1 | smartctl 6.6 2017-08-08 r4433 [x86_64-w64-mingw32-win7-sp1] (daily-20170808)
|
---|
2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: SKhynix SATA Client SC308 Series
|
---|
6 | Device Model: HFS500G32TND-N1A2A
|
---|
7 | Serial Number: FI63Q046810104704
|
---|
8 | Firmware Version: 30000P10
|
---|
9 | User Capacity: 500,107,862,016 bytes [500 GB]
|
---|
10 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
11 | Rotation Rate: Solid State Device
|
---|
12 | Form Factor: 2.5 inches
|
---|
13 | Device is: In smartctl database [for details use: -P show]
|
---|
14 | ATA Version is: ACS-2 (minor revision not indicated)
|
---|
15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
---|
16 | Local Time is: Mon Sep 18 10:00:38 2017 PDT
|
---|
17 | SMART support is: Available - device has SMART capability.
|
---|
18 | SMART support is: Enabled
|
---|
19 |
|
---|
20 | === START OF READ SMART DATA SECTION ===
|
---|
21 | SMART overall-health self-assessment test result: PASSED
|
---|
22 |
|
---|
23 | General SMART Values:
|
---|
24 | Offline data collection status: (0x02) Offline data collection activity
|
---|
25 | was completed without error.
|
---|
26 | Auto Offline Data Collection: Disabled.
|
---|
27 | Self-test execution status: ( 36) The self-test routine was interrupted
|
---|
28 | by the host with a hard or soft reset.
|
---|
29 | Total time to complete Offline
|
---|
30 | data collection: ( 105) seconds.
|
---|
31 | Offline data collection
|
---|
32 | capabilities: (0x19) SMART execute Offline immediate.
|
---|
33 | No Auto Offline data collection support.
|
---|
34 | Suspend Offline collection upon new
|
---|
35 | command.
|
---|
36 | Offline surface scan supported.
|
---|
37 | Self-test supported.
|
---|
38 | No Conveyance Self-test supported.
|
---|
39 | No Selective Self-test supported.
|
---|
40 | SMART capabilities: (0x0002) Does not save SMART data before
|
---|
41 | entering power-saving mode.
|
---|
42 | Supports SMART auto save timer.
|
---|
43 | Error logging capability: (0x01) Error logging supported.
|
---|
44 | General Purpose Logging supported.
|
---|
45 | Short self-test routine
|
---|
46 | recommended polling time: ( 2) minutes.
|
---|
47 | Extended self-test routine
|
---|
48 | recommended polling time: ( 60) minutes.
|
---|
49 |
|
---|
50 | SMART Attributes Data Structure revision number: 0
|
---|
51 | Vendor Specific SMART Attributes with Thresholds:
|
---|
52 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
---|
53 | 1 Raw_Read_Error_Rate 0x000f 166 166 006 Pre-fail Always - 0
|
---|
54 | 5 Retired_Block_Count 0x0032 253 100 036 Old_age Always - 0
|
---|
55 | 9 Power_On_Hours 0x0032 253 100 000 Old_age Always - 0
|
---|
56 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 5
|
---|
57 | 100 Total_Erase_Count 0x0032 100 100 000 Old_age Always - 1054151
|
---|
58 | 168 Min_Erase_Count 0x0032 253 100 000 Old_age Always - 0
|
---|
59 | 169 Max_Erase_Count 0x0032 099 099 000 Old_age Always - 20
|
---|
60 | 171 Program_Fail_Count 0x0032 253 253 000 Old_age Always - 0
|
---|
61 | 172 Erase_Fail_Count 0x0032 253 253 000 Old_age Always - 0
|
---|
62 | 174 Unexpect_Power_Loss_Cnt 0x0030 253 100 000 Old_age Offline - 0
|
---|
63 | 175 Program_Fail_Count_Chip 0x0032 253 253 000 Old_age Always - 0
|
---|
64 | 176 Unused_Rsvd_Blk_Cnt_Tot 0x0032 253 253 000 Old_age Always - 0
|
---|
65 | 177 Wear_Leveling_Count 0x0032 253 100 000 Old_age Always - 0
|
---|
66 | 178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 000 Old_age Always - 33
|
---|
67 | 179 Used_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 502
|
---|
68 | 180 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 13386
|
---|
69 | 184 End-to-End_Error 0x0032 253 253 000 Old_age Always - 0
|
---|
70 | 187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always - 0
|
---|
71 | 188 Command_Timeout 0x0032 253 253 000 Old_age Always - 0
|
---|
72 | 194 Temperature_Celsius 0x0002 026 000 000 Old_age Always - 26 (Min/Max 22/29)
|
---|
73 | 195 Hardware_ECC_Recovered 0x0032 253 253 000 Old_age Always - 0
|
---|
74 | 196 Reallocated_Event_Count 0x0032 253 100 036 Old_age Always - 0
|
---|
75 | 198 Offline_Uncorrectable 0x0032 253 253 000 Old_age Always - 0
|
---|
76 | 199 UDMA_CRC_Error_Count 0x0032 253 253 000 Old_age Always - 0
|
---|
77 | 204 Soft_ECC_Correction 0x000e 100 100 000 Old_age Always - 0
|
---|
78 | 212 Phy_Error_Count 0x0032 253 253 000 Old_age Always - 0
|
---|
79 | 234 Unknown_Attribute 0x0032 253 100 000 Old_age Always - 0
|
---|
80 | 241 Total_LBAs_Written 0x0032 253 100 000 Old_age Always - 0
|
---|
81 | 242 Total_LBAs_Read 0x0032 253 100 000 Old_age Always - 0
|
---|
82 | 250 NAND_Reads_Retry 0x0032 100 100 000 Old_age Always - 12
|
---|
83 |
|
---|
84 | SMART Error Log Version: 0
|
---|
85 | No Errors Logged
|
---|
86 |
|
---|
87 | SMART Self-test log structure revision number 1
|
---|
88 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
89 | # 1 Short offline Completed without error 00% 0 -
|
---|
90 | # 2 Short offline Completed without error 90% 7 -
|
---|
91 |
|
---|
92 | Selective Self-tests/Logging not supported
|
---|
93 |
|
---|