| 1 | smartctl 5.40 2010-03-16 r3077 [x86_64-unknown-linux-gnu] (local build)
|
|---|
| 2 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: SAMSUNG SV1604N
|
|---|
| 6 | Serial Number: xxxxxxxxxxxxxx
|
|---|
| 7 | Firmware Version: TR100-23
|
|---|
| 8 | User Capacity: 160.041.885.696 bytes
|
|---|
| 9 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 10 | ATA Version is: 7
|
|---|
| 11 | ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
|
|---|
| 12 | Local Time is: Tue Jul 13 10:51:46 2010 CEST
|
|---|
| 13 | SMART support is: Available - device has SMART capability.
|
|---|
| 14 | SMART support is: Enabled
|
|---|
| 15 |
|
|---|
| 16 | === START OF READ SMART DATA SECTION ===
|
|---|
| 17 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 18 |
|
|---|
| 19 | General SMART Values:
|
|---|
| 20 | Offline data collection status: (0x84) Offline data collection activity
|
|---|
| 21 | was suspended by an interrupting command from host.
|
|---|
| 22 | Auto Offline Data Collection: Enabled.
|
|---|
| 23 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 24 | without error or no self-test has ever
|
|---|
| 25 | been run.
|
|---|
| 26 | Total time to complete Offline
|
|---|
| 27 | data collection: (4320) seconds.
|
|---|
| 28 | Offline data collection
|
|---|
| 29 | capabilities: (0x1b) SMART execute Offline immediate.
|
|---|
| 30 | Auto Offline data collection on/off support.
|
|---|
| 31 | Suspend Offline collection upon new
|
|---|
| 32 | command.
|
|---|
| 33 | Offline surface scan supported.
|
|---|
| 34 | Self-test supported.
|
|---|
| 35 | No Conveyance Self-test supported.
|
|---|
| 36 | No Selective Self-test supported.
|
|---|
| 37 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 38 | power-saving mode.
|
|---|
| 39 | Supports SMART auto save timer.
|
|---|
| 40 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 41 | No General Purpose Logging support.
|
|---|
| 42 | Short self-test routine
|
|---|
| 43 | recommended polling time: ( 1) minutes.
|
|---|
| 44 | Extended self-test routine
|
|---|
| 45 | recommended polling time: ( 72) minutes.
|
|---|
| 46 |
|
|---|
| 47 | SMART Attributes Data Structure revision number: 16
|
|---|
| 48 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 49 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 50 | 1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
|
|---|
| 51 | 3 Spin_Up_Time 0x0007 079 059 000 Pre-fail Always - 4096
|
|---|
| 52 | 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 6009
|
|---|
| 53 | 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
|
|---|
| 54 | 7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0
|
|---|
| 55 | 8 Seek_Time_Performance 0x0024 087 087 000 Old_age Offline - 11219
|
|---|
| 56 | 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 750322
|
|---|
| 57 | 10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail Always - 0
|
|---|
| 58 | 12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4263
|
|---|
| 59 | 194 Temperature_Celsius 0x0022 109 085 000 Old_age Always - 43
|
|---|
| 60 | 195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 156955019
|
|---|
| 61 | 196 Reallocated_Event_Count 0x0012 253 253 000 Old_age Always - 0
|
|---|
| 62 | 197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always - 0
|
|---|
| 63 | 198 Offline_Uncorrectable 0x0031 253 253 010 Pre-fail Offline - 0
|
|---|
| 64 | 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
|
|---|
| 65 | 200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
|
|---|
| 66 | 201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
|
|---|
| 67 |
|
|---|
| 68 | SMART Error Log Version: 1
|
|---|
| 69 | Warning: ATA error count 38949 inconsistent with error log pointer 5
|
|---|
| 70 |
|
|---|
| 71 | ATA Error Count: 38949 (device log contains only the most recent five errors)
|
|---|
| 72 | CR = Command Register [HEX]
|
|---|
| 73 | FR = Features Register [HEX]
|
|---|
| 74 | SC = Sector Count Register [HEX]
|
|---|
| 75 | SN = Sector Number Register [HEX]
|
|---|
| 76 | CL = Cylinder Low Register [HEX]
|
|---|
| 77 | CH = Cylinder High Register [HEX]
|
|---|
| 78 | DH = Device/Head Register [HEX]
|
|---|
| 79 | DC = Device Command Register [HEX]
|
|---|
| 80 | ER = Error register [HEX]
|
|---|
| 81 | ST = Status register [HEX]
|
|---|
| 82 | Powered_Up_Time is measured from power on, and printed as
|
|---|
| 83 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|---|
| 84 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|---|
| 85 |
|
|---|
| 86 | ... serveral errors here ...
|
|---|
| 87 |
|
|---|
| 88 | SMART Self-test log structure revision number 1
|
|---|
| 89 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 90 | # 1 Short offline Completed without error 00% 5847 -
|
|---|
| 91 |
|
|---|
| 92 | Device does not support Selective Self Tests/Logging
|
|---|
