 124 |
|
|---|
| 125 | Commands leading to the command that caused the error were:
|
|---|
| 126 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|---|
| 127 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|---|
| 128 | 60 00 08 00 a0 00 00 00 b3 03 d2 40 00 10:08:07.412 READ FPDMA QUEUED
|
|---|
| 129 | 60 00 d2 00 98 00 00 00 b3 03 00 40 00 10:08:07.412 READ FPDMA QUEUED
|
|---|
| 130 | 60 00 3e 00 90 00 00 00 bc 90 c2 40 00 10:08:07.409 READ FPDMA QUEUED
|
|---|
| 131 | 60 00 08 00 88 00 00 00 bc 90 ba 40 00 10:08:07.395 READ FPDMA QUEUED
|
|---|
| 132 | 60 00 ba 00 80 00 00 00 bc 90 00 40 00 10:08:07.395 READ FPDMA QUEUED
|
|---|
| 133 |
|
|---|
| 134 | Error 2 [1] occurred at disk power-on lifetime: 5844 hours (243 days + 12 hours)
|
|---|
| 135 | When the command that caused the error occurred, the device was active or idle.
|
|---|
| 136 |
|
|---|
| 137 | After command completion occurred, registers were:
|
|---|
| 138 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|---|
| 139 | -- -- -- == -- == == == -- -- -- -- --
|
|---|
| 140 | 84 -- 51 00 01 2a 69 19 2a 69 39 41 00 Error: ICRC, ABRT at LBA = 0x2a69192a6939 = 46630882142521
|
|---|
| 141 |
|
|---|
| 142 | Commands leading to the command that caused the error were:
|
|---|
| 143 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|---|
| 144 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|---|
| 145 | ca 00 00 00 20 2a 69 19 2a 69 1a 41 00 09:03:32.962 WRITE DMA
|
|---|
| 146 | ca 00 00 00 1a 2a 68 ff 2a 69 00 41 00 09:03:32.961 WRITE DMA
|
|---|
| 147 | ca 00 00 00 26 2a 68 d9 2a 68 da 41 00 09:03:32.957 WRITE DMA
|
|---|
| 148 | ca 00 00 00 18 2a 68 c1 2a 68 c2 41 00 09:03:32.956 WRITE DMA
|
|---|
| 149 | ca 00 00 00 40 2a 68 81 2a 68 82 41 00 09:03:32.956 WRITE DMA
|
|---|
| 150 |
|
|---|
| 151 | Error 1 [0] occurred at disk power-on lifetime: 4595 hours (191 days + 11 hours)
|
|---|
| 152 | When the command that caused the error occurred, the device was active or idle.
|
|---|
| 153 |
|
|---|
| 154 | After command completion occurred, registers were:
|
|---|
| 155 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|---|
| 156 | -- -- -- == -- == == == -- -- -- -- --
|
|---|
| 157 | 84 -- 41 00 02 00 00 01 66 4e 02 41 00 Error: ICRC, ABRT at LBA = 0x01664e02 = 23481858
|
|---|
| 158 |
|
|---|
| 159 | Commands leading to the command that caused the error were:
|
|---|
| 160 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|---|
| 161 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|---|
| 162 | 60 00 80 00 00 00 00 01 66 4e 02 40 00 2d+20:21:51.054 READ FPDMA QUEUED
|
|---|
| 163 | 60 00 02 00 f8 00 00 01 66 4e 00 40 00 2d+20:21:51.048 READ FPDMA QUEUED
|
|---|
| 164 | 60 00 7e 00 f0 00 00 01 66 4d 82 40 00 2d+20:21:51.045 READ FPDMA QUEUED
|
|---|
| 165 | 60 00 80 00 e8 00 00 01 66 4d 02 40 00 2d+20:21:51.044 READ FPDMA QUEUED
|
|---|
| 166 | 60 00 02 00 e0 00 00 01 66 4d 00 40 00 2d+20:21:51.043 READ FPDMA QUEUED
|
|---|
| 167 |
|
|---|
| 168 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 169 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 170 | # 1 Short offline Completed without error 00% 11360 -
|
|---|
| 171 | # 2 Extended offline Completed without error 00% 11358 -
|
|---|
| 172 | # 3 Short captive Completed without error 00% 11357 -
|
|---|
| 173 |
|
|---|
| 174 | SMART Selective self-test log data structure revision number 1
|
|---|
| 175 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 176 | 1 0 0 Not_testing
|
|---|
| 177 | 2 0 0 Not_testing
|
|---|
| 178 | 3 0 0 Not_testing
|
|---|
| 179 | 4 0 0 Not_testing
|
|---|
| 180 | 5 0 0 Not_testing
|
|---|
| 181 | Selective self-test flags (0x0):
|
|---|
| 182 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 183 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 184 |
|
|---|
| 185 | SCT Commands not supported
|
|---|
| 186 |
|
|---|
| 187 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 188 |
|
|---|
| 189 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 190 | ID Size Value Description
|
|---|
| 191 | 0x0001 4 0 Command failed due to ICRC error
|
|---|
| 192 | 0x0002 4 0 R_ERR response for data FIS
|
|---|
| 193 | 0x0003 4 0 R_ERR response for device-to-host data FIS
|
|---|
| 194 | 0x0004 4 0 R_ERR response for host-to-device data FIS
|
|---|
| 195 | 0x0005 4 0 R_ERR response for non-data FIS
|
|---|
| 196 | 0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 197 | 0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 198 | 0x0008 4 0 Device-to-host non-data FIS retries
|
|---|
| 199 | 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 200 | 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 201 | 0x000b 4 0 CRC errors within host-to-device FIS
|
|---|
| 202 | 0x000d 4 0 Non-CRC errors within host-to-device FIS
|
|---|
| 203 | 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 204 | 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 205 | 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 206 | 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 207 |
|
|---|
