| 1 | Microsoft Windows [Version 6.1.7601] |
|---|
| 2 | Copyright (c) 2009 Microsoft Corporation. All rights reserved. |
|---|
| 3 | |
|---|
| 4 | C:\smartmon>smartctl.exe --scan |
|---|
| 5 | /dev/sdb -d scsi # /dev/sdb, SCSI device |
|---|
| 6 | /dev/sdc -d scsi # /dev/sdc, SCSI device |
|---|
| 7 | /dev/sdd -d ata # /dev/sdd, ATA device |
|---|
| 8 | |
|---|
| 9 | C:\smartmon>smartctl.exe -A /dev/sdb |
|---|
| 10 | smartctl 6.6 (build date Jun 28 2017) [x86_64-pc-msys-2008r2-sp1] (local build) |
|---|
| 11 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 12 | |
|---|
| 13 | === START OF READ SMART DATA SECTION === |
|---|
| 14 | Current Drive Temperature: 38 C |
|---|
| 15 | Drive Trip Temperature: 63 C |
|---|
| 16 | |
|---|
| 17 | Manufactured in week 39 of year 2014 |
|---|
| 18 | Specified cycle count over device lifetime: 0 |
|---|
| 19 | Accumulated start-stop cycles: 6398 |
|---|
| 20 | ID# ATTRIBUTE_NAME VALUE THRESH WORST |
|---|
| 21 | 1 Raw_Read_Err_Rate 2 200 6 |
|---|
| 22 | 2 Flash_ROM_Check 0 100 0 |
|---|
| 23 | 5 Reallocated_Blk_Ct 0 49912 0 |
|---|
| 24 | 9 Power_ON_Hours 3396 0 3396 |
|---|
| 25 | 12 Power_Cycle_Ct 6398 0 6398 |
|---|
| 26 | 13 ECC_Rate 32 65535 32 |
|---|
| 27 | 29 Pwr_Fail_Backup_Circuit 100 0 100 |
|---|
| 28 | 32 Avg_Write_Amplification 0 0 539 |
|---|
| 29 | 177 Drive_Life_Remain% 99 2 99 |
|---|
| 30 | 178 Drive_Life_Remain_x100 9853 200 9853 |
|---|
| 31 | 180 Unused_Reserved_Blk_Ct 47643 0 47643 |
|---|
| 32 | 181 Program_Fail_Ct 0 0 0 |
|---|
| 33 | 182 Erase_Fail_Ct 0 0 0 |
|---|
| 34 | 190 Drive_Temp_Warning 45 65 65 |
|---|
| 35 | 194 Drive_Temperature 45 70 65 |
|---|
| 36 | 195 UECC_Ct 0 0 0 |
|---|
| 37 | 198 Offline_Scan_UEC 0 0 0 |
|---|
| 38 | 233 Number_Of_LBA_Written 335479 0 335479 |
|---|
| 39 | 245 DriveLife_Used% 1 98 1 |
|---|
| 40 | 246 DriveLife_Used%x100 147 9800 147 |
|---|
| 41 | defect list format 6 unknown |
|---|
| 42 | Elements in grown defect list: 0 |
|---|
| 43 | |
|---|
| 44 | |
|---|
| 45 | C:\smartmon>smartctl.exe -x /dev/sdb |
|---|
| 46 | smartctl 6.6 (build date Jun 28 2017) [x86_64-pc-msys-2008r2-sp1] (local build) |
|---|
| 47 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 48 | |
|---|
| 49 | === START OF INFORMATION SECTION === |
|---|
| 50 | Vendor: SanDisk |
|---|
| 51 | Product: DOPE1920S5xnNMRI |
|---|
| 52 | Revision: P018 |
|---|
| 53 | Compliance: SPC-4 |
|---|
| 54 | User Capacity: 1,950,389,400,960 bytes [1.95 TB] |
|---|
| 55 | Logical block size: 520 bytes |
|---|
| 56 | Physical block size: 4160 bytes |
|---|
| 57 | LU is resource provisioned, LBPRZ=1 |
|---|
| 58 | Rotation Rate: Solid State Device |
|---|
| 59 | Form Factor: 2.5 inches |
|---|
| 60 | Logical Unit id: 0x5001173100309154 |
|---|
| 61 | Serial number: FG00F2HW |
|---|
| 62 | Device type: disk |
|---|
| 63 | Transport protocol: SAS (SPL-3) |
|---|
| 64 | Local Time is: Tue Oct 17 14:10:53 2017 IST |
|---|
| 65 | SMART support is: Available - device has SMART capability. |
|---|
| 66 | SMART support is: Enabled |
|---|
| 67 | Temperature Warning: Enabled |
|---|
| 68 | Read Cache is: Enabled |
|---|
| 69 | Writeback Cache is: Disabled |
|---|
| 70 | |
|---|
| 71 | === START OF READ SMART DATA SECTION === |
|---|
| 72 | SMART Health Status: OK |
|---|
| 73 | |
|---|
| 74 | Percentage used endurance indicator: 1% |
|---|
| 75 | Current Drive Temperature: 38 C |
|---|
| 76 | Drive Trip Temperature: 63 C |
|---|
| 77 | |
|---|
| 78 | Manufactured in week 39 of year 2014 |
|---|
| 79 | Specified cycle count over device lifetime: 0 |
|---|
| 80 | Accumulated start-stop cycles: 6398 |
|---|
| 81 | ID# ATTRIBUTE_NAME VALUE THRESH WORST |
|---|
| 82 | 1 Raw_Read_Err_Rate 2 200 6 |
|---|
| 83 | 2 Flash_ROM_Check 0 100 0 |
|---|
| 84 | 5 Reallocated_Blk_Ct 0 49912 0 |
|---|
| 85 | 9 Power_ON_Hours 3396 0 3396 |
|---|
| 86 | 12 Power_Cycle_Ct 6398 0 6398 |
|---|
| 87 | 13 ECC_Rate 32 65535 32 |
|---|
| 88 | 29 Pwr_Fail_Backup_Circuit 100 0 100 |
|---|
| 89 | 32 Avg_Write_Amplification 0 0 539 |
|---|
| 90 | 177 Drive_Life_Remain% 99 2 99 |
|---|
| 91 | 178 Drive_Life_Remain_x100 9853 200 9853 |
|---|
| 92 | 180 Unused_Reserved_Blk_Ct 47643 0 47643 |
|---|
| 93 | 181 Program_Fail_Ct 0 0 0 |
|---|
| 94 | 182 Erase_Fail_Ct 0 0 0 |
|---|
| 95 | 190 Drive_Temp_Warning 45 65 65 |
|---|
| 96 | 194 Drive_Temperature 45 70 65 |
|---|
| 97 | 195 UECC_Ct 0 0 0 |
|---|
| 98 | 198 Offline_Scan_UEC 0 0 0 |
|---|
| 99 | 233 Number_Of_LBA_Written 335479 0 335479 |
|---|
| 100 | 245 DriveLife_Used% 1 98 1 |
|---|
| 101 | 246 DriveLife_Used%x100 147 9800 147 |
|---|
| 102 | defect list format 6 unknown |
|---|
| 103 | Elements in grown defect list: 0 |
|---|
| 104 | |
|---|
| 105 | Error counter log: |
|---|
| 106 | Errors Corrected by Total Correction Gigabytes Total |
|---|
| 107 | ECC rereads/ errors algorithm processed uncorrected |
|---|
| 108 | fast | delayed rewrites corrected invocations [10^9 bytes] errors |
|---|
| 109 | read: 0 0 0 0 0 1.020 0 |
|---|
| 110 | write: 0 0 0 0 0 0.708 0 |
|---|
| 111 | verify: 0 0 0 0 0 2.430 0 |
|---|
| 112 | |
|---|
| 113 | Non-medium error count: 30781 |
|---|
| 114 | |
|---|
| 115 | No self-tests have been logged |
|---|
| 116 | |
|---|
| 117 | Background scan results log |
|---|
| 118 | Status: no scans active |
|---|
| 119 | Accumulated power on time, hours:minutes 3396:42 [203802 minutes] |
|---|
| 120 | Number of background scans performed: 0, scan progress: 0.00% |
|---|
| 121 | Number of background medium scans performed: 0 |
|---|
| 122 | |
|---|
| 123 | # when lba(hex) [sk,asc,ascq] reassign_status |
|---|
| 124 | 1 0:00 0000000000000000 [0,0,0] Reserved [0x0] |
|---|
| 125 | |
|---|
| 126 | Protocol Specific port log page for SAS SSP |
|---|
| 127 | relative target port id = 1 |
|---|
| 128 | generation code = 1 |
|---|
| 129 | number of phys = 1 |
|---|
| 130 | phy identifier = 0 |
|---|
| 131 | attached device type: SAS or SATA device |
|---|
| 132 | attached reason: loss of dword synchronization |
|---|
| 133 | reason: power on |
|---|
| 134 | negotiated logical link rate: phy enabled; 6 Gbps |
|---|
| 135 | attached initiator port: ssp=1 stp=1 smp=1 |
|---|
| 136 | attached target port: ssp=0 stp=0 smp=0 |
|---|
| 137 | SAS address = 0x5001173100309155 |
|---|
| 138 | attached SAS address = 0x500605b0091c3bf0 |
|---|
| 139 | attached phy identifier = 4 |
|---|
| 140 | Invalid DWORD count = 0 |
|---|
| 141 | Running disparity error count = 0 |
|---|
| 142 | Loss of DWORD synchronization = 0 |
|---|
| 143 | Phy reset problem = 0 |
|---|
| 144 | Phy event descriptors: |
|---|
| 145 | Invalid word count: 0 |
|---|
| 146 | Running disparity error count: 0 |
|---|
| 147 | Loss of dword synchronization count: 0 |
|---|
| 148 | Phy reset problem count: 0 |
|---|
| 149 | phy identifier = 0 |
|---|
| 150 | attached device type: no device attached |
|---|
| 151 | attached reason: unknown |
|---|
| 152 | reason: unknown |
|---|
| 153 | negotiated logical link rate: phy enabled; unknown |
|---|
| 154 | attached initiator port: ssp=0 stp=0 smp=0 |
|---|
| 155 | attached target port: ssp=0 stp=0 smp=0 |
|---|
| 156 | SAS address = 0x2 |
|---|
| 157 | attached SAS address = 0x0 |
|---|
| 158 | attached phy identifier = 0 |
|---|
| 159 | Invalid DWORD count = 0 |
|---|
| 160 | Running disparity error count = 4 |
|---|
| 161 | Loss of DWORD synchronization = 0 |
|---|
| 162 | Phy reset problem = 0 |
|---|
| 163 | relative target port id = 2 |
|---|
| 164 | generation code = 1 |
|---|
| 165 | number of phys = 1 |
|---|
| 166 | phy identifier = 1 |
|---|
| 167 | attached device type: no device attached |
|---|
| 168 | attached reason: unknown |
|---|
| 169 | reason: unknown |
|---|
| 170 | negotiated logical link rate: phy enabled; unknown |
|---|
| 171 | attached initiator port: ssp=0 stp=0 smp=0 |
|---|
| 172 | attached target port: ssp=0 stp=0 smp=0 |
|---|
| 173 | SAS address = 0x5001173100309156 |
|---|
| 174 | attached SAS address = 0x0 |
|---|
| 175 | attached phy identifier = 0 |
|---|
| 176 | Invalid DWORD count = 0 |
|---|
| 177 | Running disparity error count = 0 |
|---|
| 178 | Loss of DWORD synchronization = 0 |
|---|
| 179 | Phy reset problem = 0 |
|---|
| 180 | Phy event descriptors: |
|---|
| 181 | Invalid word count: 0 |
|---|
| 182 | Running disparity error count: 0 |
|---|
| 183 | Loss of dword synchronization count: 0 |
|---|
| 184 | Phy reset problem count: 0 |
|---|
| 185 | phy identifier = 0 |
|---|
| 186 | attached device type: no device attached |
|---|
| 187 | attached reason: unknown |
|---|
| 188 | reason: unknown |
|---|
| 189 | negotiated logical link rate: phy enabled; unknown |
|---|
| 190 | attached initiator port: ssp=0 stp=0 smp=0 |
|---|
| 191 | attached target port: ssp=0 stp=0 smp=0 |
|---|
| 192 | SAS address = 0x2 |
|---|
| 193 | attached SAS address = 0x0 |
|---|
| 194 | attached phy identifier = 0 |
|---|
| 195 | Invalid DWORD count = 0 |
|---|
| 196 | Running disparity error count = 4 |
|---|
| 197 | Loss of DWORD synchronization = 0 |
|---|
| 198 | Phy reset problem = 0 |
|---|
| 199 | |
|---|
| 200 | |
|---|
| 201 | |
|---|
| 202 | |
|---|
| 203 | |
|---|
| 204 | |
|---|
| 205 | |
|---|
| 206 | |
|---|
| 207 | |
|---|
| 208 | |
|---|
| 209 | |
|---|
| 210 | |
|---|
| 211 | |
|---|
| 212 | |
|---|
| 213 | |
|---|
| 214 | |
|---|
| 215 | |
|---|
| 216 | |
|---|
| 217 | |
|---|
| 218 | |
|---|
| 219 | |
|---|
| 220 | |
|---|
| 221 | |
|---|
