| 1 | smartctl 6.6 2017-08-08 r4433 [x86_64-w64-mingw32-win7-sp1] (daily-20170808)
|
|---|
| 2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Model Family: SKhynix SATA Client SC3xx Series
|
|---|
| 6 | Device Model: SKhynix SC300 HFS256G32MND-3210A
|
|---|
| 7 | Serial Number: FI57Q00391010761P
|
|---|
| 8 | LU WWN Device Id: 0 000000 000000000
|
|---|
| 9 | Firmware Version: 20131P00
|
|---|
| 10 | User Capacity: 256,060,514,304 bytes [256 GB]
|
|---|
| 11 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 12 | Rotation Rate: Solid State Device
|
|---|
| 13 | Form Factor: 2.5 inches
|
|---|
| 14 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 15 | ATA Version is: ACS-2 (minor revision not indicated)
|
|---|
| 16 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
|---|
| 17 | Local Time is: Mon Sep 18 10:02:40 2017 PDT
|
|---|
| 18 | SMART support is: Available - device has SMART capability.
|
|---|
| 19 | SMART support is: Enabled
|
|---|
| 20 |
|
|---|
| 21 | === START OF READ SMART DATA SECTION ===
|
|---|
| 22 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 23 |
|
|---|
| 24 | General SMART Values:
|
|---|
| 25 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 26 | was never started.
|
|---|
| 27 | Auto Offline Data Collection: Disabled.
|
|---|
| 28 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 29 | without error or no self-test has ever
|
|---|
| 30 | been run.
|
|---|
| 31 | Total time to complete Offline
|
|---|
| 32 | data collection: ( 0) seconds.
|
|---|
| 33 | Offline data collection
|
|---|
| 34 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 35 | Auto Offline data collection on/off support.
|
|---|
| 36 | Suspend Offline collection upon new
|
|---|
| 37 | command.
|
|---|
| 38 | Offline surface scan supported.
|
|---|
| 39 | Self-test supported.
|
|---|
| 40 | No Conveyance Self-test supported.
|
|---|
| 41 | Selective Self-test supported.
|
|---|
| 42 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 43 | power-saving mode.
|
|---|
| 44 | Supports SMART auto save timer.
|
|---|
| 45 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 46 | General Purpose Logging supported.
|
|---|
| 47 | Short self-test routine
|
|---|
| 48 | recommended polling time: ( 2) minutes.
|
|---|
| 49 | Extended self-test routine
|
|---|
| 50 | recommended polling time: ( 18) minutes.
|
|---|
| 51 | SCT capabilities: (0x0001) SCT Status supported.
|
|---|
| 52 |
|
|---|
| 53 | SMART Attributes Data Structure revision number: 4
|
|---|
| 54 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 55 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 56 | 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
|
|---|
| 57 | 5 Retired_Block_Count 0x0033 100 100 005 Pre-fail Always - 0
|
|---|
| 58 | 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 262
|
|---|
| 59 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6190
|
|---|
| 60 | 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 61 | 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 62 | 173 Wear_Leveling_Count 0x0032 100 100 005 Old_age Always - 27
|
|---|
| 63 | 174 Unexpect_Power_Loss_Cnt 0x0032 100 100 000 Old_age Always - 6183
|
|---|
| 64 | 176 Unused_Rsvd_Blk_Cnt_Tot 0x0022 100 100 000 Old_age Always - 4074
|
|---|
| 65 | 181 Non4k_Aligned_Access 0x0022 100 100 000 Old_age Always - 938983
|
|---|
| 66 | 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 3
|
|---|
| 67 | 184 End-to-End_Error 0x003b 100 100 097 Pre-fail Always - 0
|
|---|
| 68 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 69 | 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 70 | 194 Temperature_Celsius 0x0022 024 000 000 Old_age Always - 24 (Min/Max 0/36)
|
|---|
| 71 | 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
|
|---|
| 72 | 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 73 | 201 Percent_Lifetime_Remain 0x0023 100 100 005 Pre-fail Always - 0
|
|---|
| 74 | 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 129
|
|---|
| 75 | 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 76 | 243 Total_Media_Writes 0x0032 100 100 000 Old_age Always - 905
|
|---|
| 77 |
|
|---|
| 78 | SMART Error Log Version: 0
|
|---|
| 79 | No Errors Logged
|
|---|
| 80 |
|
|---|
| 81 | SMART Self-test log structure revision number 1
|
|---|
| 82 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 83 |
|
|---|
| 84 | Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
|---|
| 85 | SMART Selective self-test log data structure revision number 0
|
|---|
| 86 | Note: revision number not 1 implies that no selective self-test has ever been run
|
|---|
| 87 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 88 | 1 0 0 Not_testing
|
|---|
| 89 | 2 0 0 Not_testing
|
|---|
| 90 | 3 0 0 Not_testing
|
|---|
| 91 | 4 0 0 Not_testing
|
|---|
| 92 | 5 0 0 Not_testing
|
|---|
| 93 | Selective self-test flags (0x0):
|
|---|
| 94 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 95 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 96 |
|
|---|
