| 1 |
|
|---|
| 2 | # /opt/smartmontools/5.40/sbin/smartctl -d 3ware,3 /dev/twl0 -a
|
|---|
| 3 |
|
|---|
| 4 | smartctl 5.40 2010-06-14 r3121 [x86_64-unknown-linux-gnu] (local build)
|
|---|
| 5 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 6 |
|
|---|
| 7 | === START OF INFORMATION SECTION ===
|
|---|
| 8 | Model Family: Seagate Barracuda ES.2
|
|---|
| 9 | Device Model: ST31000340NS
|
|---|
| 10 | Serial Number: 9QJ827CP
|
|---|
| 11 | Firmware Version: SN06
|
|---|
| 12 | User Capacity: 1,000,204,886,016 bytes
|
|---|
| 13 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 14 | ATA Version is: 8
|
|---|
| 15 | ATA Standard is: ATA-8-ACS revision 4
|
|---|
| 16 | Local Time is: Wed Jul 28 17:20:26 2010 PDT
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 |
|
|---|
| 20 | === START OF READ SMART DATA SECTION ===
|
|---|
| 21 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 22 |
|
|---|
| 23 | General SMART Values:
|
|---|
| 24 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 25 | was completed without error.
|
|---|
| 26 | Auto Offline Data Collection: Enabled.
|
|---|
| 27 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 28 | without error or no self-test has ever
|
|---|
| 29 | been run.
|
|---|
| 30 | Total time to complete Offline
|
|---|
| 31 | data collection: ( 634) seconds.
|
|---|
| 32 | Offline data collection
|
|---|
| 33 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 34 | Auto Offline data collection on/off support.
|
|---|
| 35 | Suspend Offline collection upon new
|
|---|
| 36 | command.
|
|---|
| 37 | Offline surface scan supported.
|
|---|
| 38 | Self-test supported.
|
|---|
| 39 | Conveyance Self-test supported.
|
|---|
| 40 | Selective Self-test supported.
|
|---|
| 41 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 42 | power-saving mode.
|
|---|
| 43 | Supports SMART auto save timer.
|
|---|
| 44 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 45 | General Purpose Logging supported.
|
|---|
| 46 | Short self-test routine
|
|---|
| 47 | recommended polling time: ( 1) minutes.
|
|---|
| 48 | Extended self-test routine
|
|---|
| 49 | recommended polling time: ( 228) minutes.
|
|---|
| 50 | Conveyance self-test routine
|
|---|
| 51 | recommended polling time: ( 2) minutes.
|
|---|
| 52 | SCT capabilities: (0x103d) SCT Status supported.
|
|---|
| 53 | SCT Error Recovery Control supported.
|
|---|
| 54 | SCT Feature Control supported.
|
|---|
| 55 | SCT Data Table supported.
|
|---|
| 56 |
|
|---|
| 57 | SMART Attributes Data Structure revision number: 10
|
|---|
| 58 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 59 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 60 | 1 Raw_Read_Error_Rate 0x000f 082 064 044 Pre-fail Always - 176746153
|
|---|
| 61 | 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
|
|---|
| 62 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 19
|
|---|
| 63 | 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
|---|
| 64 | 7 Seek_Error_Rate 0x000f 063 060 030 Pre-fail Always - 2284637
|
|---|
| 65 | 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 436
|
|---|
| 66 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|---|
| 67 | 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 19
|
|---|
| 68 | 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
|
|---|
| 69 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 70 | 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 71 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
|---|
| 72 | 190 Airflow_Temperature_Cel 0x0022 068 062 045 Old_age Always - 32 (Lifetime Min/Max 32/35)
|
|---|
| 73 | 194 Temperature_Celsius 0x0022 032 040 000 Old_age Always - 32 (0 23 0 0)
|
|---|
| 74 | 195 Hardware_ECC_Recovered 0x001a 069 048 000 Old_age Always - 176746153
|
|---|
| 75 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|---|
| 76 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|---|
| 77 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|---|
| 78 |
|
|---|
| 79 | SMART Error Log Version: 1
|
|---|
| 80 | No Errors Logged
|
|---|
| 81 |
|
|---|
| 82 | SMART Self-test log structure revision number 1
|
|---|
| 83 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 84 | # 1 Extended offline Completed without error 00% 399 -
|
|---|
| 85 | # 2 Extended offline Completed without error 00% 57 -
|
|---|
| 86 | # 3 Extended offline Completed without error 00% 24 -
|
|---|
| 87 |
|
|---|
| 88 | SMART Selective self-test log data structure revision number 1
|
|---|
| 89 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 90 | 1 0 0 Not_testing
|
|---|
| 91 | 2 0 0 Not_testing
|
|---|
| 92 | 3 0 0 Not_testing
|
|---|
| 93 | 4 0 0 Not_testing
|
|---|
| 94 | 5 0 0 Not_testing
|
|---|
| 95 | Selective self-test flags (0x0):
|
|---|
| 96 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 97 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 98 |
|
|---|
