| 1 | running 'smartctl -a' for drive /dev/sda
|
|---|
| 2 | smartctl 5.39.1 2010-01-28 r3054 [x86_64-pc-linux-gnu] (local build)
|
|---|
| 3 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 4 |
|
|---|
| 5 | === START OF INFORMATION SECTION ===
|
|---|
| 6 | Device Model: WDC WD15EARS-00Z5B1
|
|---|
| 7 | Serial Number: WD-WMAVU1578316
|
|---|
| 8 | Firmware Version: 80.00A80
|
|---|
| 9 | User Capacity: 1 500 301 910 016 bytes
|
|---|
| 10 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 11 | ATA Version is: 8
|
|---|
| 12 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 13 | Local Time is: Wed Jun 30 21:49:56 2010 YEKST
|
|---|
| 14 | SMART support is: Available - device has SMART capability.
|
|---|
| 15 | SMART support is: Enabled
|
|---|
| 16 |
|
|---|
| 17 | === START OF READ SMART DATA SECTION ===
|
|---|
| 18 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 19 |
|
|---|
| 20 | General SMART Values:
|
|---|
| 21 | Offline data collection status: (0x84) Offline data collection activity
|
|---|
| 22 | was suspended by an interrupting command from host.
|
|---|
| 23 | Auto Offline Data Collection: Enabled.
|
|---|
| 24 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 25 | without error or no self-test has ever
|
|---|
| 26 | been run.
|
|---|
| 27 | Total time to complete Offline
|
|---|
| 28 | data collection: (32400) seconds.
|
|---|
| 29 | Offline data collection
|
|---|
| 30 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 31 | Auto Offline data collection on/off support.
|
|---|
| 32 | Suspend Offline collection upon new
|
|---|
| 33 | command.
|
|---|
| 34 | Offline surface scan supported.
|
|---|
| 35 | Self-test supported.
|
|---|
| 36 | Conveyance Self-test supported.
|
|---|
| 37 | Selective Self-test supported.
|
|---|
| 38 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 39 | power-saving mode.
|
|---|
| 40 | Supports SMART auto save timer.
|
|---|
| 41 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 42 | General Purpose Logging supported.
|
|---|
| 43 | Short self-test routine
|
|---|
| 44 | recommended polling time: ( 2) minutes.
|
|---|
| 45 | Extended self-test routine
|
|---|
| 46 | recommended polling time: ( 255) minutes.
|
|---|
| 47 | Conveyance self-test routine
|
|---|
| 48 | recommended polling time: ( 5) minutes.
|
|---|
| 49 | SCT capabilities: (0x3031) SCT Status supported.
|
|---|
| 50 | SCT Feature Control supported.
|
|---|
| 51 | SCT Data Table supported.
|
|---|
| 52 |
|
|---|
| 53 | SMART Attributes Data Structure revision number: 16
|
|---|
| 54 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 55 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 56 | 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
|
|---|
| 57 | 3 Spin_Up_Time 0x0027 191 178 021 Pre-fail Always - 5441
|
|---|
| 58 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 159
|
|---|
| 59 | 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
|
|---|
| 60 | 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
|
|---|
| 61 | 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2609
|
|---|
| 62 | 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 63 | 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 64 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 127
|
|---|
| 65 | 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 61
|
|---|
| 66 | 193 Load_Cycle_Count 0x0032 166 166 000 Old_age Always - 104289
|
|---|
| 67 | 194 Temperature_Celsius 0x0022 099 092 000 Old_age Always - 51
|
|---|
| 68 | 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
|
|---|
| 69 | 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
|
|---|
| 70 | 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
|
|---|
| 71 | 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
|
|---|
| 72 | 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
|
|---|
| 73 |
|
|---|
| 74 | SMART Error Log Version: 1
|
|---|
| 75 | No Errors Logged
|
|---|
| 76 |
|
|---|
| 77 | SMART Self-test log structure revision number 1
|
|---|
| 78 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 79 | # 1 Short offline Completed without error 00% 2599 -
|
|---|
| 80 | # 2 Short offline Completed without error 00% 101 -
|
|---|
| 81 |
|
|---|
| 82 | SMART Selective self-test log data structure revision number 1
|
|---|
| 83 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 84 | 1 0 0 Not_testing
|
|---|
| 85 | 2 0 0 Not_testing
|
|---|
| 86 | 3 0 0 Not_testing
|
|---|
| 87 | 4 0 0 Not_testing
|
|---|
| 88 | 5 0 0 Not_testing
|
|---|
| 89 | Selective self-test flags (0x0):
|
|---|
| 90 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 91 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 92 |
|
|---|
| 93 | running 'smartctl -a' for drive /dev/sdb
|
|---|
| 94 | smartctl 5.39.1 2010-01-28 r3054 [x86_64-pc-linux-gnu] (local build)
|
|---|
| 95 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 96 |
|
|---|
| 97 | === START OF INFORMATION SECTION ===
|
|---|
| 98 | Model Family: Western Digital Caviar Green family
|
|---|
| 99 | Device Model: WDC WD10EADS-00M2B0
|
|---|
| 100 | Serial Number: WD-WCAV51020987
|
|---|
| 101 | Firmware Version: 01.00A01
|
|---|
| 102 | User Capacity: 1 000 204 886 016 bytes
|
|---|
| 103 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 104 | ATA Version is: 8
|
|---|
| 105 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 106 | Local Time is: Wed Jun 30 21:49:56 2010 YEKST
|
|---|
| 107 | SMART support is: Available - device has SMART capability.
|
|---|
| 108 | SMART support is: Enabled
|
|---|
| 109 |
|
|---|
| 110 | === START OF READ SMART DATA SECTION ===
|
|---|
| 111 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 112 |
|
|---|
| 113 | General SMART Values:
|
|---|
| 114 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 115 | was completed without error.
|
|---|
| 116 | Auto Offline Data Collection: Enabled.
|
|---|
| 117 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 118 | without error or no self-test has ever
|
|---|
| 119 | been run.
|
|---|
| 120 | Total time to complete Offline
|
|---|
| 121 | data collection: (19560) seconds.
|
|---|
| 122 | Offline data collection
|
|---|
| 123 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 124 | Auto Offline data collection on/off support.
|
|---|
| 125 | Suspend Offline collection upon new
|
|---|
| 126 | command.
|
|---|
| 127 | Offline surface scan supported.
|
|---|
| 128 | Self-test supported.
|
|---|
| 129 | Conveyance Self-test supported.
|
|---|
| 130 | Selective Self-test supported.
|
|---|
| 131 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 132 | power-saving mode.
|
|---|
| 133 | Supports SMART auto save timer.
|
|---|
| 134 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 135 | General Purpose Logging supported.
|
|---|
| 136 | Short self-test routine
|
|---|
| 137 | recommended polling time: ( 2) minutes.
|
|---|
| 138 | Extended self-test routine
|
|---|
| 139 | recommended polling time: ( 226) minutes.
|
|---|
| 140 | Conveyance self-test routine
|
|---|
| 141 | recommended polling time: ( 5) minutes.
|
|---|
| 142 | SCT capabilities: (0x303f) SCT Status supported.
|
|---|
| 143 | SCT Feature Control supported.
|
|---|
| 144 | SCT Data Table supported.
|
|---|
| 145 |
|
|---|
| 146 | SMART Attributes Data Structure revision number: 16
|
|---|
| 147 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 148 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 149 | 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
|
|---|
| 150 | 3 Spin_Up_Time 0x0027 117 102 021 Pre-fail Always - 7141
|
|---|
| 151 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 393
|
|---|
| 152 | 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
|
|---|
| 153 | 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
|
|---|
| 154 | 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 6196
|
|---|
| 155 | 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 156 | 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 157 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 371
|
|---|
| 158 | 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 270
|
|---|
| 159 | 193 Load_Cycle_Count 0x0032 182 182 000 Old_age Always - 54749
|
|---|
| 160 | 194 Temperature_Celsius 0x0022 099 091 000 Old_age Always - 48
|
|---|
| 161 | 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
|
|---|
| 162 | 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
|
|---|
| 163 | 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1
|
|---|
| 164 | 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
|
|---|
| 165 | 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
|
|---|
| 166 |
|
|---|
| 167 | SMART Error Log Version: 1
|
|---|
| 168 | No Errors Logged
|
|---|
| 169 |
|
|---|
| 170 | SMART Self-test log structure revision number 1
|
|---|
| 171 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 172 | # 1 Short offline Completed: read failure 90% 6186 1951323329
|
|---|
| 173 | # 2 Short offline Completed: read failure 90% 6181 1951323329
|
|---|
| 174 |
|
|---|
| 175 | SMART Selective self-test log data structure revision number 1
|
|---|
| 176 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 177 | 1 0 0 Not_testing
|
|---|
| 178 | 2 0 0 Not_testing
|
|---|
| 179 | 3 0 0 Not_testing
|
|---|
| 180 | 4 0 0 Not_testing
|
|---|
| 181 | 5 0 0 Not_testing
|
|---|
| 182 | Selective self-test flags (0x0):
|
|---|
| 183 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 184 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 185 |
|
|---|
| 186 | running 'smartctl -a' for drive /dev/sdc
|
|---|
| 187 | smartctl 5.39.1 2010-01-28 r3054 [x86_64-pc-linux-gnu] (local build)
|
|---|
| 188 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 189 |
|
|---|
| 190 | === START OF INFORMATION SECTION ===
|
|---|
| 191 | Model Family: Western Digital Caviar Green family
|
|---|
| 192 | Device Model: WDC WD10EADS-65L5B1
|
|---|
| 193 | Serial Number: WD-WCAU49389498
|
|---|
| 194 | Firmware Version: 01.01A01
|
|---|
| 195 | User Capacity: 1 000 204 886 016 bytes
|
|---|
| 196 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 197 | ATA Version is: 8
|
|---|
| 198 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 199 | Local Time is: Wed Jun 30 21:49:56 2010 YEKST
|
|---|
| 200 | SMART support is: Available - device has SMART capability.
|
|---|
| 201 | SMART support is: Enabled
|
|---|
| 202 |
|
|---|
| 203 | === START OF READ SMART DATA SECTION ===
|
|---|
| 204 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 205 |
|
|---|
| 206 | General SMART Values:
|
|---|
| 207 | Offline data collection status: (0x84) Offline data collection activity
|
|---|
| 208 | was suspended by an interrupting command from host.
|
|---|
| 209 | Auto Offline Data Collection: Enabled.
|
|---|
| 210 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 211 | without error or no self-test has ever
|
|---|
| 212 | been run.
|
|---|
| 213 | Total time to complete Offline
|
|---|
| 214 | data collection: (22800) seconds.
|
|---|
| 215 | Offline data collection
|
|---|
| 216 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 217 | Auto Offline data collection on/off support.
|
|---|
| 218 | Suspend Offline collection upon new
|
|---|
| 219 | command.
|
|---|
| 220 | Offline surface scan supported.
|
|---|
| 221 | Self-test supported.
|
|---|
| 222 | Conveyance Self-test supported.
|
|---|
| 223 | Selective Self-test supported.
|
|---|
| 224 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 225 | power-saving mode.
|
|---|
| 226 | Supports SMART auto save timer.
|
|---|
| 227 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 228 | General Purpose Logging supported.
|
|---|
| 229 | Short self-test routine
|
|---|
| 230 | recommended polling time: ( 2) minutes.
|
|---|
| 231 | Extended self-test routine
|
|---|
| 232 | recommended polling time: ( 255) minutes.
|
|---|
| 233 | Conveyance self-test routine
|
|---|
| 234 | recommended polling time: ( 5) minutes.
|
|---|
| 235 | SCT capabilities: (0x303f) SCT Status supported.
|
|---|
| 236 | SCT Feature Control supported.
|
|---|
| 237 | SCT Data Table supported.
|
|---|
| 238 |
|
|---|
| 239 | SMART Attributes Data Structure revision number: 16
|
|---|
| 240 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 241 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 242 | 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
|
|---|
| 243 | 3 Spin_Up_Time 0x0027 173 158 021 Pre-fail Always - 6333
|
|---|
| 244 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 274
|
|---|
| 245 | 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
|
|---|
| 246 | 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
|
|---|
| 247 | 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 8840
|
|---|
| 248 | 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 249 | 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 250 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 256
|
|---|
| 251 | 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 47
|
|---|
| 252 | 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 274
|
|---|
| 253 | 194 Temperature_Celsius 0x0022 102 095 000 Old_age Always - 48
|
|---|
| 254 | 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
|
|---|
| 255 | 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
|
|---|
| 256 | 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1
|
|---|
| 257 | 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
|
|---|
| 258 | 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
|
|---|
| 259 |
|
|---|
| 260 | SMART Error Log Version: 1
|
|---|
| 261 | No Errors Logged
|
|---|
| 262 |
|
|---|
| 263 | SMART Self-test log structure revision number 1
|
|---|
| 264 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 265 | # 1 Short offline Completed: read failure 90% 8830 113421466
|
|---|
| 266 | # 2 Short offline Completed: read failure 90% 8830 113421466
|
|---|
| 267 | # 3 Short offline Completed: read failure 90% 8824 113421466
|
|---|
| 268 | # 4 Short offline Completed without error 00% 0 -
|
|---|
| 269 |
|
|---|
| 270 | SMART Selective self-test log data structure revision number 1
|
|---|
| 271 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 272 | 1 0 0 Not_testing
|
|---|
| 273 | 2 0 0 Not_testing
|
|---|
| 274 | 3 0 0 Not_testing
|
|---|
| 275 | 4 0 0 Not_testing
|
|---|
| 276 | 5 0 0 Not_testing
|
|---|
| 277 | Selective self-test flags (0x0):
|
|---|
| 278 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 279 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 280 |
|
|---|
| 281 | running 'smartctl -a' for drive /dev/sdd
|
|---|
| 282 | smartctl 5.39.1 2010-01-28 r3054 [x86_64-pc-linux-gnu] (local build)
|
|---|
| 283 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 284 |
|
|---|
| 285 | === START OF INFORMATION SECTION ===
|
|---|
| 286 | Model Family: Western Digital Caviar SE Serial ATA family
|
|---|
| 287 | Device Model: WDC WD3000JS-00PDB0
|
|---|
| 288 | Serial Number: WD-WCAPD2588589
|
|---|
| 289 | Firmware Version: 21.00M21
|
|---|
| 290 | User Capacity: 300 067 970 560 bytes
|
|---|
| 291 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 292 | ATA Version is: 7
|
|---|
| 293 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 294 | Local Time is: Wed Jun 30 21:49:57 2010 YEKST
|
|---|
| 295 | SMART support is: Available - device has SMART capability.
|
|---|
| 296 | SMART support is: Enabled
|
|---|
| 297 |
|
|---|
| 298 | === START OF READ SMART DATA SECTION ===
|
|---|
| 299 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 300 |
|
|---|
| 301 | General SMART Values:
|
|---|
| 302 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 303 | was completed without error.
|
|---|
| 304 | Auto Offline Data Collection: Enabled.
|
|---|
| 305 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 306 | without error or no self-test has ever
|
|---|
| 307 | been run.
|
|---|
| 308 | Total time to complete Offline
|
|---|
| 309 | data collection: (9600) seconds.
|
|---|
| 310 | Offline data collection
|
|---|
| 311 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 312 | Auto Offline data collection on/off support.
|
|---|
| 313 | Suspend Offline collection upon new
|
|---|
| 314 | command.
|
|---|
| 315 | Offline surface scan supported.
|
|---|
| 316 | Self-test supported.
|
|---|
| 317 | Conveyance Self-test supported.
|
|---|
| 318 | Selective Self-test supported.
|
|---|
| 319 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 320 | power-saving mode.
|
|---|
| 321 | Supports SMART auto save timer.
|
|---|
| 322 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 323 | General Purpose Logging supported.
|
|---|
| 324 | Short self-test routine
|
|---|
| 325 | recommended polling time: ( 2) minutes.
|
|---|
| 326 | Extended self-test routine
|
|---|
| 327 | recommended polling time: ( 111) minutes.
|
|---|
| 328 | Conveyance self-test routine
|
|---|
| 329 | recommended polling time: ( 6) minutes.
|
|---|
| 330 | SCT capabilities: (0x103f) SCT Status supported.
|
|---|
| 331 | SCT Feature Control supported.
|
|---|
| 332 | SCT Data Table supported.
|
|---|
| 333 |
|
|---|
| 334 | SMART Attributes Data Structure revision number: 16
|
|---|
| 335 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 336 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 337 | 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 10
|
|---|
| 338 | 3 Spin_Up_Time 0x0003 190 176 021 Pre-fail Always - 5475
|
|---|
| 339 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 702
|
|---|
| 340 | 5 Reallocated_Sector_Ct 0x0033 197 197 140 Pre-fail Always - 20
|
|---|
| 341 | 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
|
|---|
| 342 | 9 Power_On_Hours 0x0032 063 063 000 Old_age Always - 27333
|
|---|
| 343 | 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
|
|---|
| 344 | 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
|
|---|
| 345 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 689
|
|---|
| 346 | 194 Temperature_Celsius 0x0022 097 001 000 Old_age Always - 53
|
|---|
| 347 | 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
|
|---|
| 348 | 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
|
|---|
| 349 | 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
|
|---|
| 350 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 479
|
|---|
| 351 | 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
|
|---|
| 352 |
|
|---|
| 353 | SMART Error Log Version: 1
|
|---|
| 354 | No Errors Logged
|
|---|
| 355 |
|
|---|
| 356 | SMART Self-test log structure revision number 1
|
|---|
| 357 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 358 | # 1 Short offline Completed without error 00% 27332 -
|
|---|
| 359 | # 2 Short offline Completed without error 00% 14339 -
|
|---|
| 360 | # 3 Extended offline Completed without error 00% 1082 -
|
|---|
| 361 |
|
|---|
| 362 | SMART Selective self-test log data structure revision number 1
|
|---|
| 363 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 364 | 1 0 0 Not_testing
|
|---|
| 365 | 2 0 0 Not_testing
|
|---|
| 366 | 3 0 0 Not_testing
|
|---|
| 367 | 4 0 0 Not_testing
|
|---|
| 368 | 5 0 0 Not_testing
|
|---|
| 369 | Selective self-test flags (0x0):
|
|---|
| 370 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 371 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 372 |
|
|---|
| 373 | running 'smartctl -a' for drive /dev/sde
|
|---|
| 374 | smartctl 5.39.1 2010-01-28 r3054 [x86_64-pc-linux-gnu] (local build)
|
|---|
| 375 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 376 |
|
|---|
| 377 | === START OF INFORMATION SECTION ===
|
|---|
| 378 | Model Family: Western Digital Caviar Blue Serial ATA family
|
|---|
| 379 | Device Model: WDC WD2500AAJS-00VTA0
|
|---|
| 380 | Serial Number: WD-WMART0626341
|
|---|
| 381 | Firmware Version: 01.01B01
|
|---|
| 382 | User Capacity: 250 058 268 160 bytes
|
|---|
| 383 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 384 | ATA Version is: 8
|
|---|
| 385 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 386 | Local Time is: Wed Jun 30 21:49:57 2010 YEKST
|
|---|
| 387 | SMART support is: Available - device has SMART capability.
|
|---|
| 388 | SMART support is: Enabled
|
|---|
| 389 |
|
|---|
| 390 | === START OF READ SMART DATA SECTION ===
|
|---|
| 391 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 392 |
|
|---|
| 393 | General SMART Values:
|
|---|
| 394 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 395 | was completed without error.
|
|---|
| 396 | Auto Offline Data Collection: Enabled.
|
|---|
| 397 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 398 | without error or no self-test has ever
|
|---|
| 399 | been run.
|
|---|
| 400 | Total time to complete Offline
|
|---|
| 401 | data collection: (4980) seconds.
|
|---|
| 402 | Offline data collection
|
|---|
| 403 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 404 | Auto Offline data collection on/off support.
|
|---|
| 405 | Suspend Offline collection upon new
|
|---|
| 406 | command.
|
|---|
| 407 | Offline surface scan supported.
|
|---|
| 408 | Self-test supported.
|
|---|
| 409 | Conveyance Self-test supported.
|
|---|
| 410 | Selective Self-test supported.
|
|---|
| 411 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 412 | power-saving mode.
|
|---|
| 413 | Supports SMART auto save timer.
|
|---|
| 414 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 415 | General Purpose Logging supported.
|
|---|
| 416 | Short self-test routine
|
|---|
| 417 | recommended polling time: ( 2) minutes.
|
|---|
| 418 | Extended self-test routine
|
|---|
| 419 | recommended polling time: ( 61) minutes.
|
|---|
| 420 | Conveyance self-test routine
|
|---|
| 421 | recommended polling time: ( 5) minutes.
|
|---|
| 422 | SCT capabilities: (0x303f) SCT Status supported.
|
|---|
| 423 | SCT Feature Control supported.
|
|---|
| 424 | SCT Data Table supported.
|
|---|
| 425 |
|
|---|
| 426 | SMART Attributes Data Structure revision number: 16
|
|---|
| 427 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 428 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 429 | 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
|
|---|
| 430 | 3 Spin_Up_Time 0x0003 175 174 021 Pre-fail Always - 2216
|
|---|
| 431 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 15
|
|---|
| 432 | 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
|
|---|
| 433 | 7 Seek_Error_Rate 0x000e 200 200 000 Old_age Always - 0
|
|---|
| 434 | 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16500
|
|---|
| 435 | 10 Spin_Retry_Count 0x0012 100 253 000 Old_age Always - 0
|
|---|
| 436 | 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
|
|---|
| 437 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 351
|
|---|
| 438 | 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 203
|
|---|
| 439 | 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 351
|
|---|
| 440 | 194 Temperature_Celsius 0x0022 094 077 000 Old_age Always - 49
|
|---|
| 441 | 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
|
|---|
| 442 | 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 6
|
|---|
| 443 | 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 6
|
|---|
| 444 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|---|
| 445 | 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 7
|
|---|
| 446 |
|
|---|
| 447 | SMART Error Log Version: 1
|
|---|
| 448 | No Errors Logged
|
|---|
| 449 |
|
|---|
| 450 | SMART Self-test log structure revision number 1
|
|---|
| 451 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 452 | # 1 Short offline Completed: read failure 90% 16499 22548153
|
|---|
| 453 | # 2 Extended offline Completed without error 00% 8303 -
|
|---|
| 454 | # 3 Short offline Completed without error 00% 4291 -
|
|---|
| 455 |
|
|---|
| 456 | SMART Selective self-test log data structure revision number 1
|
|---|
| 457 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 458 | 1 0 0 Not_testing
|
|---|
| 459 | 2 0 0 Not_testing
|
|---|
| 460 | 3 0 0 Not_testing
|
|---|
| 461 | 4 0 0 Not_testing
|
|---|
| 462 | 5 0 0 Not_testing
|
|---|
| 463 | Selective self-test flags (0x0):
|
|---|
| 464 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 465 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
