Ticket #801: smartctl-kingston-a400.txt

File smartctl-kingston-a400.txt, 9.6 KB (added by Matthew Eaton, 7 years ago)
Line 
1smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.0-59-generic] (local build)
2Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: KINGSTON SA400S37240G
6Serial Number: 50026B726A024F4F
7LU WWN Device Id: 5 000000 000000000
8Firmware Version: SBFK10D7
9User Capacity: 240,057,409,536 bytes [240 GB]
10Sector Size: 512 bytes logical/physical
11Rotation Rate: Solid State Device
12Form Factor: 2.5 inches
13Device is: Not in smartctl database [for details use: -P showall]
14ATA Version is: Unknown(0x0ff8) (minor revision not indicated)
15SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
16Local Time is: Thu Jan 26 12:36:12 2017 PST
17SMART support is: Available - device has SMART capability.
18SMART support is: Enabled
19AAM feature is: Unavailable
20APM feature is: Unavailable
21Rd look-ahead is: Enabled
22Write cache is: Enabled
23ATA Security is: Disabled, NOT FROZEN [SEC1]
24Wt Cache Reorder: Unavailable
25
26=== START OF READ SMART DATA SECTION ===
27SMART overall-health self-assessment test result: PASSED
28
29General SMART Values:
30Offline data collection status: (0x00) Offline data collection activity
31 was never started.
32 Auto Offline Data Collection: Disabled.
33Self-test execution status: ( 0) The previous self-test routine completed
34 without error or no self-test has ever
35 been run.
36Total time to complete Offline
37data collection: (65535) seconds.
38Offline data collection
39capabilities: (0x79) SMART execute Offline immediate.
40 No Auto Offline data collection support.
41 Suspend Offline collection upon new
42 command.
43 Offline surface scan supported.
44 Self-test supported.
45 Conveyance Self-test supported.
46 Selective Self-test supported.
47SMART capabilities: (0x0003) Saves SMART data before entering
48 power-saving mode.
49 Supports SMART auto save timer.
50Error logging capability: (0x01) Error logging supported.
51 General Purpose Logging supported.
52Short self-test routine
53recommended polling time: ( 4) minutes.
54Extended self-test routine
55recommended polling time: ( 32) minutes.
56Conveyance self-test routine
57recommended polling time: ( 8) minutes.
58
59SMART Attributes Data Structure revision number: 16
60Vendor Specific SMART Attributes with Thresholds:
61ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
62 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0
63 9 Power_On_Hours -O--C- 100 100 000 - 424
64 12 Power_Cycle_Count -O--C- 100 100 000 - 2559
65167 Unknown_Attribute -O---K 100 100 000 - 0
66168 Unknown_Attribute -O--C- 100 100 000 - 0
67169 Unknown_Attribute ------ 100 100 000 - 7
68170 Unknown_Attribute PO--C- 100 100 010 - 14
69172 Unknown_Attribute -O--CK 100 100 000 - 0
70173 Unknown_Attribute ------ 100 100 000 - 9765067
71181 Program_Fail_Cnt_Total -O--C- 100 100 000 - 0
72187 Reported_Uncorrect -O--CK 100 100 000 - 0
73192 Power-Off_Retract_Count -O--C- 100 100 000 - 2445
74194 Temperature_Celsius PO---K 074 058 000 - 26 (Min/Max 21/42)
75196 Reallocated_Event_Count ------ 100 100 000 - 0
76199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
77218 Unknown_Attribute ------ 100 100 000 - 10
78231 Temperature_Celsius PO--C- 100 100 000 - 85
79233 Media_Wearout_Indicator PO--C- 100 100 000 - 23602
80241 Total_LBAs_Written -O--C- 100 100 000 - 34389
81242 Total_LBAs_Read -O--C- 100 100 000 - 14497
82244 Unknown_Attribute ------ 100 100 000 - 149
83245 Unknown_Attribute ------ 100 100 000 - 203
84246 Unknown_Attribute ------ 100 100 000 - 6541760
85 ||||||_ K auto-keep
86 |||||__ C event count
87 ||||___ R error rate
88 |||____ S speed/performance
89 ||_____ O updated online
90 |______ P prefailure warning
91
92General Purpose Log Directory Version 1
93SMART Log Directory Version 1 [multi-sector log support]
94Address Access R/W Size Description
950x00 GPL,SL R/O 1 Log Directory
960x01 SL R/O 1 Summary SMART error log
970x02 SL R/O 51 Comprehensive SMART error log
980x03 GPL R/O 64 Ext. Comprehensive SMART error log
990x04 GPL,SL R/O 8 Device Statistics log
1000x06 SL R/O 1 SMART self-test log
1010x07 GPL R/O 1 Extended self-test log
1020x09 SL R/W 1 Selective self-test log
1030x10 GPL R/O 1 SATA NCQ Queued Error log
1040x11 GPL R/O 1 SATA Phy Event Counters log
1050x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1060x80-0x9f GPL,SL R/W 16 Host vendor specific log
107
108SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
109Device Error Count: 1
110 CR = Command Register
111 FEATR = Features Register
112 COUNT = Count (was: Sector Count) Register
113 LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
114 LH = LBA High (was: Cylinder High) Register ] LBA
115 LM = LBA Mid (was: Cylinder Low) Register ] Register
116 LL = LBA Low (was: Sector Number) Register ]
117 DV = Device (was: Device/Head) Register
118 DC = Device Control Register
119 ER = Error register
120 ST = Status register
121Powered_Up_Time is measured from power on, and printed as
122DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
123SS=sec, and sss=millisec. It "wraps" after 49.710 days.
124
125Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
126 When the command that caused the error occurred, the device was active or idle.
127
128 After command completion occurred, registers were:
129 ER -- ST COUNT LBA_48 LH LM LL DV DC
130 -- -- -- == -- == == == -- -- -- -- --
131 84 -- 51 08 00 00 00 02 c2 53 c8 40 00 Error: ICRC, ABRT 2048 sectors at LBA = 0x02c253c8 = 46289864
132
133 Commands leading to the command that caused the error were:
134 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
135 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
136 35 00 00 08 00 00 00 02 c2 53 c8 40 00 00:00:00.000 WRITE DMA EXT
137 ef 00 10 00 02 00 00 00 00 00 00 00 00 00:00:00.000 SET FEATURES [Enable SATA feature]
138 ef 00 02 00 00 00 00 00 00 00 00 00 00 00:00:00.000 SET FEATURES [Enable write cache]
139 ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:00:00.000 SET FEATURES [Enable read look-ahead]
140 ef 00 03 00 46 00 00 00 00 00 00 00 00 00:00:00.000 SET FEATURES [Set transfer mode]
141
142SMART Extended Self-test Log Version: 1 (1 sectors)
143Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
144# 1 Short offline Completed without error 00% 424 -
145
146SMART Selective self-test log data structure revision number 0
147Note: revision number not 1 implies that no selective self-test has ever been run
148 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
149 1 0 0 Not_testing
150 2 0 0 Not_testing
151 3 0 0 Not_testing
152 4 0 0 Not_testing
153 5 0 0 Not_testing
154Selective self-test flags (0x0):
155 After scanning selected spans, do NOT read-scan remainder of disk.
156If Selective self-test is pending on power-up, resume after 0 minute delay.
157
158SCT Commands not supported
159
160Device Statistics (GP Log 0x04)
161Page Offset Size Value Flags Description
1620x01 ===== = = === == General Statistics (rev 1) ==
1630x01 0x008 4 2559 --- Lifetime Power-On Resets
1640x01 0x010 4 424 --- Power-on Hours
1650x01 0x018 6 72119417008 --- Logical Sectors Written
1660x01 0x028 6 30403531648 --- Logical Sectors Read
1670x04 ===== = = === == General Errors Statistics (rev 1) ==
1680x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
1690x05 ===== = = === == Temperature Statistics (rev 1) ==
1700x05 0x008 1 26 --- Current Temperature
1710x05 0x020 1 42 --- Highest Temperature
1720x05 0x028 1 21 --- Lowest Temperature
1730x06 ===== = = === == Transport Statistics (rev 1) ==
1740x06 0x018 4 10 --- Number of Interface CRC Errors
1750x07 ===== = = === == Solid State Device Statistics (rev 1) ==
1760x07 0x008 1 14 --- Percentage Used Endurance Indicator
177 |||_ C monitored condition met
178 ||__ D supports DSN
179 |___ N normalized value
180
181SATA Phy Event Counters (GP Log 0x11)
182ID Size Value Description
1830x0001 2 0 Command failed due to ICRC error
1840x0003 2 0 R_ERR response for device-to-host data FIS
1850x0004 2 0 R_ERR response for host-to-device data FIS
1860x0006 2 0 R_ERR response for device-to-host non-data FIS
1870x0007 2 0 R_ERR response for host-to-device non-data FIS
1880x0008 2 0 Device-to-host non-data FIS retries
1890x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
1900x000a 4 1 Device-to-host register FISes sent due to a COMRESET
1910x000f 2 0 R_ERR response for host-to-device data FIS, CRC
1920x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
1930x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
1940x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
195