Ticket #82: hdparm

File hdparm, 16.7 KB (added by virtuousfox, 11 years ago)

'hdparm -I' output

Line 
1/dev/sda:
2
3ATA device, with non-removable media
4        Model Number:       WDC WD15EARS-00Z5B1
5        Serial Number:      WD-WMAVU1578316
6        Firmware Revision:  80.00A80
7        Transport:          Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
8Standards:
9        Supported: 8 7 6 5
10        Likely used: 8
11Configuration:
12        Logical         max     current
13        cylinders       16383   16383
14        heads           16      16
15        sectors/track   63      63
16        --
17        CHS current addressable sectors:   16514064
18        LBA    user addressable sectors:  268435455
19        LBA48  user addressable sectors: 2930277168
20        Logical/Physical Sector size:           512 bytes
21        device size with M = 1024*1024:     1430799 MBytes
22        device size with M = 1000*1000:     1500301 MBytes (1500 GB)
23        cache/buffer size  = unknown
24Capabilities:
25        LBA, IORDY(can be disabled)
26        Queue depth: 32
27        Standby timer values: spec'd by Standard, with device specific minimum
28        R/W multiple sector transfer: Max = 16  Current = 0
29        Recommended acoustic management value: 128, current value: 254
30        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
31             Cycle time: min=120ns recommended=120ns
32        PIO: pio0 pio1 pio2 pio3 pio4
33             Cycle time: no flow control=120ns  IORDY flow control=120ns
34Commands/features:
35        Enabled Supported:
36           *    SMART feature set
37                Security Mode feature set
38           *    Power Management feature set
39           *    Write cache
40           *    Look-ahead
41           *    Host Protected Area feature set
42           *    WRITE_BUFFER command
43           *    READ_BUFFER command
44           *    NOP cmd
45           *    DOWNLOAD_MICROCODE
46                Power-Up In Standby feature set
47           *    SET_FEATURES required to spinup after power up
48                SET_MAX security extension
49           *    Automatic Acoustic Management feature set
50           *    48-bit Address feature set
51           *    Device Configuration Overlay feature set
52           *    Mandatory FLUSH_CACHE
53           *    FLUSH_CACHE_EXT
54           *    SMART error logging
55           *    SMART self-test
56           *    General Purpose Logging feature set
57           *    64-bit World wide name
58           *    {READ,WRITE}_DMA_EXT_GPL commands
59           *    Segmented DOWNLOAD_MICROCODE
60           *    Gen1 signaling speed (1.5Gb/s)
61           *    Gen2 signaling speed (3.0Gb/s)
62           *    Native Command Queueing (NCQ)
63           *    Host-initiated interface power management
64           *    Phy event counters
65           *    NCQ priority information
66           *    DMA Setup Auto-Activate optimization
67           *    Software settings preservation
68           *    SMART Command Transport (SCT) feature set
69           *    SCT Features Control (AC4)
70           *    SCT Data Tables (AC5)
71                unknown 206[12] (vendor specific)
72                unknown 206[13] (vendor specific)
73Security:
74        Master password revision code = 65534
75                supported
76        not     enabled
77        not     locked
78        not     frozen
79        not     expired: security count
80                supported: enhanced erase
81        330min for SECURITY ERASE UNIT. 330min for ENHANCED SECURITY ERASE UNIT.
82Logical Unit WWN Device Identifier: 50014ee001eed98b
83        NAA             : 5
84        IEEE OUI        : 0014ee
85        Unique ID       : 001eed98b
86Checksum: correct
87
88/dev/sdb:
89
90ATA device, with non-removable media
91        Model Number:       WDC WD10EADS-00M2B0
92        Serial Number:      WD-WCAV51020987
93        Firmware Revision:  01.00A01
94        Transport:          Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
95Standards:
96        Supported: 8 7 6 5
97        Likely used: 8
98Configuration:
99        Logical         max     current
100        cylinders       16383   16383
101        heads           16      16
102        sectors/track   63      63
103        --
104        CHS current addressable sectors:   16514064
105        LBA    user addressable sectors:  268435455
106        LBA48  user addressable sectors: 1953525168
107        Logical/Physical Sector size:           512 bytes
108        device size with M = 1024*1024:      953869 MBytes
109        device size with M = 1000*1000:     1000204 MBytes (1000 GB)
110        cache/buffer size  = unknown
111Capabilities:
112        LBA, IORDY(can be disabled)
113        Queue depth: 32
114        Standby timer values: spec'd by Standard, with device specific minimum
115        R/W multiple sector transfer: Max = 16  Current = 0
116        Recommended acoustic management value: 128, current value: 254
117        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
118             Cycle time: min=120ns recommended=120ns
119        PIO: pio0 pio1 pio2 pio3 pio4
120             Cycle time: no flow control=120ns  IORDY flow control=120ns
121Commands/features:
122        Enabled Supported:
123           *    SMART feature set
124                Security Mode feature set
125           *    Power Management feature set
126           *    Write cache
127           *    Look-ahead
128           *    Host Protected Area feature set
129           *    WRITE_BUFFER command
130           *    READ_BUFFER command
131           *    NOP cmd
132           *    DOWNLOAD_MICROCODE
133                Power-Up In Standby feature set
134           *    SET_FEATURES required to spinup after power up
135                SET_MAX security extension
136                Automatic Acoustic Management feature set
137           *    48-bit Address feature set
138           *    Device Configuration Overlay feature set
139           *    Mandatory FLUSH_CACHE
140           *    FLUSH_CACHE_EXT
141           *    SMART error logging
142           *    SMART self-test
143           *    General Purpose Logging feature set
144           *    64-bit World wide name
145           *    WRITE_UNCORRECTABLE_EXT command
146           *    {READ,WRITE}_DMA_EXT_GPL commands
147           *    Segmented DOWNLOAD_MICROCODE
148           *    Gen1 signaling speed (1.5Gb/s)
149           *    Gen2 signaling speed (3.0Gb/s)
150           *    Native Command Queueing (NCQ)
151           *    Host-initiated interface power management
152           *    Phy event counters
153           *    NCQ priority information
154           *    DMA Setup Auto-Activate optimization
155           *    Software settings preservation
156           *    SMART Command Transport (SCT) feature set
157           *    SCT Long Sector Access (AC1)
158           *    SCT LBA Segment Access (AC2)
159           *    SCT Error Recovery Control (AC3)
160           *    SCT Features Control (AC4)
161           *    SCT Data Tables (AC5)
162                unknown 206[12] (vendor specific)
163                unknown 206[13] (vendor specific)
164Security:
165        Master password revision code = 65534
166                supported
167        not     enabled
168        not     locked
169        not     frozen
170        not     expired: security count
171                supported: enhanced erase
172        198min for SECURITY ERASE UNIT. 198min for ENHANCED SECURITY ERASE UNIT.
173Logical Unit WWN Device Identifier: 50014ee25881840c
174        NAA             : 5
175        IEEE OUI        : 0014ee
176        Unique ID       : 25881840c
177Checksum: correct
178
179/dev/sdc:
180
181ATA device, with non-removable media
182        Model Number:       WDC WD10EADS-65L5B1
183        Serial Number:      WD-WCAU49389498
184        Firmware Revision:  01.01A01
185        Transport:          Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
186Standards:
187        Supported: 8 7 6 5
188        Likely used: 8
189Configuration:
190        Logical         max     current
191        cylinders       16383   16383
192        heads           16      16
193        sectors/track   63      63
194        --
195        CHS current addressable sectors:   16514064
196        LBA    user addressable sectors:  268435455
197        LBA48  user addressable sectors: 1953525168
198        Logical/Physical Sector size:           512 bytes
199        device size with M = 1024*1024:      953869 MBytes
200        device size with M = 1000*1000:     1000204 MBytes (1000 GB)
201        cache/buffer size  = unknown
202Capabilities:
203        LBA, IORDY(can be disabled)
204        Queue depth: 32
205        Standby timer values: spec'd by Standard, with device specific minimum
206        R/W multiple sector transfer: Max = 16  Current = 0
207        Recommended acoustic management value: 128, current value: 128
208        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
209             Cycle time: min=120ns recommended=120ns
210        PIO: pio0 pio1 pio2 pio3 pio4
211             Cycle time: no flow control=120ns  IORDY flow control=120ns
212Commands/features:
213        Enabled Supported:
214           *    SMART feature set
215           *    Power Management feature set
216           *    Write cache
217           *    Look-ahead
218           *    WRITE_BUFFER command
219           *    READ_BUFFER command
220           *    NOP cmd
221           *    DOWNLOAD_MICROCODE
222                Power-Up In Standby feature set
223           *    SET_FEATURES required to spinup after power up
224                Automatic Acoustic Management feature set
225           *    48-bit Address feature set
226           *    Device Configuration Overlay feature set
227           *    Mandatory FLUSH_CACHE
228           *    FLUSH_CACHE_EXT
229           *    SMART error logging
230           *    SMART self-test
231           *    General Purpose Logging feature set
232           *    64-bit World wide name
233           *    Segmented DOWNLOAD_MICROCODE
234           *    Gen1 signaling speed (1.5Gb/s)
235           *    Gen2 signaling speed (3.0Gb/s)
236           *    Native Command Queueing (NCQ)
237           *    Phy event counters
238           *    DMA Setup Auto-Activate optimization
239                Device-initiated interface power management
240           *    Software settings preservation
241           *    SMART Command Transport (SCT) feature set
242           *    SCT Long Sector Access (AC1)
243           *    SCT LBA Segment Access (AC2)
244           *    SCT Error Recovery Control (AC3)
245           *    SCT Features Control (AC4)
246           *    SCT Data Tables (AC5)
247                unknown 206[12] (vendor specific)
248                unknown 206[13] (vendor specific)
249Security:
250        232min for SECURITY ERASE UNIT.
251Logical Unit WWN Device Identifier: 50014ee25809f5f1
252        NAA             : 5
253        IEEE OUI        : 0014ee
254        Unique ID       : 25809f5f1
255Checksum: correct
256
257/dev/sdd:
258
259ATA device, with non-removable media
260        Model Number:       WDC WD3000JS-00PDB0
261        Serial Number:      WD-WCAPD2588589
262        Firmware Revision:  21.00M21
263Standards:
264        Supported: 7 6 5 4
265        Likely used: 8
266Configuration:
267        Logical         max     current
268        cylinders       16383   16383
269        heads           16      16
270        sectors/track   63      63
271        --
272        CHS current addressable sectors:   16514064
273        LBA    user addressable sectors:  268435455
274        LBA48  user addressable sectors:  586070255
275        Logical/Physical Sector size:           512 bytes
276        device size with M = 1024*1024:      286167 MBytes
277        device size with M = 1000*1000:      300067 MBytes (300 GB)
278        cache/buffer size  = 8192 KBytes
279Capabilities:
280        LBA, IORDY(can be disabled)
281        Queue depth: 1
282        Standby timer values: spec'd by Standard, with device specific minimum
283        R/W multiple sector transfer: Max = 16  Current = 0
284        Recommended acoustic management value: 128, current value: 254
285        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
286             Cycle time: min=120ns recommended=120ns
287        PIO: pio0 pio1 pio2 pio3 pio4
288             Cycle time: no flow control=120ns  IORDY flow control=120ns
289Commands/features:
290        Enabled Supported:
291           *    SMART feature set
292                Security Mode feature set
293           *    Power Management feature set
294           *    Write cache
295           *    Look-ahead
296           *    Host Protected Area feature set
297           *    WRITE_BUFFER command
298           *    READ_BUFFER command
299           *    NOP cmd
300           *    DOWNLOAD_MICROCODE
301                Power-Up In Standby feature set
302           *    SET_FEATURES required to spinup after power up
303                SET_MAX security extension
304           *    Automatic Acoustic Management feature set
305           *    48-bit Address feature set
306           *    Device Configuration Overlay feature set
307           *    Mandatory FLUSH_CACHE
308           *    FLUSH_CACHE_EXT
309           *    SMART error logging
310           *    SMART self-test
311           *    General Purpose Logging feature set
312           *    Gen1 signaling speed (1.5Gb/s)
313           *    Gen2 signaling speed (3.0Gb/s)
314           *    Native Command Queueing (NCQ)
315           *    Host-initiated interface power management
316           *    Phy event counters
317           *    DMA Setup Auto-Activate optimization
318           *    Software settings preservation
319           *    SMART Command Transport (SCT) feature set
320           *    SCT Long Sector Access (AC1)
321           *    SCT LBA Segment Access (AC2)
322           *    SCT Error Recovery Control (AC3)
323           *    SCT Features Control (AC4)
324           *    SCT Data Tables (AC5)
325                unknown 206[12] (vendor specific)
326Security:
327        Master password revision code = 65534
328                supported
329        not     enabled
330        not     locked
331        not     frozen
332        not     expired: security count
333        not     supported: enhanced erase
334Checksum: correct
335
336/dev/sde:
337
338ATA device, with non-removable media
339        Model Number:       WDC WD2500AAJS-00VTA0
340        Serial Number:      WD-WMART0626341
341        Firmware Revision:  01.01B01
342Standards:
343        Supported: 8 7 6 5
344        Likely used: 8
345Configuration:
346        Logical         max     current
347        cylinders       16383   16383
348        heads           16      16
349        sectors/track   63      63
350        --
351        CHS current addressable sectors:   16514064
352        LBA    user addressable sectors:  268435455
353        LBA48  user addressable sectors:  488395055
354        Logical/Physical Sector size:           512 bytes
355        device size with M = 1024*1024:      238474 MBytes
356        device size with M = 1000*1000:      250058 MBytes (250 GB)
357        cache/buffer size  = 8192 KBytes
358Capabilities:
359        LBA, IORDY(can be disabled)
360        Queue depth: 32
361        Standby timer values: spec'd by Standard, with device specific minimum
362        R/W multiple sector transfer: Max = 16  Current = 0
363        Recommended acoustic management value: 128, current value: 254
364        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
365             Cycle time: min=120ns recommended=120ns
366        PIO: pio0 pio1 pio2 pio3 pio4
367             Cycle time: no flow control=120ns  IORDY flow control=120ns
368Commands/features:
369        Enabled Supported:
370           *    SMART feature set
371                Security Mode feature set
372           *    Power Management feature set
373           *    Write cache
374           *    Look-ahead
375           *    Host Protected Area feature set
376           *    WRITE_BUFFER command
377           *    READ_BUFFER command
378           *    NOP cmd
379           *    DOWNLOAD_MICROCODE
380                Power-Up In Standby feature set
381           *    SET_FEATURES required to spinup after power up
382                SET_MAX security extension
383           *    Automatic Acoustic Management feature set
384           *    48-bit Address feature set
385           *    Device Configuration Overlay feature set
386           *    Mandatory FLUSH_CACHE
387           *    FLUSH_CACHE_EXT
388           *    SMART error logging
389           *    SMART self-test
390           *    General Purpose Logging feature set
391           *    64-bit World wide name
392           *    Segmented DOWNLOAD_MICROCODE
393           *    Gen1 signaling speed (1.5Gb/s)
394           *    Gen2 signaling speed (3.0Gb/s)
395           *    Native Command Queueing (NCQ)
396           *    Host-initiated interface power management
397           *    Phy event counters
398           *    DMA Setup Auto-Activate optimization
399           *    Software settings preservation
400           *    SMART Command Transport (SCT) feature set
401           *    SCT Long Sector Access (AC1)
402           *    SCT LBA Segment Access (AC2)
403           *    SCT Error Recovery Control (AC3)
404           *    SCT Features Control (AC4)
405           *    SCT Data Tables (AC5)
406                unknown 206[12] (vendor specific)
407                unknown 206[13] (vendor specific)
408Security:
409        Master password revision code = 65534
410                supported
411        not     enabled
412        not     locked
413        not     frozen
414        not     expired: security count
415                supported: enhanced erase
416        50min for SECURITY ERASE UNIT. 50min for ENHANCED SECURITY ERASE UNIT.
417Logical Unit WWN Device Identifier: 50014ee0ab0d3f61
418        NAA             : 5
419        IEEE OUI        : 0014ee
420        Unique ID       : 0ab0d3f61
421Checksum: correct