| 1 | smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.11.5-1-ARCH] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Model Family: SiliconMotion based SSDs
|
|---|
| 6 | Device Model: TS64GSSD370S
|
|---|
| 7 | Serial Number: D448343642
|
|---|
| 8 | Firmware Version: O1225G
|
|---|
| 9 | User Capacity: 64 023 257 088 bytes [64,0 GB]
|
|---|
| 10 | Sector Size: 512 bytes logical/physical
|
|---|
| 11 | Rotation Rate: Solid State Device
|
|---|
| 12 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 13 | ATA Version is: ACS-2 (minor revision not indicated)
|
|---|
| 14 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 15 | Local Time is: Wed Jun 21 23:21:54 2017 MSK
|
|---|
| 16 | SMART support is: Available - device has SMART capability.
|
|---|
| 17 | SMART support is: Enabled
|
|---|
| 18 |
|
|---|
| 19 | === START OF READ SMART DATA SECTION ===
|
|---|
| 20 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 21 |
|
|---|
| 22 | General SMART Values:
|
|---|
| 23 | Offline data collection status: (0x02) Offline data collection activity
|
|---|
| 24 | was completed without error.
|
|---|
| 25 | Auto Offline Data Collection: Disabled.
|
|---|
| 26 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 27 | without error or no self-test has ever
|
|---|
| 28 | been run.
|
|---|
| 29 | Total time to complete Offline
|
|---|
| 30 | data collection: ( 57) seconds.
|
|---|
| 31 | Offline data collection
|
|---|
| 32 | capabilities: (0x71) SMART execute Offline immediate.
|
|---|
| 33 | No Auto Offline data collection support.
|
|---|
| 34 | Suspend Offline collection upon new
|
|---|
| 35 | command.
|
|---|
| 36 | No Offline surface scan supported.
|
|---|
| 37 | Self-test supported.
|
|---|
| 38 | Conveyance Self-test supported.
|
|---|
| 39 | Selective Self-test supported.
|
|---|
| 40 | SMART capabilities: (0x0002) Does not save SMART data before
|
|---|
| 41 | entering power-saving mode.
|
|---|
| 42 | Supports SMART auto save timer.
|
|---|
| 43 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 44 | General Purpose Logging supported.
|
|---|
| 45 | Short self-test routine
|
|---|
| 46 | recommended polling time: ( 1) minutes.
|
|---|
| 47 | Extended self-test routine
|
|---|
| 48 | recommended polling time: ( 1) minutes.
|
|---|
| 49 | Conveyance self-test routine
|
|---|
| 50 | recommended polling time: ( 1) minutes.
|
|---|
| 51 |
|
|---|
| 52 | SMART Attributes Data Structure revision number: 1
|
|---|
| 53 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 54 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 55 | 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 56 | 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 57 | 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 377
|
|---|
| 58 | 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 225
|
|---|
| 59 | 160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 60 | 161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 155
|
|---|
| 61 | 163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 9
|
|---|
| 62 | 164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 6868
|
|---|
| 63 | 165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 25
|
|---|
| 64 | 166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 65 | 167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 3
|
|---|
| 66 | 168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 3000
|
|---|
| 67 | 169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 100
|
|---|
| 68 | 175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 69 | 176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 70 | 177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0
|
|---|
| 71 | 178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 72 | 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 73 | 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 74 | 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 6
|
|---|
| 75 | 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 33
|
|---|
| 76 | 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 140
|
|---|
| 77 | 196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
|
|---|
| 78 | 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 79 | 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 80 | 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0
|
|---|
| 81 | 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
|
|---|
| 82 | 241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 3110
|
|---|
| 83 | 242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 4924
|
|---|
| 84 | 245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 6868
|
|---|
| 85 |
|
|---|
| 86 | SMART Error Log Version: 1
|
|---|
| 87 | No Errors Logged
|
|---|
| 88 |
|
|---|
| 89 | SMART Self-test log structure revision number 1
|
|---|
| 90 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 91 | # 1 Short offline Completed without error 00% 121 -
|
|---|
| 92 | # 2 Short offline Completed without error 00% 119 -
|
|---|
| 93 | # 3 Short offline Completed without error 00% 115 -
|
|---|
| 94 | # 4 Short offline Completed without error 00% 103 -
|
|---|
| 95 | # 5 Extended offline Completed without error 00% 101 -
|
|---|
| 96 | # 6 Short offline Completed without error 00% 97 -
|
|---|
| 97 | # 7 Short offline Completed without error 00% 95 -
|
|---|
| 98 |
|
|---|
| 99 | SMART Selective self-test log data structure revision number 1
|
|---|
| 100 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 101 | 1 0 0 Not_testing
|
|---|
| 102 | 2 0 0 Not_testing
|
|---|
| 103 | 3 0 0 Not_testing
|
|---|
| 104 | 4 0 0 Not_testing
|
|---|
| 105 | 5 0 0 Not_testing
|
|---|
| 106 | 7 0 65535 Read_scanning was completed without error
|
|---|
| 107 | Selective self-test flags (0x0):
|
|---|
| 108 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 109 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 110 |
|
|---|
