| 1 |
|
|---|
| 2 | # /opt/smartmontools/5.40/sbin/smartctl -d 3ware,3 /dev/twl0 -x
|
|---|
| 3 |
|
|---|
| 4 | smartctl 5.40 2010-06-14 r3121 [x86_64-unknown-linux-gnu] (local build)
|
|---|
| 5 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 6 |
|
|---|
| 7 | === START OF INFORMATION SECTION ===
|
|---|
| 8 | Model Family: Seagate Barracuda ES.2
|
|---|
| 9 | Device Model: ST31000340NS
|
|---|
| 10 | Serial Number: 9QJ827CP
|
|---|
| 11 | Firmware Version: SN06
|
|---|
| 12 | User Capacity: 1,000,204,886,016 bytes
|
|---|
| 13 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 14 | ATA Version is: 8
|
|---|
| 15 | ATA Standard is: ATA-8-ACS revision 4
|
|---|
| 16 | Local Time is: Wed Jul 28 17:20:26 2010 PDT
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 |
|
|---|
| 20 | === START OF READ SMART DATA SECTION ===
|
|---|
| 21 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 22 |
|
|---|
| 23 | General SMART Values:
|
|---|
| 24 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 25 | was completed without error.
|
|---|
| 26 | Auto Offline Data Collection: Enabled.
|
|---|
| 27 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 28 | without error or no self-test has ever
|
|---|
| 29 | been run.
|
|---|
| 30 | Total time to complete Offline
|
|---|
| 31 | data collection: ( 634) seconds.
|
|---|
| 32 | Offline data collection
|
|---|
| 33 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 34 | Auto Offline data collection on/off support.
|
|---|
| 35 | Suspend Offline collection upon new
|
|---|
| 36 | command.
|
|---|
| 37 | Offline surface scan supported.
|
|---|
| 38 | Self-test supported.
|
|---|
| 39 | Conveyance Self-test supported.
|
|---|
| 40 | Selective Self-test supported.
|
|---|
| 41 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 42 | power-saving mode.
|
|---|
| 43 | Supports SMART auto save timer.
|
|---|
| 44 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 45 | General Purpose Logging supported.
|
|---|
| 46 | Short self-test routine
|
|---|
| 47 | recommended polling time: ( 1) minutes.
|
|---|
| 48 | Extended self-test routine
|
|---|
| 49 | recommended polling time: ( 228) minutes.
|
|---|
| 50 | Conveyance self-test routine
|
|---|
| 51 | recommended polling time: ( 2) minutes.
|
|---|
| 52 | SCT capabilities: (0x103d) SCT Status supported.
|
|---|
| 53 | SCT Error Recovery Control supported.
|
|---|
| 54 | SCT Feature Control supported.
|
|---|
| 55 | SCT Data Table supported.
|
|---|
| 56 |
|
|---|
| 57 | SMART Attributes Data Structure revision number: 10
|
|---|
| 58 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 59 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 60 | 1 Raw_Read_Error_Rate 0x000f 082 064 044 Pre-fail Always - 176746153
|
|---|
| 61 | 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
|
|---|
| 62 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 19
|
|---|
| 63 | 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
|---|
| 64 | 7 Seek_Error_Rate 0x000f 063 060 030 Pre-fail Always - 2284637
|
|---|
| 65 | 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 436
|
|---|
| 66 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|---|
| 67 | 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 19
|
|---|
| 68 | 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
|
|---|
| 69 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 70 | 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 71 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
|---|
| 72 | 190 Airflow_Temperature_Cel 0x0022 068 062 045 Old_age Always - 32 (Lifetime Min/Max 32/35)
|
|---|
| 73 | 194 Temperature_Celsius 0x0022 032 040 000 Old_age Always - 32 (0 23 0 0)
|
|---|
| 74 | 195 Hardware_ECC_Recovered 0x001a 069 048 000 Old_age Always - 176746153
|
|---|
| 75 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|---|
| 76 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|---|
| 77 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|---|
| 78 |
|
|---|
| 79 | General Purpose Logging (GPL) feature set supported
|
|---|
| 80 | General Purpose Log Directory Version 1
|
|---|
| 81 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 82 | GP/S Log at address 0x00 has 1 sectors [Log Directory]
|
|---|
| 83 | GP/S Log at address 0x01 has 1 sectors [Summary SMART error log]
|
|---|
| 84 | GP/S Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
|
|---|
| 85 | GP/S Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART error log]
|
|---|
| 86 | GP/S Log at address 0x06 has 1 sectors [SMART self-test log]
|
|---|
| 87 | GP/S Log at address 0x07 has 1 sectors [Extended self-test log]
|
|---|
| 88 | GP/S Log at address 0x09 has 1 sectors [Selective self-test log]
|
|---|
| 89 | GP/S Log at address 0x10 has 1 sectors [NCQ Command Error]
|
|---|
| 90 | GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
|
|---|
| 91 | GP/S Log at address 0x21 has 1 sectors [Write stream error log]
|
|---|
| 92 | GP/S Log at address 0x22 has 1 sectors [Read stream error log]
|
|---|
| 93 | GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
|
|---|
| 94 | GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
|
|---|
| 95 | GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
|
|---|
| 96 | GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
|
|---|
| 97 | GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
|
|---|
| 98 | GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
|
|---|
| 99 | GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
|
|---|
| 100 | GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
|
|---|
| 101 | GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
|
|---|
| 102 | GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
|
|---|
| 103 | GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
|
|---|
| 104 | GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
|
|---|
| 105 | GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
|
|---|
| 106 | GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
|
|---|
| 107 | GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
|
|---|
| 108 | GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
|
|---|
| 109 | GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
|
|---|
| 110 | GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
|
|---|
| 111 | GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
|
|---|
| 112 | GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
|
|---|
| 113 | GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
|
|---|
| 114 | GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
|
|---|
| 115 | GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
|
|---|
| 116 | GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
|
|---|
| 117 | GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
|
|---|
| 118 | GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
|
|---|
| 119 | GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
|
|---|
| 120 | GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
|
|---|
| 121 | GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
|
|---|
| 122 | GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
|
|---|
| 123 | GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
|
|---|
| 124 | GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
|
|---|
| 125 | GP/S Log at address 0xa1 has 20 sectors [Device vendor specific log]
|
|---|
| 126 | GP Log at address 0xa2 has 2248 sectors [Device vendor specific log]
|
|---|
| 127 | GP/S Log at address 0xa8 has 65 sectors [Device vendor specific log]
|
|---|
| 128 | GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
|
|---|
| 129 | GP Log at address 0xb0 has 2864 sectors [Device vendor specific log]
|
|---|
| 130 | GP Log at address 0xb6 has 1918 sectors [Device vendor specific log]
|
|---|
| 131 | GP Log at address 0xbe has 65535 sectors [Device vendor specific log]
|
|---|
| 132 | GP Log at address 0xbf has 65535 sectors [Device vendor specific log]
|
|---|
| 133 | GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
|
|---|
| 134 | GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
|
|---|
| 135 |
|
|---|
| 136 | SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|---|
| 137 | No Errors Logged
|
|---|
| 138 |
|
|---|
| 139 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 140 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 141 | # 1 Extended offline Completed without error 00% 399 -
|
|---|
| 142 | # 2 Extended offline Completed without error 00% 57 -
|
|---|
| 143 | # 3 Extended offline Completed without error 00% 24 -
|
|---|
| 144 |
|
|---|
| 145 | SMART Selective self-test log data structure revision number 1
|
|---|
| 146 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 147 | 1 0 0 Not_testing
|
|---|
| 148 | 2 0 0 Not_testing
|
|---|
| 149 | 3 0 0 Not_testing
|
|---|
| 150 | 4 0 0 Not_testing
|
|---|
| 151 | 5 0 0 Not_testing
|
|---|
| 152 | Selective self-test flags (0x0):
|
|---|
| 153 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 154 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 155 |
|
|---|
| 156 | SCT Status Version: 3
|
|---|
| 157 | SCT Version (vendor specific): 522 (0x020a)
|
|---|
| 158 | SCT Support Level: 1
|
|---|
| 159 | Device State: Active (0)
|
|---|
| 160 | Current Temperature: 33 Celsius
|
|---|
| 161 | Power Cycle Min/Max Temperature: 33/34 Celsius
|
|---|
| 162 | Lifetime Min/Max Temperature: 23/38 Celsius
|
|---|
| 163 | Under/Over Temperature Limit Count: 0/2
|
|---|
| 164 | SCT Temperature History Version: 2
|
|---|
| 165 | Temperature Sampling Period: 10 minutes
|
|---|
| 166 | Temperature Logging Interval: 10 minutes
|
|---|
| 167 | Min/Max recommended Temperature: 0/ 0 Celsius
|
|---|
| 168 | Min/Max Temperature Limit: 0/ 0 Celsius
|
|---|
| 169 | Temperature History Size (Index): 128 (91)
|
|---|
| 170 |
|
|---|
| 171 | Index Estimated Time Temperature Celsius
|
|---|
| 172 | 92 2010-07-27 20:10 32 *************
|
|---|
| 173 | ... ..( 13 skipped). .. *************
|
|---|
| 174 | 106 2010-07-27 22:30 32 *************
|
|---|
| 175 | 107 2010-07-27 22:40 31 ************
|
|---|
| 176 | 108 2010-07-27 22:50 32 *************
|
|---|
| 177 | 109 2010-07-27 23:00 32 *************
|
|---|
| 178 | 110 2010-07-27 23:10 31 ************
|
|---|
| 179 | 111 2010-07-27 23:20 31 ************
|
|---|
| 180 | 112 2010-07-27 23:30 32 *************
|
|---|
| 181 | 113 2010-07-27 23:40 32 *************
|
|---|
| 182 | 114 2010-07-27 23:50 32 *************
|
|---|
| 183 | 115 2010-07-28 00:00 31 ************
|
|---|
| 184 | 116 2010-07-28 00:10 32 *************
|
|---|
| 185 | ... ..( 14 skipped). .. *************
|
|---|
| 186 | 3 2010-07-28 02:40 32 *************
|
|---|
| 187 | 4 2010-07-28 02:50 33 **************
|
|---|
| 188 | ... ..( 34 skipped). .. **************
|
|---|
| 189 | 39 2010-07-28 08:40 33 **************
|
|---|
| 190 | 40 2010-07-28 08:50 32 *************
|
|---|
| 191 | ... ..( 5 skipped). .. *************
|
|---|
| 192 | 46 2010-07-28 09:50 32 *************
|
|---|
| 193 | 47 2010-07-28 10:00 33 **************
|
|---|
| 194 | ... ..( 4 skipped). .. **************
|
|---|
| 195 | 52 2010-07-28 10:50 33 **************
|
|---|
| 196 | 53 2010-07-28 11:00 34 ***************
|
|---|
| 197 | ... ..( 10 skipped). .. ***************
|
|---|
| 198 | 64 2010-07-28 12:50 34 ***************
|
|---|
| 199 | 65 2010-07-28 13:00 35 ****************
|
|---|
| 200 | 66 2010-07-28 13:10 34 ***************
|
|---|
| 201 | ... ..( 6 skipped). .. ***************
|
|---|
| 202 | 73 2010-07-28 14:20 34 ***************
|
|---|
| 203 | 74 2010-07-28 14:30 35 ****************
|
|---|
| 204 | 75 2010-07-28 14:40 36 *****************
|
|---|
| 205 | ... ..( 6 skipped). .. *****************
|
|---|
| 206 | 82 2010-07-28 15:50 36 *****************
|
|---|
| 207 | 83 2010-07-28 16:00 35 ****************
|
|---|
| 208 | 84 2010-07-28 16:10 35 ****************
|
|---|
| 209 | 85 2010-07-28 16:20 36 *****************
|
|---|
| 210 | 86 2010-07-28 16:30 ? -
|
|---|
| 211 | 87 2010-07-28 16:40 31 ************
|
|---|
| 212 | 88 2010-07-28 16:50 34 ***************
|
|---|
| 213 | 89 2010-07-28 17:00 ? -
|
|---|
| 214 | 90 2010-07-28 17:10 34 ***************
|
|---|
| 215 | 91 2010-07-28 17:20 33 **************
|
|---|
| 216 |
|
|---|
| 217 | SCT Error Recovery Control:
|
|---|
| 218 | Read: 100 (10.0 seconds)
|
|---|
| 219 | Write: 100 (10.0 seconds)
|
|---|
| 220 |
|
|---|
| 221 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 222 | ID Size Value Description
|
|---|
| 223 | 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 224 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 225 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 226 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 227 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 228 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 229 |
|
|---|
