Ticket #842: smartctl-HFS128G32MND-2200A.txt

File smartctl-HFS128G32MND-2200A.txt, 14.6 KB (added by Eckhard, 3 years ago)
Line 
1smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-52-generic] (local build)
2Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
3
4Warning: DEFAULT entry missing in drive database file(s)
5=== START OF INFORMATION SECTION ===
6Device Model:     HFS128G32MND-2200A
7Firmware Version: 20200L00
8User Capacity:    128.035.676.160 bytes [128 GB]
9Sector Size:      512 bytes logical/physical
10Rotation Rate:    Solid State Device
11Device is:        Not in smartctl database [for details use: -P showall]
12ATA Version is:   ATA8-ACS (minor revision not indicated)
13SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
14Local Time is:    Sat May 27 16:01:04 2017 CEST
15SMART support is: Available - device has SMART capability.
16SMART support is: Enabled
17AAM feature is:   Unavailable
18APM level is:     254 (maximum performance)
19Rd look-ahead is: Enabled
20Write cache is:   Enabled
21ATA Security is:  Disabled, frozen [SEC2]
22Wt Cache Reorder: Unavailable
23
24=== START OF READ SMART DATA SECTION ===
25SMART overall-health self-assessment test result: PASSED
26
27General SMART Values:
28Offline data collection status:  (0x02) Offline data collection activity
29                                        was completed without error.
30                                        Auto Offline Data Collection: Disabled.
31Self-test execution status:      (   0) The previous self-test routine completed
32                                        without error or no self-test has ever
33                                        been run.
34Total time to complete Offline
35data collection:                (   10) seconds.
36Offline data collection
37capabilities:                    (0x19) SMART execute Offline immediate.
38                                        No Auto Offline data collection support.
39                                        Suspend Offline collection upon new
40                                        command.
41                                        Offline surface scan supported.
42                                        Self-test supported.
43                                        No Conveyance Self-test supported.
44                                        No Selective Self-test supported.
45SMART capabilities:            (0x0002) Does not save SMART data before
46                                        entering power-saving mode.
47                                        Supports SMART auto save timer.
48Error logging capability:        (0x01) Error logging supported.
49                                        General Purpose Logging supported.
50Short self-test routine
51recommended polling time:        (   1) minutes.
52Extended self-test routine
53recommended polling time:        (   8) minutes.
54
55SMART Attributes Data Structure revision number: 0
56Vendor Specific SMART Attributes with Thresholds:
57ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
58  1 Raw_Read_Error_Rate     POSR--   166   166   006    -    0
59  5 Reallocated_Sector_Ct   -O--CK   253   253   036    -    0
60  9 Power_On_Hours          -O--CK   100   100   000    -    157
61 12 Power_Cycle_Count       -O--CK   100   100   020    -    438
62100 Unknown_Attribute       -O--CK   100   100   000    -    258368
63170 Unknown_Attribute       -O--CK   100   100   000    -    62
64171 Unknown_Attribute       -O--CK   253   253   000    -    0
65172 Unknown_Attribute       -O--CK   253   253   000    -    0
66174 Unknown_Attribute       ----CK   100   100   000    -    19
67175 Program_Fail_Count_Chip -O--CK   253   253   000    -    0
68176 Erase_Fail_Count_Chip   -O--CK   253   253   000    -    0
69177 Wear_Leveling_Count     -O--CK   100   100   000    -    4
70178 Used_Rsvd_Blk_Cnt_Chip  -O--CK   100   100   000    -    25
71180 Unused_Rsvd_Blk_Cnt_Tot -O--CK   100   100   000    -    1938
72183 Runtime_Bad_Block       -O--CK   253   253   000    -    0
73187 Reported_Uncorrect      -O--CK   253   253   000    -    0
74188 Command_Timeout         -O--CK   253   253   000    -    0
75191 Unknown_SSD_Attribute   -O--CK   253   253   000    -    0
76194 Temperature_Celsius     -O----   030   000   000    -    30 (Min/Max 16/48)
77195 Hardware_ECC_Recovered  -O--CK   253   253   000    -    0
78199 UDMA_CRC_Error_Count    -O--CK   253   253   000    -    0
79201 Unknown_SSD_Attribute   -OSR--   100   100   000    -    0
80204 Soft_ECC_Correction     -OSR--   100   100   ---    -    0
81212 Unknown_Attribute       -O--CK   100   100   ---    -    471
82231 Temperature_Celsius     PO--CK   253   253   ---    -    0
83234 Unknown_Attribute       -O--CK   100   100   ---    -    414
84241 Total_LBAs_Written      -O--CK   100   100   ---    -    377
85242 Total_LBAs_Read         -O--CK   100   100   ---    -    624
86250 Read_Error_Retry_Rate   -O--CK   253   253   ---    -    0
87                            ||||||_ K auto-keep
88                            |||||__ C event count
89                            ||||___ R error rate
90                            |||____ S speed/performance
91                            ||_____ O updated online
92                            |______ P prefailure warning
93
94General Purpose Log Directory Version 1
95SMART           Log Directory Version 1 [multi-sector log support]
96Address    Access  R/W   Size  Description
970x00       GPL,SL  R/O      1  Log Directory
980x01           SL  R/O      1  Summary SMART error log
990x02           SL  R/O      4  Comprehensive SMART error log
1000x03       GPL     R/O      5  Ext. Comprehensive SMART error log
1010x04       GPL,SL  R/O      8  Device Statistics log
1020x06           SL  R/O      1  SMART self-test log
1030x07       GPL     R/O      2  Extended self-test log
1040x10       GPL     R/O      1  SATA NCQ Queued Error log
1050x11       GPL     R/O      1  SATA Phy Event Counters log
1060x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
107
108SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
109Device Error Count: 1548 (device log contains only the most recent 20 errors)
110        CR     = Command Register
111        FEATR  = Features Register
112        COUNT  = Count (was: Sector Count) Register
113        LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
114        LH     = LBA High (was: Cylinder High) Register    ]   LBA
115        LM     = LBA Mid (was: Cylinder Low) Register      ] Register
116        LL     = LBA Low (was: Sector Number) Register     ]
117        DV     = Device (was: Device/Head) Register
118        DC     = Device Control Register
119        ER     = Error register
120        ST     = Status register
121Powered_Up_Time is measured from power on, and printed as
122DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
123SS=sec, and sss=millisec. It "wraps" after 49.710 days.
124
125Error 1548 [7] occurred at disk power-on lifetime: 152 hours (6 days + 8 hours)
126  When the command that caused the error occurred, the device was in an unknown state.
127
128  After command completion occurred, registers were:
129  ER -- ST COUNT  LBA_48  LH LM LL DV DC
130  -- -- -- == -- == == == -- -- -- -- --
131  00 -- 00 00 00 00 00 00 00 00 00 00 ff   at LBA = 0x00000000 = 0
132
133  Commands leading to the command that caused the error were:
134  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
135  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
136  25 00 00 00 40 00 00 0c 4b 4a 40 40 40     00:00:15.110  READ DMA EXT
137  25 00 00 00 40 00 00 0c 4b 4a 00 40 40     00:00:15.110  READ DMA EXT
138  25 00 00 00 40 00 00 0c 4b 49 c0 40 40     00:00:15.110  READ DMA EXT
139  25 00 00 00 40 00 00 0c 4b 49 80 40 40     00:00:15.110  READ DMA EXT
140  25 00 00 00 40 00 00 0c 4b 49 40 40 40     00:00:15.110  READ DMA EXT
141
142Error 1547 [6] occurred at disk power-on lifetime: 151 hours (6 days + 7 hours)
143  When the command that caused the error occurred, the device was in an unknown state.
144
145  After command completion occurred, registers were:
146  ER -- ST COUNT  LBA_48  LH LM LL DV DC
147  -- -- -- == -- == == == -- -- -- -- --
148  00 -- 00 00 00 00 00 00 00 00 00 00 ff   at LBA = 0x00000000 = 0
149
150  Commands leading to the command that caused the error were:
151  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
152  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
153  25 00 00 00 40 00 00 0c 4b 4a 40 40 40     00:00:15.120  READ DMA EXT
154  25 00 00 00 40 00 00 0c 4b 4a 00 40 40     00:00:15.120  READ DMA EXT
155  25 00 00 00 40 00 00 0c 4b 49 c0 40 40     00:00:15.120  READ DMA EXT
156  25 00 00 00 40 00 00 0c 4b 49 80 40 40     00:00:15.120  READ DMA EXT
157  25 00 00 00 40 00 00 0c 4b 49 40 40 40     00:00:15.120  READ DMA EXT
158
159Error 1546 [5] occurred at disk power-on lifetime: 151 hours (6 days + 7 hours)
160  When the command that caused the error occurred, the device was in an unknown state.
161
162  After command completion occurred, registers were:
163  ER -- ST COUNT  LBA_48  LH LM LL DV DC
164  -- -- -- == -- == == == -- -- -- -- --
165  00 -- 00 00 00 00 00 00 00 00 00 00 ff   at LBA = 0x00000000 = 0
166
167  Commands leading to the command that caused the error were:
168  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
169  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
170  25 00 00 00 40 00 00 0c 4b 4a 40 40 40     00:00:15.120  READ DMA EXT
171  25 00 00 00 40 00 00 0c 4b 4a 00 40 40     00:00:15.120  READ DMA EXT
172  25 00 00 00 40 00 00 0c 4b 49 c0 40 40     00:00:15.120  READ DMA EXT
173  25 00 00 00 40 00 00 0c 4b 49 80 40 40     00:00:15.120  READ DMA EXT
174  25 00 00 00 40 00 00 0c 4b 49 40 40 40     00:00:15.120  READ DMA EXT
175
176Error 1545 [4] occurred at disk power-on lifetime: 150 hours (6 days + 6 hours)
177  When the command that caused the error occurred, the device was in an unknown state.
178
179  After command completion occurred, registers were:
180  ER -- ST COUNT  LBA_48  LH LM LL DV DC
181  -- -- -- == -- == == == -- -- -- -- --
182  00 -- 00 00 00 00 00 00 00 00 00 00 ff   at LBA = 0x00000000 = 0
183
184  Commands leading to the command that caused the error were:
185  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
186  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
187  25 00 00 00 40 00 00 0c 4b 4a 40 40 40     00:00:15.240  READ DMA EXT
188  25 00 00 00 40 00 00 0c 4b 4a 00 40 40     00:00:15.240  READ DMA EXT
189  25 00 00 00 40 00 00 0c 4b 49 c0 40 40     00:00:15.240  READ DMA EXT
190  25 00 00 00 40 00 00 0c 4b 49 80 40 40     00:00:15.240  READ DMA EXT
191  25 00 00 00 40 00 00 0c 4b 49 40 40 40     00:00:15.240  READ DMA EXT
192
193Error 1544 [3] occurred at disk power-on lifetime: 150 hours (6 days + 6 hours)
194  When the command that caused the error occurred, the device was in an unknown state.
195
196  After command completion occurred, registers were:
197  ER -- ST COUNT  LBA_48  LH LM LL DV DC
198  -- -- -- == -- == == == -- -- -- -- --
199  00 -- 00 00 00 00 00 00 00 00 00 00 ff   at LBA = 0x00000000 = 0
200
201  Commands leading to the command that caused the error were:
202  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
203  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
204  25 00 00 00 40 00 00 0c 4b 4a 40 40 40     00:00:15.240  READ DMA EXT
205  25 00 00 00 40 00 00 0c 4b 4a 00 40 40     00:00:15.240  READ DMA EXT
206  25 00 00 00 40 00 00 0c 4b 49 c0 40 40     00:00:15.240  READ DMA EXT
207  25 00 00 00 40 00 00 0c 4b 49 80 40 40     00:00:15.240  READ DMA EXT
208  25 00 00 00 40 00 00 0c 4b 49 40 40 40     00:00:15.240  READ DMA EXT
209
210Error 1543 [2] occurred at disk power-on lifetime: 150 hours (6 days + 6 hours)
211  When the command that caused the error occurred, the device was in an unknown state.
212
213  After command completion occurred, registers were:
214  ER -- ST COUNT  LBA_48  LH LM LL DV DC
215  -- -- -- == -- == == == -- -- -- -- --
216  00 -- 00 00 00 00 00 00 00 00 00 00 ff   at LBA = 0x00000000 = 0
217
218  Commands leading to the command that caused the error were:
219  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
220  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
221  25 00 00 00 40 00 00 0c 4b 4a 40 40 40     00:00:15.080  READ DMA EXT
222  25 00 00 00 40 00 00 0c 4b 4a 00 40 40     00:00:15.080  READ DMA EXT
223  25 00 00 00 40 00 00 0c 4b 49 c0 40 40     00:00:15.080  READ DMA EXT
224  25 00 00 00 40 00 00 0c 4b 49 80 40 40     00:00:15.080  READ DMA EXT
225  25 00 00 00 40 00 00 0c 4b 49 40 40 40     00:00:15.080  READ DMA EXT
226
227Error 1542 [1] occurred at disk power-on lifetime: 139 hours (5 days + 19 hours)
228  When the command that caused the error occurred, the device was in an unknown state.
229
230  After command completion occurred, registers were:
231  ER -- ST COUNT  LBA_48  LH LM LL DV DC
232  -- -- -- == -- == == == -- -- -- -- --
233  00 -- 00 00 00 00 00 00 00 00 00 00 ff   at LBA = 0x00000000 = 0
234
235  Commands leading to the command that caused the error were:
236  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
237  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
238  25 00 00 00 40 00 00 0c 4b 4a 40 40 40     00:00:15.220  READ DMA EXT
239  25 00 00 00 40 00 00 0c 4b 4a 00 40 40     00:00:15.220  READ DMA EXT
240  25 00 00 00 40 00 00 0c 4b 49 c0 40 40     00:00:15.220  READ DMA EXT
241  25 00 00 00 40 00 00 0c 4b 49 80 40 40     00:00:15.220  READ DMA EXT
242  25 00 00 00 40 00 00 0c 4b 49 40 40 40     00:00:15.220  READ DMA EXT
243
244Error 1541 [0] occurred at disk power-on lifetime: 139 hours (5 days + 19 hours)
245  When the command that caused the error occurred, the device was in an unknown state.
246
247  After command completion occurred, registers were:
248  ER -- ST COUNT  LBA_48  LH LM LL DV DC
249  -- -- -- == -- == == == -- -- -- -- --
250  00 -- 00 00 00 00 00 00 00 00 00 00 ff   at LBA = 0x00000000 = 0
251
252  Commands leading to the command that caused the error were:
253  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
254  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
255  25 00 00 00 40 00 00 0c 4b 4a 40 40 40     00:00:15.060  READ DMA EXT
256  25 00 00 00 40 00 00 0c 4b 4a 00 40 40     00:00:15.060  READ DMA EXT
257  25 00 00 00 40 00 00 0c 4b 49 c0 40 40     00:00:15.060  READ DMA EXT
258  25 00 00 00 40 00 00 0c 4b 49 80 40 40     00:00:15.060  READ DMA EXT
259  25 00 00 00 40 00 00 0c 4b 49 40 40 40     00:00:15.060  READ DMA EXT
260
261SMART Extended Self-test Log Version: 1 (2 sectors)
262Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
263# 1  Short offline       Completed without error       00%       157         -
264# 2  Short offline       Completed without error       00%         0         -
265# 3  Short offline       Completed without error       00%         0         -
266
267Selective Self-tests/Logging not supported
268
269SCT Commands not supported
270
271Device Statistics (GP Log 0x04)
272Page  Offset Size        Value Flags Description
2730x01  =====  =               =  ===  == General Statistics (empty) ==
2740x04  =====  =               =  ===  == General Errors Statistics (empty) ==
2750x05  =====  =               =  ===  == Temperature Statistics (empty) ==
2760x06  =====  =               =  ===  == Transport Statistics (empty) ==
2770x07  =====  =               =  ===  == Solid State Device Statistics (empty) ==
278                                |||_ C monitored condition met
279                                ||__ D supports DSN
280                                |___ N normalized value
281
282SATA Phy Event Counters (GP Log 0x11)
283ID      Size     Value  Description
2840x0001  2            0  Command failed due to ICRC error
2850x000a  2            2  Device-to-host register FISes sent due to a COMRESET
286