Ticket #777: smartctl-HP-MB4000GCWLV.txt

File smartctl-HP-MB4000GCWLV.txt, 16.5 KB (added by mara43, 7 years ago)
Line 
1smartctl 6.5 2016-10-23 r4352 [x86_64-linux-4.4.36-218-x86_64] (local build)
2Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model:     MB4000GCWLV
6Firmware Version: HPG3
7User Capacity:    4,000,787,030,016 bytes [4.00 TB]
8Sector Size:      512 bytes logical/physical
9Rotation Rate:    7200 rpm
10Form Factor:      3.5 inches
11Device is:        Not in smartctl database [for details use: -P showall]
12ATA Version is:   ATA8-ACS T13/1699-D revision 6
13SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
14Local Time is:    Thu Dec  8 18:57:48 2016 IST
15SMART support is: Available - device has SMART capability.
16SMART support is: Enabled
17AAM feature is:   Unavailable
18APM feature is:   Unavailable
19Rd look-ahead is: Enabled
20Write cache is:   Disabled
21ATA Security is:  Unavailable
22Wt Cache Reorder: Enabled
23
24=== START OF READ SMART DATA SECTION ===
25SMART overall-health self-assessment test result: PASSED
26
27General SMART Values:
28Offline data collection status:  (0x85) Offline data collection activity
29                                        was aborted by an interrupting command from host.
30                                        Auto Offline Data Collection: Enabled.
31Self-test execution status:      (   0) The previous self-test routine completed
32                                        without error or no self-test has ever
33                                        been run.
34Total time to complete Offline
35data collection:                (   24) seconds.
36Offline data collection
37capabilities:                    (0x5b) SMART execute Offline immediate.
38                                        Auto Offline data collection on/off support.
39                                        Suspend Offline collection upon new
40                                        command.
41                                        Offline surface scan supported.
42                                        Self-test supported.
43                                        No Conveyance Self-test supported.
44                                        Selective Self-test supported.
45SMART capabilities:            (0x0003) Saves SMART data before entering
46                                        power-saving mode.
47                                        Supports SMART auto save timer.
48Error logging capability:        (0x01) Error logging supported.
49                                        General Purpose Logging supported.
50Short self-test routine
51recommended polling time:        (   2) minutes.
52Extended self-test routine
53recommended polling time:        ( 540) minutes.
54SCT capabilities:              (0x003d) SCT Status supported.
55                                        SCT Error Recovery Control supported.
56                                        SCT Feature Control supported.
57                                        SCT Data Table supported.
58
59SMART Attributes Data Structure revision number: 16
60Vendor Specific SMART Attributes with Thresholds:
61ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
62  1 Raw_Read_Error_Rate     POSR-K   100   100   016    -    0
63  2 Throughput_Performance  POS--K   138   100   054    -    74
64  3 Spin_Up_Time            PO---K   144   100   024    -    582 (Average 494)
65  4 Start_Stop_Count        -O--CK   100   100   000    -    13
66  5 Reallocated_Sector_Ct   PO--CK   100   100   005    -    4 (0 4)
67  7 Seek_Error_Rate         POSR-K   100   100   067    -    0
68  8 Seek_Time_Performance   P-S--K   140   100   020    -    26
69  9 Power_On_Hours          -O--CK   100   100   000    -    2771
70 10 Spin_Retry_Count        PO--CK   100   100   060    -    0
71 12 Power_Cycle_Count       -O--CK   100   100   000    -    13
72180 Unknown_HDD_Attribute   PO-R-K   100   100   098    -    0
73183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
74185 Unknown_Attribute       -O--CK   099   099   000    -    102366
75187 Reported_Uncorrect      -O--CK   100   100   000    -    0
76188 Command_Timeout         -O--CK   100   100   000    -    0
77189 High_Fly_Writes         -O-RCK   100   100   000    -    0
78190 Airflow_Temperature_Cel -O---K   070   061   000    -    30 (Min/Max 28/36)
79192 Power-Off_Retract_Count -O--CK   100   100   000    -    124
80193 Load_Cycle_Count        -O--CK   100   100   000    -    124
81194 Temperature_Celsius     -O---K   200   166   000    -    30 (Min/Max 20/39)
82196 Reallocated_Event_Count PO--CK   100   100   000    -    4
83197 Current_Pending_Sector  -O--CK   100   100   000    -    0
84198 Offline_Uncorrectable   ----CK   100   100   000    -    0
85199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
86                            ||||||_ K auto-keep
87                            |||||__ C event count
88                            ||||___ R error rate
89                            |||____ S speed/performance
90                            ||_____ O updated online
91                            |______ P prefailure warning
92
93General Purpose Log Directory Version 1
94SMART           Log Directory Version 1 [multi-sector log support]
95Address    Access  R/W   Size  Description
960x00       GPL,SL  R/O      1  Log Directory
970x01           SL  R/O      1  Summary SMART error log
980x02           SL  R/O      1  Comprehensive SMART error log
990x03       GPL     R/O      1  Ext. Comprehensive SMART error log
1000x04       GPL,SL  R/O      7  Device Statistics log
1010x06           SL  R/O      1  SMART self-test log
1020x07       GPL     R/O      1  Extended self-test log
1030x08       GPL     R/O      2  Power Conditions log
1040x09           SL  R/W      1  Selective self-test log
1050x10       GPL     R/O      1  SATA NCQ Queued Error log
1060x11       GPL     R/O      1  SATA Phy Event Counters log
1070x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
1080xb6       GPL     VS     127  Device vendor specific log
1090xe0       GPL,SL  R/W      1  SCT Command/Status
1100xe1       GPL,SL  R/W      1  SCT Data Transfer
111
112SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
113Device Error Count: 35 (device log contains only the most recent 4 errors)
114        CR     = Command Register
115        FEATR  = Features Register
116        COUNT  = Count (was: Sector Count) Register
117        LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
118        LH     = LBA High (was: Cylinder High) Register    ]   LBA
119        LM     = LBA Mid (was: Cylinder Low) Register      ] Register
120        LL     = LBA Low (was: Sector Number) Register     ]
121        DV     = Device (was: Device/Head) Register
122        DC     = Device Control Register
123        ER     = Error register
124        ST     = Status register
125Powered_Up_Time is measured from power on, and printed as
126DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
127SS=sec, and sss=millisec. It "wraps" after 49.710 days.
128
129Error 35 [2] occurred at disk power-on lifetime: 2696 hours (112 days + 8 hours)
130  When the command that caused the error occurred, the device was active or idle.
131
132  After command completion occurred, registers were:
133  ER -- ST COUNT  LBA_48  LH LM LL DV DC
134  -- -- -- == -- == == == -- -- -- -- --
135  04 -- 51 00 00 00 00 00 00 00 00 00 00  Error: ABRT
136
137  Commands leading to the command that caused the error were:
138  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
139  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
140  ef 00 90 00 03 00 00 00 00 00 00 00 00  4d+10:23:49.054  SET FEATURES [Disable SATA feature]
141  ef 00 03 00 45 00 00 00 00 00 00 00 00  4d+10:23:49.054  SET FEATURES [Set transfer mode]
142  c6 00 00 00 10 00 00 00 00 00 00 00 00  4d+10:23:49.053  SET MULTIPLE MODE
143  ef 00 03 00 0c 00 00 00 00 00 00 00 00  4d+10:23:49.052  SET FEATURES [Set transfer mode]
144  ec 00 00 00 00 00 00 00 00 00 00 00 00  4d+10:23:49.050  IDENTIFY DEVICE
145
146Error 34 [1] occurred at disk power-on lifetime: 2603 hours (108 days + 11 hours)
147  When the command that caused the error occurred, the device was active or idle.
148
149  After command completion occurred, registers were:
150  ER -- ST COUNT  LBA_48  LH LM LL DV DC
151  -- -- -- == -- == == == -- -- -- -- --
152  04 -- 51 00 00 00 00 00 00 00 00 00 00  Error: ABRT
153
154  Commands leading to the command that caused the error were:
155  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
156  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
157  ef 00 90 00 03 00 00 00 00 00 00 00 00     13:47:37.093  SET FEATURES [Disable SATA feature]
158  ef 00 03 00 45 00 00 00 00 00 00 00 00     13:47:37.092  SET FEATURES [Set transfer mode]
159  c6 00 00 00 10 00 00 00 00 00 00 00 00     13:47:37.092  SET MULTIPLE MODE
160  ef 00 03 00 0c 00 00 00 00 00 00 00 00     13:47:37.091  SET FEATURES [Set transfer mode]
161  ec 00 00 00 00 00 00 00 00 00 00 00 00     13:47:37.089  IDENTIFY DEVICE
162
163Error 33 [0] occurred at disk power-on lifetime: 2572 hours (107 days + 4 hours)
164  When the command that caused the error occurred, the device was active or idle.
165
166  After command completion occurred, registers were:
167  ER -- ST COUNT  LBA_48  LH LM LL DV DC
168  -- -- -- == -- == == == -- -- -- -- --
169  04 -- 51 00 00 00 00 00 00 00 00 00 00  Error: ABRT
170
171  Commands leading to the command that caused the error were:
172  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
173  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
174  ef 00 90 00 03 00 00 00 00 00 00 00 00  5d+11:50:20.052  SET FEATURES [Disable SATA feature]
175  ef 00 03 00 45 00 00 00 00 00 00 00 00  5d+11:50:20.052  SET FEATURES [Set transfer mode]
176  c6 00 00 00 10 00 00 00 00 00 00 00 00  5d+11:50:20.051  SET MULTIPLE MODE
177  ef 00 03 00 0c 00 00 00 00 00 00 00 00  5d+11:50:20.051  SET FEATURES [Set transfer mode]
178  ec 00 00 00 00 00 00 00 00 00 00 00 00  5d+11:50:20.048  IDENTIFY DEVICE
179
180Error 32 [3] occurred at disk power-on lifetime: 2552 hours (106 days + 8 hours)
181  When the command that caused the error occurred, the device was active or idle.
182
183  After command completion occurred, registers were:
184  ER -- ST COUNT  LBA_48  LH LM LL DV DC
185  -- -- -- == -- == == == -- -- -- -- --
186  04 -- 51 00 00 00 00 00 00 00 00 00 00  Error: ABRT
187
188  Commands leading to the command that caused the error were:
189  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
190  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
191  ef 00 90 00 03 00 00 00 00 00 00 00 00  4d+15:35:14.471  SET FEATURES [Disable SATA feature]
192  ef 00 03 00 45 00 00 00 00 00 00 00 00  4d+15:35:14.470  SET FEATURES [Set transfer mode]
193  c6 00 00 00 10 00 00 00 00 00 00 00 00  4d+15:35:14.470  SET MULTIPLE MODE
194  ef 00 03 00 0c 00 00 00 00 00 00 00 00  4d+15:35:14.469  SET FEATURES [Set transfer mode]
195  ec 00 00 00 00 00 00 00 00 00 00 00 00  4d+15:35:14.467  IDENTIFY DEVICE
196
197SMART Extended Self-test Log Version: 1 (1 sectors)
198Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
199# 1  Short offline       Completed without error       00%      2771         -
200# 2  Short offline       Completed without error       00%      2757         -
201# 3  Short offline       Completed without error       00%      2733         -
202# 4  Short offline       Completed without error       00%      2709         -
203# 5  Short offline       Completed without error       00%      2685         -
204# 6  Short offline       Completed without error       00%      2661         -
205# 7  Short offline       Completed without error       00%      2637         -
206# 8  Short offline       Completed without error       00%      2613         -
207# 9  Short offline       Completed without error       00%      2589         -
208#10  Short offline       Completed without error       00%      2565         -
209#11  Short offline       Completed without error       00%      2541         -
210#12  Short offline       Completed without error       00%      2517         -
211#13  Short offline       Completed without error       00%      2493         -
212#14  Short offline       Completed without error       00%      2469         -
213#15  Short offline       Completed without error       00%      2445         -
214#16  Short offline       Completed without error       00%      2421         -
215#17  Short offline       Completed without error       00%      2397         -
216#18  Short offline       Completed without error       00%      2379         -
217#19  Short offline       Completed without error       00%      2354         -
218
219SMART Selective self-test log data structure revision number 1
220 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
221    1        0        0  Not_testing
222    2        0        0  Not_testing
223    3        0        0  Not_testing
224    4        0        0  Not_testing
225    5        0        0  Not_testing
226Selective self-test flags (0x0):
227  After scanning selected spans, do NOT read-scan remainder of disk.
228If Selective self-test is pending on power-up, resume after 0 minute delay.
229
230SCT Status Version:                  3
231SCT Version (vendor specific):       256 (0x0100)
232SCT Support Level:                   1
233Device State:                        Active (0)
234Current Temperature:                    30 Celsius
235Power Cycle Min/Max Temperature:     28/36 Celsius
236Lifetime    Min/Max Temperature:     20/39 Celsius
237Under/Over Temperature Limit Count:   0/0
238
239SCT Temperature History Version:     2
240Temperature Sampling Period:         1 minute
241Temperature Logging Interval:        1 minute
242Min/Max recommended Temperature:      0/60 Celsius
243Min/Max Temperature Limit:           -40/70 Celsius
244Temperature History Size (Index):    128 (101)
245
246Index    Estimated Time   Temperature Celsius
247 102    2016-12-08 16:50    31  ************
248 ...    ..( 88 skipped).    ..  ************
249  63    2016-12-08 18:19    31  ************
250  64    2016-12-08 18:20    30  ***********
251 ...    ..( 15 skipped).    ..  ***********
252  80    2016-12-08 18:36    30  ***********
253  81    2016-12-08 18:37    29  **********
254  82    2016-12-08 18:38    29  **********
255  83    2016-12-08 18:39    29  **********
256  84    2016-12-08 18:40    30  ***********
257 ...    ..( 16 skipped).    ..  ***********
258 101    2016-12-08 18:57    30  ***********
259
260SCT Error Recovery Control:
261           Read:     50 (5.0 seconds)
262          Write:     50 (5.0 seconds)
263
264Device Statistics (GP Log 0x04)
265Page  Offset Size        Value Flags Description
2660x01  =====  =               =  ===  == General Statistics (rev 2) ==
2670x01  0x008  4              13  ---  Lifetime Power-On Resets
2680x01  0x018  6      3447478760  ---  Logical Sectors Written
2690x01  0x020  6        28470735  ---  Number of Write Commands
2700x01  0x028  6      2042655127  ---  Logical Sectors Read
2710x01  0x030  6         8359900  ---  Number of Read Commands
2720x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
2730x03  0x008  4            2770  ---  Spindle Motor Power-on Hours
2740x03  0x010  4            2770  ---  Head Flying Hours
2750x03  0x018  4             124  ---  Head Load Events
2760x03  0x020  4               4  ---  Number of Reallocated Logical Sectors
2770x03  0x028  4               0  ---  Read Recovery Attempts
2780x03  0x030  4               0  ---  Number of Mechanical Start Failures
2790x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
2800x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
2810x04  0x010  4               0  ---  Resets Between Cmd Acceptance and Completion
2820x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
2830x05  0x008  1              30  ---  Current Temperature
2840x05  0x010  1              30  N--  Average Short Term Temperature
2850x05  0x018  1              30  N--  Average Long Term Temperature
2860x05  0x020  1              39  ---  Highest Temperature
2870x05  0x028  1              20  ---  Lowest Temperature
2880x05  0x030  1              34  N--  Highest Average Short Term Temperature
2890x05  0x038  1              25  N--  Lowest Average Short Term Temperature
2900x05  0x040  1              33  N--  Highest Average Long Term Temperature
2910x05  0x048  1              25  N--  Lowest Average Long Term Temperature
2920x05  0x050  4               0  ---  Time in Over-Temperature
2930x05  0x058  1              60  ---  Specified Maximum Operating Temperature
2940x05  0x060  4               0  ---  Time in Under-Temperature
2950x05  0x068  1               0  ---  Specified Minimum Operating Temperature
2960x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
2970x06  0x008  4              84  ---  Number of Hardware Resets
2980x06  0x010  4              82  ---  Number of ASR Events
2990x06  0x018  4               0  ---  Number of Interface CRC Errors
300                                |||_ C monitored condition met
301                                ||__ D supports DSN
302                                |___ N normalized value
303
304SATA Phy Event Counters (GP Log 0x11)
305ID      Size     Value  Description
3060x0001  2            0  Command failed due to ICRC error
3070x0002  2            0  R_ERR response for data FIS
3080x0003  2            0  R_ERR response for device-to-host data FIS
3090x0004  2            0  R_ERR response for host-to-device data FIS
3100x0005  2            0  R_ERR response for non-data FIS
3110x0006  2            0  R_ERR response for device-to-host non-data FIS
3120x0007  2            0  R_ERR response for host-to-device non-data FIS
3130x0009  2           21  Transition from drive PhyRdy to drive PhyNRdy
3140x000a  2           20  Device-to-host register FISes sent due to a COMRESET
3150x000b  2            0  CRC errors within host-to-device FIS
3160x000d  2            0  Non-CRC errors within host-to-device FIS
317