1 | running 'smartctl -a' for drive /dev/sda |
---|
2 | smartctl 5.39.1 2010-01-28 r3054 [x86_64-pc-linux-gnu] (local build) |
---|
3 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net |
---|
4 | |
---|
5 | === START OF INFORMATION SECTION === |
---|
6 | Device Model: WDC WD15EARS-00Z5B1 |
---|
7 | Serial Number: WD-WMAVU1578316 |
---|
8 | Firmware Version: 80.00A80 |
---|
9 | User Capacity: 1 500 301 910 016 bytes |
---|
10 | Device is: Not in smartctl database [for details use: -P showall] |
---|
11 | ATA Version is: 8 |
---|
12 | ATA Standard is: Exact ATA specification draft version not indicated |
---|
13 | Local Time is: Wed Jun 30 21:43:24 2010 YEKST |
---|
14 | SMART support is: Available - device has SMART capability. |
---|
15 | SMART support is: Enabled |
---|
16 | |
---|
17 | === START OF READ SMART DATA SECTION === |
---|
18 | SMART overall-health self-assessment test result: PASSED |
---|
19 | |
---|
20 | General SMART Values: |
---|
21 | Offline data collection status: (0x84) Offline data collection activity |
---|
22 | was suspended by an interrupting command from host. |
---|
23 | Auto Offline Data Collection: Enabled. |
---|
24 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
25 | without error or no self-test has ever |
---|
26 | been run. |
---|
27 | Total time to complete Offline |
---|
28 | data collection: (32400) seconds. |
---|
29 | Offline data collection |
---|
30 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
31 | Auto Offline data collection on/off support. |
---|
32 | Suspend Offline collection upon new |
---|
33 | command. |
---|
34 | Offline surface scan supported. |
---|
35 | Self-test supported. |
---|
36 | Conveyance Self-test supported. |
---|
37 | Selective Self-test supported. |
---|
38 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
39 | power-saving mode. |
---|
40 | Supports SMART auto save timer. |
---|
41 | Error logging capability: (0x01) Error logging supported. |
---|
42 | General Purpose Logging supported. |
---|
43 | Short self-test routine |
---|
44 | recommended polling time: ( 2) minutes. |
---|
45 | Extended self-test routine |
---|
46 | recommended polling time: ( 255) minutes. |
---|
47 | Conveyance self-test routine |
---|
48 | recommended polling time: ( 5) minutes. |
---|
49 | SCT capabilities: (0x3031) SCT Status supported. |
---|
50 | SCT Feature Control supported. |
---|
51 | SCT Data Table supported. |
---|
52 | |
---|
53 | SMART Attributes Data Structure revision number: 16 |
---|
54 | Vendor Specific SMART Attributes with Thresholds: |
---|
55 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
---|
56 | 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 |
---|
57 | 3 Spin_Up_Time 0x0027 191 178 021 Pre-fail Always - 5416 |
---|
58 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 158 |
---|
59 | 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 |
---|
60 | 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 |
---|
61 | 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2609 |
---|
62 | 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 |
---|
63 | 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 |
---|
64 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 126 |
---|
65 | 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 61 |
---|
66 | 193 Load_Cycle_Count 0x0032 166 166 000 Old_age Always - 104288 |
---|
67 | 194 Temperature_Celsius 0x0022 098 092 000 Old_age Always - 52 |
---|
68 | 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 |
---|
69 | 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 |
---|
70 | 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 |
---|
71 | 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 |
---|
72 | 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 |
---|
73 | |
---|
74 | SMART Error Log Version: 1 |
---|
75 | No Errors Logged |
---|
76 | |
---|
77 | SMART Self-test log structure revision number 1 |
---|
78 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
79 | # 1 Short offline Completed without error 00% 2599 - |
---|
80 | # 2 Short offline Completed without error 00% 101 - |
---|
81 | |
---|
82 | SMART Selective self-test log data structure revision number 1 |
---|
83 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
84 | 1 0 0 Not_testing |
---|
85 | 2 0 0 Not_testing |
---|
86 | 3 0 0 Not_testing |
---|
87 | 4 0 0 Not_testing |
---|
88 | 5 0 0 Not_testing |
---|
89 | Selective self-test flags (0x0): |
---|
90 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
91 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
92 | |
---|
93 | running 'smartctl -a' for drive /dev/sdb |
---|
94 | smartctl 5.39.1 2010-01-28 r3054 [x86_64-pc-linux-gnu] (local build) |
---|
95 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net |
---|
96 | |
---|
97 | === START OF INFORMATION SECTION === |
---|
98 | Model Family: Western Digital Caviar Green family |
---|
99 | Device Model: WDC WD10EADS-00M2B0 |
---|
100 | Serial Number: WD-WCAV51020987 |
---|
101 | Firmware Version: 01.00A01 |
---|
102 | User Capacity: 1 000 204 886 016 bytes |
---|
103 | Device is: In smartctl database [for details use: -P show] |
---|
104 | ATA Version is: 8 |
---|
105 | ATA Standard is: Exact ATA specification draft version not indicated |
---|
106 | Local Time is: Wed Jun 30 21:43:24 2010 YEKST |
---|
107 | SMART support is: Available - device has SMART capability. |
---|
108 | SMART support is: Enabled |
---|
109 | |
---|
110 | === START OF READ SMART DATA SECTION === |
---|
111 | SMART overall-health self-assessment test result: PASSED |
---|
112 | |
---|
113 | General SMART Values: |
---|
114 | Offline data collection status: (0x82) Offline data collection activity |
---|
115 | was completed without error. |
---|
116 | Auto Offline Data Collection: Enabled. |
---|
117 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
118 | without error or no self-test has ever |
---|
119 | been run. |
---|
120 | Total time to complete Offline |
---|
121 | data collection: (19560) seconds. |
---|
122 | Offline data collection |
---|
123 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
124 | Auto Offline data collection on/off support. |
---|
125 | Suspend Offline collection upon new |
---|
126 | command. |
---|
127 | Offline surface scan supported. |
---|
128 | Self-test supported. |
---|
129 | Conveyance Self-test supported. |
---|
130 | Selective Self-test supported. |
---|
131 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
132 | power-saving mode. |
---|
133 | Supports SMART auto save timer. |
---|
134 | Error logging capability: (0x01) Error logging supported. |
---|
135 | General Purpose Logging supported. |
---|
136 | Short self-test routine |
---|
137 | recommended polling time: ( 2) minutes. |
---|
138 | Extended self-test routine |
---|
139 | recommended polling time: ( 226) minutes. |
---|
140 | Conveyance self-test routine |
---|
141 | recommended polling time: ( 5) minutes. |
---|
142 | SCT capabilities: (0x303f) SCT Status supported. |
---|
143 | SCT Feature Control supported. |
---|
144 | SCT Data Table supported. |
---|
145 | |
---|
146 | SMART Attributes Data Structure revision number: 16 |
---|
147 | Vendor Specific SMART Attributes with Thresholds: |
---|
148 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
---|
149 | 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 |
---|
150 | 3 Spin_Up_Time 0x0027 118 102 021 Pre-fail Always - 7091 |
---|
151 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 392 |
---|
152 | 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 |
---|
153 | 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 |
---|
154 | 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 6196 |
---|
155 | 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 |
---|
156 | 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 |
---|
157 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 370 |
---|
158 | 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 270 |
---|
159 | 193 Load_Cycle_Count 0x0032 182 182 000 Old_age Always - 54748 |
---|
160 | 194 Temperature_Celsius 0x0022 099 091 000 Old_age Always - 48 |
---|
161 | 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 |
---|
162 | 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1 |
---|
163 | 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1 |
---|
164 | 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 |
---|
165 | 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 |
---|
166 | |
---|
167 | SMART Error Log Version: 1 |
---|
168 | No Errors Logged |
---|
169 | |
---|
170 | SMART Self-test log structure revision number 1 |
---|
171 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
172 | # 1 Short offline Completed: read failure 90% 6186 1951323329 |
---|
173 | # 2 Short offline Completed: read failure 90% 6181 1951323329 |
---|
174 | |
---|
175 | SMART Selective self-test log data structure revision number 1 |
---|
176 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
177 | 1 0 0 Not_testing |
---|
178 | 2 0 0 Not_testing |
---|
179 | 3 0 0 Not_testing |
---|
180 | 4 0 0 Not_testing |
---|
181 | 5 0 0 Not_testing |
---|
182 | Selective self-test flags (0x0): |
---|
183 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
184 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
185 | |
---|
186 | running 'smartctl -a' for drive /dev/sdc |
---|
187 | smartctl 5.39.1 2010-01-28 r3054 [x86_64-pc-linux-gnu] (local build) |
---|
188 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net |
---|
189 | |
---|
190 | === START OF INFORMATION SECTION === |
---|
191 | Model Family: Western Digital Caviar Green family |
---|
192 | Device Model: WDC WD10EADS-65L5B1 |
---|
193 | Serial Number: WD-WCAU49389498 |
---|
194 | Firmware Version: 01.01A01 |
---|
195 | User Capacity: 1 000 204 886 016 bytes |
---|
196 | Device is: In smartctl database [for details use: -P show] |
---|
197 | ATA Version is: 8 |
---|
198 | ATA Standard is: Exact ATA specification draft version not indicated |
---|
199 | Local Time is: Wed Jun 30 21:43:24 2010 YEKST |
---|
200 | SMART support is: Available - device has SMART capability. |
---|
201 | SMART support is: Enabled |
---|
202 | |
---|
203 | === START OF READ SMART DATA SECTION === |
---|
204 | SMART overall-health self-assessment test result: PASSED |
---|
205 | |
---|
206 | General SMART Values: |
---|
207 | Offline data collection status: (0x84) Offline data collection activity |
---|
208 | was suspended by an interrupting command from host. |
---|
209 | Auto Offline Data Collection: Enabled. |
---|
210 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
211 | without error or no self-test has ever |
---|
212 | been run. |
---|
213 | Total time to complete Offline |
---|
214 | data collection: (22800) seconds. |
---|
215 | Offline data collection |
---|
216 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
217 | Auto Offline data collection on/off support. |
---|
218 | Suspend Offline collection upon new |
---|
219 | command. |
---|
220 | Offline surface scan supported. |
---|
221 | Self-test supported. |
---|
222 | Conveyance Self-test supported. |
---|
223 | Selective Self-test supported. |
---|
224 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
225 | power-saving mode. |
---|
226 | Supports SMART auto save timer. |
---|
227 | Error logging capability: (0x01) Error logging supported. |
---|
228 | General Purpose Logging supported. |
---|
229 | Short self-test routine |
---|
230 | recommended polling time: ( 2) minutes. |
---|
231 | Extended self-test routine |
---|
232 | recommended polling time: ( 255) minutes. |
---|
233 | Conveyance self-test routine |
---|
234 | recommended polling time: ( 5) minutes. |
---|
235 | SCT capabilities: (0x303f) SCT Status supported. |
---|
236 | SCT Feature Control supported. |
---|
237 | SCT Data Table supported. |
---|
238 | |
---|
239 | SMART Attributes Data Structure revision number: 16 |
---|
240 | Vendor Specific SMART Attributes with Thresholds: |
---|
241 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
---|
242 | 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 |
---|
243 | 3 Spin_Up_Time 0x0027 174 158 021 Pre-fail Always - 6300 |
---|
244 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 273 |
---|
245 | 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 |
---|
246 | 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 |
---|
247 | 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 8840 |
---|
248 | 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 |
---|
249 | 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 |
---|
250 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 255 |
---|
251 | 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 47 |
---|
252 | 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 273 |
---|
253 | 194 Temperature_Celsius 0x0022 101 095 000 Old_age Always - 49 |
---|
254 | 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 |
---|
255 | 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1 |
---|
256 | 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1 |
---|
257 | 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 |
---|
258 | 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 |
---|
259 | |
---|
260 | SMART Error Log Version: 1 |
---|
261 | No Errors Logged |
---|
262 | |
---|
263 | SMART Self-test log structure revision number 1 |
---|
264 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
265 | # 1 Short offline Completed: read failure 90% 8830 113421466 |
---|
266 | # 2 Short offline Completed: read failure 90% 8830 113421466 |
---|
267 | # 3 Short offline Completed: read failure 90% 8824 113421466 |
---|
268 | # 4 Short offline Completed without error 00% 0 - |
---|
269 | |
---|
270 | SMART Selective self-test log data structure revision number 1 |
---|
271 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
272 | 1 0 0 Not_testing |
---|
273 | 2 0 0 Not_testing |
---|
274 | 3 0 0 Not_testing |
---|
275 | 4 0 0 Not_testing |
---|
276 | 5 0 0 Not_testing |
---|
277 | Selective self-test flags (0x0): |
---|
278 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
279 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
280 | |
---|
281 | running 'smartctl -a' for drive /dev/sdd |
---|
282 | smartctl 5.39.1 2010-01-28 r3054 [x86_64-pc-linux-gnu] (local build) |
---|
283 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net |
---|
284 | |
---|
285 | === START OF INFORMATION SECTION === |
---|
286 | Model Family: Western Digital Caviar SE Serial ATA family |
---|
287 | Device Model: WDC WD3000JS-00PDB0 |
---|
288 | Serial Number: WD-WCAPD2588589 |
---|
289 | Firmware Version: 21.00M21 |
---|
290 | User Capacity: 300 067 970 560 bytes |
---|
291 | Device is: In smartctl database [for details use: -P show] |
---|
292 | ATA Version is: 7 |
---|
293 | ATA Standard is: Exact ATA specification draft version not indicated |
---|
294 | Local Time is: Wed Jun 30 21:43:24 2010 YEKST |
---|
295 | SMART support is: Available - device has SMART capability. |
---|
296 | SMART support is: Enabled |
---|
297 | |
---|
298 | === START OF READ SMART DATA SECTION === |
---|
299 | SMART overall-health self-assessment test result: PASSED |
---|
300 | |
---|
301 | General SMART Values: |
---|
302 | Offline data collection status: (0x82) Offline data collection activity |
---|
303 | was completed without error. |
---|
304 | Auto Offline Data Collection: Enabled. |
---|
305 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
306 | without error or no self-test has ever |
---|
307 | been run. |
---|
308 | Total time to complete Offline |
---|
309 | data collection: (9600) seconds. |
---|
310 | Offline data collection |
---|
311 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
312 | Auto Offline data collection on/off support. |
---|
313 | Suspend Offline collection upon new |
---|
314 | command. |
---|
315 | Offline surface scan supported. |
---|
316 | Self-test supported. |
---|
317 | Conveyance Self-test supported. |
---|
318 | Selective Self-test supported. |
---|
319 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
320 | power-saving mode. |
---|
321 | Supports SMART auto save timer. |
---|
322 | Error logging capability: (0x01) Error logging supported. |
---|
323 | General Purpose Logging supported. |
---|
324 | Short self-test routine |
---|
325 | recommended polling time: ( 2) minutes. |
---|
326 | Extended self-test routine |
---|
327 | recommended polling time: ( 111) minutes. |
---|
328 | Conveyance self-test routine |
---|
329 | recommended polling time: ( 6) minutes. |
---|
330 | SCT capabilities: (0x103f) SCT Status supported. |
---|
331 | SCT Feature Control supported. |
---|
332 | SCT Data Table supported. |
---|
333 | |
---|
334 | SMART Attributes Data Structure revision number: 16 |
---|
335 | Vendor Specific SMART Attributes with Thresholds: |
---|
336 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
---|
337 | 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 10 |
---|
338 | 3 Spin_Up_Time 0x0003 191 176 021 Pre-fail Always - 5450 |
---|
339 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 701 |
---|
340 | 5 Reallocated_Sector_Ct 0x0033 197 197 140 Pre-fail Always - 20 |
---|
341 | 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 |
---|
342 | 9 Power_On_Hours 0x0032 063 063 000 Old_age Always - 27333 |
---|
343 | 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 |
---|
344 | 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 |
---|
345 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 688 |
---|
346 | 194 Temperature_Celsius 0x0022 096 001 000 Old_age Always - 54 |
---|
347 | 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 |
---|
348 | 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 |
---|
349 | 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 |
---|
350 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 479 |
---|
351 | 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 |
---|
352 | |
---|
353 | SMART Error Log Version: 1 |
---|
354 | No Errors Logged |
---|
355 | |
---|
356 | SMART Self-test log structure revision number 1 |
---|
357 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
358 | # 1 Short offline Completed without error 00% 27332 - |
---|
359 | # 2 Short offline Completed without error 00% 14339 - |
---|
360 | # 3 Extended offline Completed without error 00% 1082 - |
---|
361 | |
---|
362 | SMART Selective self-test log data structure revision number 1 |
---|
363 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
364 | 1 0 0 Not_testing |
---|
365 | 2 0 0 Not_testing |
---|
366 | 3 0 0 Not_testing |
---|
367 | 4 0 0 Not_testing |
---|
368 | 5 0 0 Not_testing |
---|
369 | Selective self-test flags (0x0): |
---|
370 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
371 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
372 | |
---|
373 | running 'smartctl -a' for drive /dev/sde |
---|
374 | smartctl 5.39.1 2010-01-28 r3054 [x86_64-pc-linux-gnu] (local build) |
---|
375 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net |
---|
376 | |
---|
377 | === START OF INFORMATION SECTION === |
---|
378 | Model Family: Western Digital Caviar Blue Serial ATA family |
---|
379 | Device Model: WDC WD2500AAJS-00VTA0 |
---|
380 | Serial Number: WD-WMART0626341 |
---|
381 | Firmware Version: 01.01B01 |
---|
382 | User Capacity: 250 058 268 160 bytes |
---|
383 | Device is: In smartctl database [for details use: -P show] |
---|
384 | ATA Version is: 8 |
---|
385 | ATA Standard is: Exact ATA specification draft version not indicated |
---|
386 | Local Time is: Wed Jun 30 21:43:25 2010 YEKST |
---|
387 | SMART support is: Available - device has SMART capability. |
---|
388 | SMART support is: Enabled |
---|
389 | |
---|
390 | === START OF READ SMART DATA SECTION === |
---|
391 | SMART overall-health self-assessment test result: PASSED |
---|
392 | |
---|
393 | General SMART Values: |
---|
394 | Offline data collection status: (0x82) Offline data collection activity |
---|
395 | was completed without error. |
---|
396 | Auto Offline Data Collection: Enabled. |
---|
397 | Self-test execution status: ( 121) The previous self-test completed having |
---|
398 | the read element of the test failed. |
---|
399 | Total time to complete Offline |
---|
400 | data collection: (4980) seconds. |
---|
401 | Offline data collection |
---|
402 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
403 | Auto Offline data collection on/off support. |
---|
404 | Suspend Offline collection upon new |
---|
405 | command. |
---|
406 | Offline surface scan supported. |
---|
407 | Self-test supported. |
---|
408 | Conveyance Self-test supported. |
---|
409 | Selective Self-test supported. |
---|
410 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
411 | power-saving mode. |
---|
412 | Supports SMART auto save timer. |
---|
413 | Error logging capability: (0x01) Error logging supported. |
---|
414 | General Purpose Logging supported. |
---|
415 | Short self-test routine |
---|
416 | recommended polling time: ( 2) minutes. |
---|
417 | Extended self-test routine |
---|
418 | recommended polling time: ( 61) minutes. |
---|
419 | Conveyance self-test routine |
---|
420 | recommended polling time: ( 5) minutes. |
---|
421 | SCT capabilities: (0x303f) SCT Status supported. |
---|
422 | SCT Feature Control supported. |
---|
423 | SCT Data Table supported. |
---|
424 | |
---|
425 | SMART Attributes Data Structure revision number: 16 |
---|
426 | Vendor Specific SMART Attributes with Thresholds: |
---|
427 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
---|
428 | 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 |
---|
429 | 3 Spin_Up_Time 0x0003 175 174 021 Pre-fail Always - 2216 |
---|
430 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 15 |
---|
431 | 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 |
---|
432 | 7 Seek_Error_Rate 0x000e 200 200 000 Old_age Always - 0 |
---|
433 | 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16500 |
---|
434 | 10 Spin_Retry_Count 0x0012 100 253 000 Old_age Always - 0 |
---|
435 | 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 |
---|
436 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 350 |
---|
437 | 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 203 |
---|
438 | 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 350 |
---|
439 | 194 Temperature_Celsius 0x0022 094 077 000 Old_age Always - 49 |
---|
440 | 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 |
---|
441 | 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 6 |
---|
442 | 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 6 |
---|
443 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 |
---|
444 | 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 7 |
---|
445 | |
---|
446 | SMART Error Log Version: 1 |
---|
447 | No Errors Logged |
---|
448 | |
---|
449 | SMART Self-test log structure revision number 1 |
---|
450 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
451 | # 1 Short offline Completed: read failure 90% 16499 22548153 |
---|
452 | # 2 Extended offline Completed without error 00% 8303 - |
---|
453 | # 3 Short offline Completed without error 00% 4291 - |
---|
454 | |
---|
455 | SMART Selective self-test log data structure revision number 1 |
---|
456 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
457 | 1 0 0 Not_testing |
---|
458 | 2 0 0 Not_testing |
---|
459 | 3 0 0 Not_testing |
---|
460 | 4 0 0 Not_testing |
---|
461 | 5 0 0 Not_testing |
---|
462 | Selective self-test flags (0x0): |
---|
463 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
464 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|