1 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.8.0-52-generic] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: WDC WD40NMZW-11GX6S1
|
---|
6 | Firmware Version: 01.01A01
|
---|
7 | User Capacity: 4.000.787.030.016 bytes [4,00 TB]
|
---|
8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
9 | Rotation Rate: 5400 rpm
|
---|
10 | Form Factor: 2.5 inches
|
---|
11 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
12 | ATA Version is: ACS-3 (minor revision not indicated)
|
---|
13 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
14 | Local Time is: Tue May 23 23:03:29 2017 PDT
|
---|
15 | SMART support is: Available - device has SMART capability.
|
---|
16 | SMART support is: Enabled
|
---|
17 | AAM feature is: Unavailable
|
---|
18 | APM level is: 128 (minimum power consumption without standby)
|
---|
19 | Rd look-ahead is: Enabled
|
---|
20 | Write cache is: Enabled
|
---|
21 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
22 | Wt Cache Reorder: Enabled
|
---|
23 |
|
---|
24 | === START OF READ SMART DATA SECTION ===
|
---|
25 | SMART overall-health self-assessment test result: PASSED
|
---|
26 |
|
---|
27 | General SMART Values:
|
---|
28 | Offline data collection status: (0x00) Offline data collection activity
|
---|
29 | was never started.
|
---|
30 | Auto Offline Data Collection: Disabled.
|
---|
31 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
32 | without error or no self-test has ever
|
---|
33 | been run.
|
---|
34 | Total time to complete Offline
|
---|
35 | data collection: ( 60) seconds.
|
---|
36 | Offline data collection
|
---|
37 | capabilities: (0x1b) SMART execute Offline immediate.
|
---|
38 | Auto Offline data collection on/off support.
|
---|
39 | Suspend Offline collection upon new
|
---|
40 | command.
|
---|
41 | Offline surface scan supported.
|
---|
42 | Self-test supported.
|
---|
43 | No Conveyance Self-test supported.
|
---|
44 | No Selective Self-test supported.
|
---|
45 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
46 | power-saving mode.
|
---|
47 | Supports SMART auto save timer.
|
---|
48 | Error logging capability: (0x01) Error logging supported.
|
---|
49 | General Purpose Logging supported.
|
---|
50 | Short self-test routine
|
---|
51 | recommended polling time: ( 2) minutes.
|
---|
52 | Extended self-test routine
|
---|
53 | recommended polling time: ( 5) minutes.
|
---|
54 | SCT capabilities: (0x30b5) SCT Status supported.
|
---|
55 | SCT Feature Control supported.
|
---|
56 | SCT Data Table supported.
|
---|
57 |
|
---|
58 | SMART Attributes Data Structure revision number: 16
|
---|
59 | Vendor Specific SMART Attributes with Thresholds:
|
---|
60 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
61 | 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0
|
---|
62 | 3 Spin_Up_Time POS--K 100 253 021 - 0
|
---|
63 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
---|
64 | 194 Temperature_Celsius -O---K 124 122 000 - 28
|
---|
65 | ||||||_ K auto-keep
|
---|
66 | |||||__ C event count
|
---|
67 | ||||___ R error rate
|
---|
68 | |||____ S speed/performance
|
---|
69 | ||_____ O updated online
|
---|
70 | |______ P prefailure warning
|
---|
71 |
|
---|
72 | General Purpose Log Directory Version 1
|
---|
73 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
74 | Address Access R/W Size Description
|
---|
75 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
76 | 0x01 SL R/O 1 Summary SMART error log
|
---|
77 | 0x02 SL R/O 5 Comprehensive SMART error log
|
---|
78 | 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
---|
79 | 0x06 SL R/O 1 SMART self-test log
|
---|
80 | 0x07 GPL R/O 1 Extended self-test log
|
---|
81 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
---|
82 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
83 | 0x24 GPL R/O 274 Current Device Internal Status Data log
|
---|
84 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
85 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
86 | 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
---|
87 | 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
|
---|
88 | 0xb7 GPL,SL VS 58 Device vendor specific log
|
---|
89 | 0xbd GPL,SL VS 1 Device vendor specific log
|
---|
90 | 0xc0 GPL,SL VS 1 Device vendor specific log
|
---|
91 | 0xc1 GPL VS 93 Device vendor specific log
|
---|
92 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
93 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
94 |
|
---|
95 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
---|
96 | No Errors Logged
|
---|
97 |
|
---|
98 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
99 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
100 |
|
---|
101 | Selective Self-tests/Logging not supported
|
---|
102 |
|
---|
103 | SCT Status Version: 3
|
---|
104 | SCT Version (vendor specific): 258 (0x0102)
|
---|
105 | SCT Support Level: 1
|
---|
106 | Device State: Active (0)
|
---|
107 | Current Temperature: 28 Celsius
|
---|
108 | Power Cycle Min/Max Temperature: 23/28 Celsius
|
---|
109 | Lifetime Min/Max Temperature: 23/28 Celsius
|
---|
110 | Lifetime Average Temperature: 24 Celsius
|
---|
111 | Under/Over Temperature Limit Count: 0/0
|
---|
112 | Vendor specific:
|
---|
113 | 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
---|
114 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
---|
115 |
|
---|
116 | SCT Temperature History Version: 2
|
---|
117 | Temperature Sampling Period: 1 minute
|
---|
118 | Temperature Logging Interval: 1 minute
|
---|
119 | Min/Max recommended Temperature: 0/60 Celsius
|
---|
120 | Min/Max Temperature Limit: -41/85 Celsius
|
---|
121 | Temperature History Size (Index): 128 (18)
|
---|
122 |
|
---|
123 | Index Estimated Time Temperature Celsius
|
---|
124 | 19 2017-05-23 20:56 ? -
|
---|
125 | ... ..(108 skipped). .. -
|
---|
126 | 0 2017-05-23 22:45 ? -
|
---|
127 | 1 2017-05-23 22:46 23 ****
|
---|
128 | 2 2017-05-23 22:47 ? -
|
---|
129 | 3 2017-05-23 22:48 24 *****
|
---|
130 | 4 2017-05-23 22:49 ? -
|
---|
131 | 5 2017-05-23 22:50 23 ****
|
---|
132 | 6 2017-05-23 22:51 ? -
|
---|
133 | 7 2017-05-23 22:52 23 ****
|
---|
134 | 8 2017-05-23 22:53 24 *****
|
---|
135 | 9 2017-05-23 22:54 25 ******
|
---|
136 | 10 2017-05-23 22:55 25 ******
|
---|
137 | 11 2017-05-23 22:56 25 ******
|
---|
138 | 12 2017-05-23 22:57 26 *******
|
---|
139 | 13 2017-05-23 22:58 26 *******
|
---|
140 | 14 2017-05-23 22:59 27 ********
|
---|
141 | 15 2017-05-23 23:00 27 ********
|
---|
142 | 16 2017-05-23 23:01 27 ********
|
---|
143 | 17 2017-05-23 23:02 28 *********
|
---|
144 | 18 2017-05-23 23:03 28 *********
|
---|
145 |
|
---|
146 | SCT Error Recovery Control command not supported
|
---|
147 |
|
---|
148 | Device Statistics (GP/SMART Log 0x04) not supported
|
---|
149 |
|
---|
150 | SATA Phy Event Counters (GP Log 0x11)
|
---|
151 | ID Size Value Description
|
---|
152 | 0x0001 2 0 Command failed due to ICRC error
|
---|
153 | 0x0002 2 0 R_ERR response for data FIS
|
---|
154 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
155 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
156 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
157 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
158 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
159 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
160 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
161 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
---|
162 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
163 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
164 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
165 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
166 | 0x8000 4 690 Vendor specific
|
---|
167 |
|
---|