1 | smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-79-generic] (local build) |
---|
2 | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net |
---|
3 | |
---|
4 | /dev/sda [megaraid_disk_00] [SAT]: Device open changed type from 'megaraid' to 'sat' |
---|
5 | === START OF INFORMATION SECTION === |
---|
6 | Device Model: INTEL SSDSC2KW240H6 |
---|
7 | Firmware Version: LSF036C |
---|
8 | User Capacity: 240.057.409.536 bytes [240 GB] |
---|
9 | Sector Size: 512 bytes logical/physical |
---|
10 | Device is: Not in smartctl database [for details use: -P showall] |
---|
11 | ATA Version is: 10 |
---|
12 | ATA Standard is: Not recognized. Minor revision code: 0xffff |
---|
13 | Local Time is: Sat May 6 09:44:20 2017 EEST |
---|
14 | SMART support is: Available - device has SMART capability. |
---|
15 | SMART support is: Enabled |
---|
16 | |
---|
17 | === START OF READ SMART DATA SECTION === |
---|
18 | SMART overall-health self-assessment test result: PASSED |
---|
19 | Warning: This result is based on an Attribute check. |
---|
20 | |
---|
21 | General SMART Values: |
---|
22 | Offline data collection status: (0x02) Offline data collection activity |
---|
23 | was completed without error. |
---|
24 | Auto Offline Data Collection: Disabled. |
---|
25 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
26 | without error or no self-test has ever |
---|
27 | been run. |
---|
28 | Total time to complete Offline |
---|
29 | data collection: ( 0) seconds. |
---|
30 | Offline data collection |
---|
31 | capabilities: (0x53) SMART execute Offline immediate. |
---|
32 | Auto Offline data collection on/off support. |
---|
33 | Suspend Offline collection upon new |
---|
34 | command. |
---|
35 | No Offline surface scan supported. |
---|
36 | Self-test supported. |
---|
37 | No Conveyance Self-test supported. |
---|
38 | Selective Self-test supported. |
---|
39 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
40 | power-saving mode. |
---|
41 | Supports SMART auto save timer. |
---|
42 | Error logging capability: (0x01) Error logging supported. |
---|
43 | General Purpose Logging supported. |
---|
44 | Short self-test routine |
---|
45 | recommended polling time: ( 2) minutes. |
---|
46 | Extended self-test routine |
---|
47 | recommended polling time: ( 15) minutes. |
---|
48 | SCT capabilities: (0x0039) SCT Status supported. |
---|
49 | SCT Error Recovery Control supported. |
---|
50 | SCT Feature Control supported. |
---|
51 | SCT Data Table supported. |
---|
52 | |
---|
53 | SMART Attributes Data Structure revision number: 1 |
---|
54 | Vendor Specific SMART Attributes with Thresholds: |
---|
55 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
56 | 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 1 |
---|
57 | 9 Power_On_Hours -O--CK 100 100 000 - 29 |
---|
58 | 12 Power_Cycle_Count -O--CK 100 100 000 - 4 |
---|
59 | 170 Unknown_Attribute PO--CK 099 099 010 - 0 |
---|
60 | 171 Unknown_Attribute -O--CK 100 100 010 - 0 |
---|
61 | 172 Unknown_Attribute -O--CK 100 100 010 - 0 |
---|
62 | 174 Unknown_Attribute -O--CK 100 100 000 - 1 |
---|
63 | 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 |
---|
64 | 184 End-to-End_Error PO--CK 100 100 090 - 0 |
---|
65 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 |
---|
66 | 190 Airflow_Temperature_Cel -O--CK 015 029 000 - 15 (Min/Max 13/29) |
---|
67 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 |
---|
68 | 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 |
---|
69 | 225 Load_Cycle_Count -O--CK 100 100 000 - 15716 |
---|
70 | 226 Load-in_Time -O--CK 100 100 000 - 0 |
---|
71 | 227 Torq-amp_Count -O--CK 100 100 000 - 0 |
---|
72 | 228 Power-off_Retract_Count -O--CK 100 100 000 - 0 |
---|
73 | 232 Available_Reservd_Space PO--CK 099 099 010 - 0 |
---|
74 | 233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 |
---|
75 | 241 Total_LBAs_Written -O--CK 100 100 000 - 15716 |
---|
76 | 242 Total_LBAs_Read -O--CK 100 100 000 - 189460 |
---|
77 | 249 Unknown_Attribute -O--CK 100 100 000 - 389 |
---|
78 | 252 Unknown_Attribute -O--CK 100 100 000 - 1 |
---|
79 | ||||||_ K auto-keep |
---|
80 | |||||__ C event count |
---|
81 | ||||___ R error rate |
---|
82 | |||____ S speed/performance |
---|
83 | ||_____ O updated online |
---|
84 | |______ P prefailure warning |
---|
85 | |
---|
86 | General Purpose Log Directory Version 1 |
---|
87 | SMART Log Directory Version 1 [multi-sector log support] |
---|
88 | GP/S Log at address 0x00 has 1 sectors [Log Directory] |
---|
89 | GP/S Log at address 0x01 has 1 sectors [Summary SMART error log] |
---|
90 | GP/S Log at address 0x02 has 1 sectors [Comprehensive SMART error log] |
---|
91 | GP/S Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] |
---|
92 | GP/S Log at address 0x04 has 8 sectors [Device Statistics] |
---|
93 | GP/S Log at address 0x06 has 1 sectors [SMART self-test log] |
---|
94 | GP/S Log at address 0x07 has 1 sectors [Extended self-test log] |
---|
95 | GP/S Log at address 0x09 has 1 sectors [Selective self-test log] |
---|
96 | GP/S Log at address 0x10 has 1 sectors [NCQ Command Error] |
---|
97 | GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters] |
---|
98 | GP/S Log at address 0x30 has 9 sectors [Reserved] |
---|
99 | GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] |
---|
100 | GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] |
---|
101 | GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] |
---|
102 | GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] |
---|
103 | GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] |
---|
104 | GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] |
---|
105 | GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] |
---|
106 | GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] |
---|
107 | GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] |
---|
108 | GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] |
---|
109 | GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] |
---|
110 | GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] |
---|
111 | GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] |
---|
112 | GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] |
---|
113 | GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] |
---|
114 | GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] |
---|
115 | GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] |
---|
116 | GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] |
---|
117 | GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] |
---|
118 | GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] |
---|
119 | GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] |
---|
120 | GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] |
---|
121 | GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] |
---|
122 | GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] |
---|
123 | GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] |
---|
124 | GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] |
---|
125 | GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] |
---|
126 | GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] |
---|
127 | GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] |
---|
128 | GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] |
---|
129 | GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] |
---|
130 | GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] |
---|
131 | GP/S Log at address 0xdf has 1 sectors [Device vendor specific log] |
---|
132 | GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] |
---|
133 | GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] |
---|
134 | |
---|
135 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
---|
136 | No Errors Logged |
---|
137 | |
---|
138 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
139 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
140 | # 1 Short offline Completed without error 00% 29 - |
---|
141 | # 2 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
142 | # 3 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
143 | # 4 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
144 | # 5 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
145 | # 6 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
146 | # 7 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
147 | # 8 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
148 | # 9 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
149 | #10 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
150 | #11 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
151 | #12 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
152 | #13 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
153 | #14 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
154 | #15 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
155 | #16 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
156 | #17 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
157 | #18 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
158 | #19 Vendor (0xff) Self-test routine in progress 150% 65535 - |
---|
159 | |
---|
160 | SMART Selective self-test log data structure revision number 1 |
---|
161 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
162 | 1 70403103932424 70403103932424 Not_testing |
---|
163 | 2 70403103932424 70403103932424 Not_testing |
---|
164 | 3 70403103932424 70403103932424 Not_testing |
---|
165 | 4 70403103932424 70403103932424 Not_testing |
---|
166 | 5 70403103932424 70403103932424 Not_testing |
---|
167 | Selective self-test flags (0x4008): |
---|
168 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
169 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
170 | |
---|
171 | SCT Status Version: 3 |
---|
172 | SCT Version (vendor specific): 0 (0x0000) |
---|
173 | SCT Support Level: 0 |
---|
174 | Device State: Active (0) |
---|
175 | Current Temperature: 20 Celsius |
---|
176 | Power Cycle Min/Max Temperature: 18/33 Celsius |
---|
177 | Lifetime Min/Max Temperature: 18/36 Celsius |
---|
178 | Under/Over Temperature Limit Count: 0/0 |
---|
179 | SCT Temperature History Version: 2 |
---|
180 | Temperature Sampling Period: 1 minute |
---|
181 | Temperature Logging Interval: 1 minute |
---|
182 | Min/Max recommended Temperature: 0/100 Celsius |
---|
183 | Min/Max Temperature Limit: 0/100 Celsius |
---|
184 | Temperature History Size (Index): 128 (73) |
---|
185 | |
---|
186 | Index Estimated Time Temperature Celsius |
---|
187 | 74 2017-05-06 07:37 20 * |
---|
188 | 75 2017-05-06 07:38 20 * |
---|
189 | 76 2017-05-06 07:39 21 ** |
---|
190 | 77 2017-05-06 07:40 20 * |
---|
191 | ... ..( 3 skipped). .. * |
---|
192 | 81 2017-05-06 07:44 20 * |
---|
193 | 82 2017-05-06 07:45 21 ** |
---|
194 | 83 2017-05-06 07:46 20 * |
---|
195 | ... ..( 4 skipped). .. * |
---|
196 | 88 2017-05-06 07:51 20 * |
---|
197 | 89 2017-05-06 07:52 21 ** |
---|
198 | 90 2017-05-06 07:53 20 * |
---|
199 | ... ..( 2 skipped). .. * |
---|
200 | 93 2017-05-06 07:56 20 * |
---|
201 | 94 2017-05-06 07:57 21 ** |
---|
202 | 95 2017-05-06 07:58 20 * |
---|
203 | 96 2017-05-06 07:59 21 ** |
---|
204 | 97 2017-05-06 08:00 20 * |
---|
205 | ... ..( 12 skipped). .. * |
---|
206 | 110 2017-05-06 08:13 20 * |
---|
207 | 111 2017-05-06 08:14 21 ** |
---|
208 | 112 2017-05-06 08:15 20 * |
---|
209 | ... ..( 2 skipped). .. * |
---|
210 | 115 2017-05-06 08:18 20 * |
---|
211 | 116 2017-05-06 08:19 26 ******* |
---|
212 | 117 2017-05-06 08:20 28 ********* |
---|
213 | 118 2017-05-06 08:21 31 ************ |
---|
214 | 119 2017-05-06 08:22 30 *********** |
---|
215 | 120 2017-05-06 08:23 30 *********** |
---|
216 | 121 2017-05-06 08:24 20 * |
---|
217 | ... ..( 36 skipped). .. * |
---|
218 | 30 2017-05-06 09:01 20 * |
---|
219 | 31 2017-05-06 09:02 21 ** |
---|
220 | 32 2017-05-06 09:03 20 * |
---|
221 | ... ..( 2 skipped). .. * |
---|
222 | 35 2017-05-06 09:06 20 * |
---|
223 | 36 2017-05-06 09:07 21 ** |
---|
224 | 37 2017-05-06 09:08 20 * |
---|
225 | ... ..( 4 skipped). .. * |
---|
226 | 42 2017-05-06 09:13 20 * |
---|
227 | 43 2017-05-06 09:14 21 ** |
---|
228 | 44 2017-05-06 09:15 20 * |
---|
229 | ... ..( 8 skipped). .. * |
---|
230 | 53 2017-05-06 09:24 20 * |
---|
231 | 54 2017-05-06 09:25 26 ******* |
---|
232 | 55 2017-05-06 09:26 26 ******* |
---|
233 | 56 2017-05-06 09:27 26 ******* |
---|
234 | 57 2017-05-06 09:28 30 *********** |
---|
235 | 58 2017-05-06 09:29 30 *********** |
---|
236 | 59 2017-05-06 09:30 21 ** |
---|
237 | 60 2017-05-06 09:31 20 * |
---|
238 | ... ..( 12 skipped). .. * |
---|
239 | 73 2017-05-06 09:44 20 * |
---|
240 | |
---|
241 | Error Write SCT (Get) Error Recovery Control Command failed: ATA return descriptor not supported by controller firmware |
---|
242 | Warning: device does not support SCT (Get) Error Recovery Control command |
---|
243 | |
---|
244 | SATA Phy Event Counters (GP Log 0x11) |
---|
245 | ID Size Value Description |
---|
246 | 0x0001 2 0 Command failed due to ICRC error |
---|
247 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
248 | 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET |
---|
249 | |
---|